KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Load Transfer Characteristics of Barrette Pile Based on Bi-directional Loading Tests

양방향 재하시험결과를 활용한 바렛말뚝의 하중전이특성 평가

  • 박성완 (삼보E&C(주) 기술연구소) ;
  • 임대성 (단국대학교 토목환경공학과)
  • Received : 2008.10.02
  • Accepted : 2009.02.05
  • Published : 2009.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Due to the increased size of civil infrastructure and the cost of materials, the needs exists for utilizing large sized cast-inplace piles in lieu of conventional precast piles. Among them, the barrette pile has become more commonly used in fields where a diaphragm wall is the retaining wall, to improve workability and economical efficiency, and to ensure hole stability under deep soil layers. In this paper, the bearing capacity and displacement characteristics of the barrette pile are evaluated by using the bi-directional loading test data obtained from four different sites. In addition, the design value of pile shaft resistance, ${\beta}$, is assessed with previous literatures and load transfer analysis. Finally, numerical analyses were performed to analyze the load-displacement behavior, and the interface effect on the piles, using the 3-dimensional finite element method.

구조물의 대형화와 재료비의 증가로 인해 다수의 기성말뚝을 대체할 수 있는 대형 현장타설말뚝의 사용이 증가하고 있다. 특히, 지하연속벽공법이 적용된 현장의 기초시공에 따른 시공성 및 경제성을 향상시키거나 토사층이 깊게 분포한 경우 공벽의 안정성을 확보하기 위한 기초형식으로 바렛말뚝의 사용이 증가하고 있는 실정이다. 본 논문에서는 국내 4개 현장을 대상으로 바렛말뚝을 시공하고 양방향 재하시험을 실시하여 말뚝의 지지력 및 침하특성을 고찰하였다. 또한 하중전이분석을 통하여 주면마찰력의 평가를 위한 ${\beta}$값을 분석하여 비교 평가하였고 3차원 유한요소해석을 통하여 양방향재하시험에 따른 경계면 효과와 하중-침하특성을 살펴보았다.

Keywords

References

  1. 권오성, 최용규, 권오균, 김명모(2006) 양방향 말뚝재하시험을 이용한 말뚝의 하중-변위곡선 추정 방법, 한국지반공학회논문집, 한국지반공학회, 제22권, 제4호, pp. 11-19.
  2. 정창규(2004) 선단유압재하시험법의 현장적용성에 관한 연구, 박사학위논문, 경성대학교.
  3. ASTM D1143-81(Reapproved by 1994) (1994) Standard Test Method for Piles Under Static Axial Compressive Load.
  4. Fellenius, B. H., Altaee, A., Kulesza, R., and Hayes, J. (1999) O-cell testing and FE analysis of 28-m-deep barrette in Manila, Philippines. Journal of Geotechnical and Geoenvironmental Engineering, Vol. 125, No. 7, ASCE, pp. 566-575. https://doi.org/10.1061/(ASCE)1090-0241(1999)125:7(566)
  5. Ho, C.E. and Tan, C.G. (1996) Barrette foundation constructed under polymer slurry support in old alluvium. Proc. 12th Southeast Asian Geotech. Conf., Kuala Lumpur, pp. 379-384
  6. Johnson, E. G., Johnson K. E. & Erikson, C. M. (1992). Deep Foundation Elements Installed by Slurry Wall Techniques. In Slurry Walls; Design, Construction, and Quality Control. ASTM, STP, 1129, Philadelphia, pp. 207-224.
  7. Lei, G.H. and Ng, C.W.W (2007) Rectangular barrettes and circular bored piles in saprolites. Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 160, No. 4, pp. 237-247.
  8. Osterberg, J.O. (1998), The osterberg load test method for drilled shafts and driven piles-the first ten years. Proceedings 7th International Conference on Deep Foundations, Vienna, Austria., June 15-17, Deep Foundation Institute, Englewood Cliffs, N.J, 1.28.1-1.28.11.
  9. O'Neill, M.W. and Reese, L.C. (1999) Drilled Shafts : Construction Procedures and Design Methods. U.S. Department of Transportation, Federal Highway Administration, Publication No. FHWA-IF-99-025.
  10. Ramaswamy, S.D. and Pertusier, E.M. (1986) Construction of barrettes for high-rise foundation. Journal of Construction Engineering., ASCE, Vol. 112, No. 4, pp. 455-462. https://doi.org/10.1061/(ASCE)0733-9364(1986)112:4(455)
  11. Thasnanipan, N., Maung, A.W., Aye, Z.Z., and Tanseng, P. (2001) Record load test on a large barrette and its performance in the layers soils of Bangkok, 5th International Conference on Deep Foundation Practice incorporating Piletalk, 4-6 April, Singapore, pp. 363-370.