DOI QR코드

DOI QR Code

A Study on the Flexural Behavior of Concrete Filled Steel Tube Girder in Parametrically Varied Filling and Composition

충전 및 합성조건 변화에 따른 콘크리트 충전강관 거더의 휨거동에 관한 연구

  • 진원종 (한국건설기술연구원 구조교량연구실) ;
  • 강재윤 (한국건설기술연구원 구조교량연구실) ;
  • 최은석 (한국건설기술연구원 구조교량연구실) ;
  • 이정우 (한국건설기술연구원 구조교량연구실)
  • Received : 2007.12.27
  • Accepted : 2008.12.28
  • Published : 2009.03.31

Abstract

A new bridge system described in this paper uses concrete-filled steel tube (CFT) girders as a replacement for conventional girders. Experimental investigations were carried out to comprehend the flexural behavior of CFT girder. Specimens were manufactured considering several parameters such as the strength of filling material, the eventual presence and number of inner shear connectors to evaluate the bending bearing capacity of CFT girder. The experimental investigation consisted of designing and constructing a test specimen and loading it to collapse in bending to check the applicability of the system. Test results showed that concrete filled steel tube girders have good ductility and maintain their strength up to the end of the loading. The stiffening effect of the ㄱ-shaped perfobond rib is determined to contribute relatively to the increase of the bending bearing capacity.

이 연구에서는 CFT부재를 거더로 사용하는 신형식 강합성 교량 시스템 개발을 최종목표로 하고, CFT부재의 휨거동 특성을 규명하기 위한 부재실험을 수행하였다. 실험체는 충전재 강도 및 합성조건 변화 등 설계에 영향을 미치는 주요 매개변수를 고려하여 제작하였고, 휨재하 실험의 결과분석을 통해 CFT부재가 갖는 내력성능을 효율적으로 설계에 반영하기 위한 방안을 고찰하였다. 충전강관은 중공강관에 비해 휨강도 및 연성이 크게 증가함을 확인할 수 있었으며, 콘크리트의 취성적 재료 특성이 강관의 구속효과로 보완되는 결과를 확인하였다. 내부 전단연결재를 둠으로써 충전재와 강관 사이의 미끄러짐을 억제하여 완전합성단면으로 거동하였고, ㄱ형 전단연결재의 보강재 효과가 휨내력 증가에 다소 기여하고 있음을 알 수 있었다.

Keywords

References

  1. 이흥수(2006) ㄱ형 Perfobond 리브 전단연결재의 전단거동.
  2. 정철헌, 이흥수, 박종면, 김영호(2004) 합성작용을 위한 새로운 Perfobond 전단연결재, 대한토목학회 논문집, 대한토목학회, 제24권 제3A호, pp. 525-532.
  3. 한국건설기술연구원(2004) 콘크리트 충전 강관거더의 설계 및 시공에 관한 연구.
  4. 한국건설기술연구원(2006) 콘크리트 충전 강관거더를 이용한 강합성 교량구조 개발(1차년도).
  5. Nakamura, S., Hosaka, T., and Nishiumi, K. (2004) Bending behavior of steel pipe girders filled with ultralight mortar, Journal of Bridge Engineering, Vol. 9, No. 3, pp. 297-303. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:3(297)
  6. Elchalakani, M., Zhao, X.L., and Grzebieta, R.H. (2001) Concretefilled circular steel tube subjected to pure bending. Journal of Constructional Steel Research 57, pp. 1141-1168. https://doi.org/10.1016/S0143-974X(01)00035-9
  7. Hosaka, T., Nakamura, S., Umehara, R., and Nishiumi, K. (1997) Design and experiments on a new railway bridge system using concrete filled steel pipes, International Conference of IABSE in Innsbruck.
  8. Matsumura, T., Hosaka, T., Hiraoka, C., and Nichiumi. K. (2003) Practical application of composite bridge for Shinkansen using CFT, IABSE Symposium in Antwerp, Vol. 87, pp. 136-137.
  9. Nakamura, S. (2000) New Structural forms for steel/concrete composite bridges, Structural Engineering International, Journal of IABSE, Vol. 10, No. 1, pp. 45-50. https://doi.org/10.2749/101686600780620955
  10. Veldanda, M.R. and Hosain, M.U. (1992) Behavior of perfobond rib shear connectors in composite beams : push-out tests, Canadian Journal of Civil Engineering, Vol. 19, No. 1, pp. 1-10. https://doi.org/10.1139/l92-001