한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제18권5호
  • /
  • Pages.483-490
  • /
  • 2009
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

알루미늄 보온로 용탕 자동공급 시스템 개발

The Development of an Automatic Molten Metal Supplier for an Aluminum Thermal Furnace

  • 이준호 (한국폴리텍VII대학 창원캠퍼스 자동화시스템과)
  • 발행 : 2009.10.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of this development project is to localize an automatic molten metal supplier that has been distributed by WESTOMAT, Germany, throughout the world. To achieve this purpose, an energy-saving pressurized dosing furnace and molten metal differential pressure control system that Is able to automatically supply a determined quantity of aluminum molten metal were developed. The localized equipment was installed in a site. Also, the results of the test operation of this equipment can be summarized as follows: It was able to improve the productivity because there were small decreases in supplying speeds and small losses in wastes compared to the existing mechanical molten metal supplier. Also, it was able to minimize the cost in maintenances due to the direct application of high temperature molten metals to molds. In addition, there were small energy losses due to the use of high thermal insulators compared to the existing reverberating furnace and able to prolong the life-time of furnaces and produce good quality nonferrous metals because it represented small carbon refractories and alumina in applied molten metals. Furthermore, it demonstrated no particular differences by objectively comparing it with the product by WESTOMAT.

키워드

참고문헌

  1. Shinjin Furnace Co., Ltd., 2006, Development of the Technology for an Automatic Molten Metal Supply System in a N in arous Metal Thermal Furnace::::::final inport on the development of local industrial technologies in 2006, the Ministry of Commerce, Industry and Energy, Republic of Korea.
  2. Korea Polytech VII College Changwon Campus, 2006, Development of the Technology for an Automatic Molten Metal Supply System in a Nonferrous Metal Thermal Furnace: The final report on the development of local industrial technologies in 2004, the Ministry of Commerce, Industry and Energy, Republic of Korea.
  3. Lee, Y. J., 2007, "Localization Case of an Automatic Supplier of Molten Metal in NonFerrous Metal Thermal Furnaces," A treatise in the Spring Congress in 2007 by KSMTE; The Korean Society of Machine Tool Engineers, pp. 86-91.
  4. Dongsung Enertech Co., Ltd., 2005, A Study on the Development of an Automatic Quantified Molten Metal Supplier for Aluminum, The Ministry of Commerce, Industry and Energy, Republic of Korea.
  5. Westomat Dosing Furnace., n.d., viewed 7 June 2009, .
  6. Choi, J. K., Kim, D. O., and Hong, C. P., 1989, "Computer Simulation of Solidification Process in the Gravity Die Casting of Cast Iron," Conference Proceedings, Cast Iron IV, Materials Research Society, pp. 441-446.
  7. Choi, J. K., and Hong, C. P., 1990, "Computer Simulation of Solidification Process in the Gravity Die Casting of Cast Iron," The Korean Foundry men's Society, Vol. 10, No. 3, pp. 67-73.
  8. Ramati, S. D. E., Abbaschian, G. J., Backman, D. G., and Mehrabian, R., 1978, "Forging of Liquid and Partially Solid Sn-15 Pct Pb and Aluminum Alloys," American Society for Metals and The Metallurgical Society of AIME, Vol. 9B, pp. 279-286.
  9. Won, C. J., Lee, J. S., and Hong, S. J., 2001, "Structural Analysis Comparison of Continuous Casting Mold," The Korean Society of Machine Tool Engineers, Vol. 10, No. 4, pp. 104-110.
  10. Han, Y. S., Kim, D. H., and Lee, H. I., 1986, "Effects of Hydrostatic Pressure on Solidification Phenomena of Al-Si binary alloys(1)-Metallurgical Study," The Korean Foundry men's Society, Vol. 6, No. 2, pp.116-121.
  11. Wallace, J. F., and Stuhrke, W. F., 1966, "Gating of Die Casting," American Foundry Men’s Society, Vol. 44, No. 1, pp. 51-79.
  12. Berry, J. T. and Dantzig, J., 1984, "In Modeling of Casting and Welding Process," The Metallurgical Society of AIME, pp. 221-236.
  13. Nishida, Y., Droste, W., and Engler, S., 1986, "The Air Gap Formation at the Casting-Mold Interface and the Heat Transfer Mechanism Through in Gap," Metallurgical Transactions B, Vol. 17B, pp. 833-844.
  14. Caswell, B. F., and Lorentzen, P., 1968, "Some Theoretical Aspects of Heat Transfer in the Die Casting Process," Die Casting Engineer, pp. 26-32.
  15. Chen, S. C., Peng, H. S., Chang, J. A and Jong, W. R., 2005, "Rapid Mold Surface Heating/Cooling Using Electromagnetic Induction Technology," Proceeding of the 2005 IEEE International Conference on Mechatronics, pp. 771-776.
  16. Alexander, B., Yuji, T., and Masato, E., 2005, "Designing of Suitable Construction of High-Frequency Induction Heating Coil by Using Finite-Element Method," IEEE Transaction on Magnetics, Vol. 41, No. 10. pp. 4048-4050.
  17. Pieter, D., Jacobus D, V. W., and Oskar H, S., 2000, "On the Influence of Coil Design and Efficiency of an Induction Melting Furnace," IEEE Transaction on Industry Application, Vol. 36, No. 4. pp. 946-957.