Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

A study on the Mathematical Tension Model for a Non-contact Transfer of a Moving Web in R2R e-Printing Systems

롤투롤 시스템에서의 비 접촉 이송 시스템을 위한 수학적 장력 모델에 관한 연구

  • Published : 2009.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In a post printing section of roll to roll printing systems, scratch problem is the major defects. The functional qualities such as conductivity, mobility could deteriorate because of the scratch defect. In general, the scratch of the printed pattern on the flexible substrate was induced from a contact between rolls and printed pattern in the post printing section. In this paper, for non-contacting transfer of a moving web, a mathematical tension model has been developed considering strain due to air floatation and the proposed mode has been validated by numerical simulation. Additionally, the correlation between floatation height and speed compensation to control the tension and register are investigated. On the basis of the proposed model, a guide line of speed control in R2R printing system is presented to guarantee the non-contact between rolls and R2R printed pattern on the flexible substrate.

Keywords

References

  1. D. R Roisum, The Mechanics of Rollers, TAPPI press, Technology Park/Atlanta, 1996
  2. Y. B. Chang and P. M. Moretti, 'Aerodynamic characteristics of pressure-pad air bars,' Journal of Applied Mechanics, vol. 67, pp. 177-182, Mar. 2000 https://doi.org/10.1115/1.321161
  3. Y. B. Chang, R. P. Swanson, and P. M. Moretti, 'Longitudinal and out-of-plane stiffuess of a web in an air-flotation oven,' Noise Control and Acoustics Division-ASME, vol. 4, pp. 435-443,1999
  4. K. H. Shin, Tension Control, TAPPI press, Technology Park/Atlanta, 2000
  5. J. N. Goodier and S. P. Timoshenko, Theory of Elasticity, 3rd Ed., McGraw-Hill, Singapore, 1970
  6. H. S. Jeong, S. H. Yoo, and K. N. Paek, 'Strip temperature control for the heating furnace in the continuous-annealing line,' Proceedings of 90' Korea Automatic Control Conference, Oct. 1999
  7. K. H. Shin and W K. Hong, 'Real-time tension control in a multi-stand rolling system,' KSME International Journal, vol. 12, no. 1, pp. 12-21, 1998
  8. S. M$\ddot{u}$ft$\ddot{u}$, T. S. Lewis, K. A. Cole, and R. C. Benson, 'Atwodimensional model of the fluid dynamics of an air reverser,' Journal of Applied Mechanics, vol. 65, pp. 171-177, Mar. 1998 https://doi.org/10.1115/1.2789021
  9. B. S. Rice and R. F. Gans, 'Predictive models of web-to-roller traction,' Journal ofTribology, vol. 127, pp. 180-189, Jan. 2005 https://doi.org/10.1115/1.1828066
  10. S. M$\ddot{u}$ft$\ddot{u}$, 'Mechanics of a thin, tensioned shell, wrapped helically around a tum-bar,' Journal of Fluids and Structures, vol. 23, no.5,pp. 767-785, Jul. 2007 https://doi.org/10.1016/j.jfluidstructs.2006.11.007

Cited by

  1. Technology of Dimensional Control for Different Thickness Strip in Hot Strip Finishing Mills vol.21, pp.8, 2015, https://doi.org/10.5302/J.ICROS.2015.15.0080