DOI QR코드

DOI QR Code

The Effect of Electrochemical Performance and Safety by Surface Modification of Anode Materials for Lithium Secondary Battery

리튬 이차 전지를 위한 음극 활물질 표면의 코팅으로 인한 전기화학적 특성 및 안전성

  • 허윤정 ((주) 코캄 전지기술연구소) ;
  • 고성태 ((주) 코캄 전지기술연구소)
  • Published : 2009.08.28

Abstract

This paper aims to report the effect of surface treatment on graphite and its effect on the improvement of $Al_2O_3$ and $nano-Li_4Ti_5O_{12}$. The structure and property of surface treatment on graphite were determined by scanning electron microscopy, transmission electron microscopy and electrochemical property and safety were determined by charge/discharge cycler, accelerating rate calorimeter. The composite with different metallic oxide exhibited the first efficiency of 82.5% and specific capacity of 350 mAh/g. Although the composite showed same efficiency and specific capacity at first cycle, surface treatment on graphite by $nano-Li_4Ti_5O_{12}$ exhibited a higher charge/discharge rate, cycle life and thermal stability.

리튬 이차 전지의 전기화학적 특성 및 안전성 향상을 위한 음극 활물질 표면 처리 재료로 $Al_2O_3$$nano-Li_4Ti_5O_{12}$등이 사용된다. 표면 처리된 음극 활물질의 형상과 특성을 관찰하기 위해 주사전자현미경(Scanning electron microscopy, SEM), 투과전자현미경(Transmission electron microscopy, TEM)으로 관찰하였으며, 전기화학적 특성 및 안전성 평가를 위해 충방전기 및 가속 율열량계(Accelerating Rate Calorimeter, ARC)를 사용하였다. 각각의 금속 산화물에 따른 초기 효율 및 초기 용량은 82.5%와 350mAh/g로 동일하지만, 충방전 율속에 따른 특성 및 수명, 그리고 열적 안전성은 $nano-Li_4Ti_5O_{12}$로 음극 활물질을 표면 처리 한 활물질이 더 우수하였다.

Keywords

References

  1. H. Azuma, H. Imoto, S. Yamada, and K. Sekai, J. PowerSources 81-82, 1 (1999) https://doi.org/10.1016/S0378-7753(99)00122-6
  2. T. Kasuh, A. Mabuchi, K. Tokumitsu, and H. Fujimoto, J. PowerSources 68, 99 (1997) https://doi.org/10.1016/S0378-7753(97)02582-2
  3. I. Mochida, C. Hunku, S. Yoon, and Y. Korai, J. PowerSources 75, 214 (1998) https://doi.org/10.1016/S0378-7753(98)00101-3
  4. S. Ma, J. Li, X. Jing, and F. Wang, SolidStateIonics 86-88, 911 (1996)
  5. Yao J, Wang GX, and Ahn J, et al, J. PowerSources, 114, 292 (2003) https://doi.org/10.1016/S0378-7753(02)00585-2
  6. Q. Wang, H. Li, L. Chen, and X. J. Huang, Solid State Ionics 152&153, 43 (2002) https://doi.org/10.1016/S0167-2738(02)00687-2
  7. G. Nadeau, W. Y. Song, and M. Masse, et al., J. Power Sources 108, 86 (2002) https://doi.org/10.1016/S0378-7753(02)00009-5
  8. S. Kim, Y. Kadoma, H. Ikuta, Y. Uchimoto, and M. Wakihara, Electrochem. SolidState Lett. A109, 4 (2001)
  9. K. Kawabata, H. Yashimatsu, E. Fujii, K. Hiragushi, A. Osaka, and Y. Miura, J. Mater. Lett., 20(9), 851 (2001) https://doi.org/10.1023/A:1010970931622
  10. S. Zhang and W. E. Lee, J. Eur. Ceram. Soc., 23(8), 1215 (2003) https://doi.org/10.1016/S0955-2219(02)00284-4
  11. J. Yu, S. Ueno, and K. Hiragushi, J.Ceram. Soc. Jpn., 104(6), 457 (1996)
  12. S. Sunwoo, J. H. Kim, K. G. Lee, and H. Kim, J. Mater. Sci., 35(14), 3677 (2000) https://doi.org/10.1023/A:1004894404376
  13. A. Saberi, F. Golestani-Fard, M. Willert-Porada, R. Simon, and T. Gerdes, H. Sarpoolaky Journal of the European Ceramic Society, 28, 2011 (2008) https://doi.org/10.1016/j.jeurceramsoc.2008.01.020
  14. K. Zaghib, M. Armand, M. Gauthier, Proceedings of the 190th Electrochemical Society Meeting, San Antonio, 1996 (Abstract No. 93)
  15. K. Zaghib, M. Armand, and M. Gauthier, J. Broadhead, B. Scrosati (Eds.), The Electrochemical Society, Pennington, NJ, 250 (1997)
  16. A. Guerfi, S. Sevigny, M. Lagace, P. Hovington, K. Kinoshita, and K. Zaghib, J. Power Sources 119-121, 88 (2003) https://doi.org/10.1016/S0378-7753(03)00131-9
  17. K. Nakahara, R. Nakajima, T. Matsushima, and H. Majima, J. Power Sources, 117, 113 (2003) https://doi.org/10.1016/S0378-7753(03)00169-1
  18. G. G. Amatucci, F. Badway, A. Du. Pasquier, and T. Zheng, J. Electrochem. Soc. A930, 148 (2001) https://doi.org/10.1149/1.1383553
  19. A. Du Pasquier, I. Plitz, S. Menocal, and G. Amatucci, J. Power Sources, 115, 171 (2003) https://doi.org/10.1016/S0378-7753(02)00718-8
  20. K. Zaghib M. Simoneau, M. Armand, and M. Gauthier, J. Power Sources, 81-82, 300 (1999) https://doi.org/10.1016/S0378-7753(99)00209-8