설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제21권10호
  • /
  • Pages.575-582
  • /
  • 2009
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지

이론적 방법에 의한 제습로터 최적 회전속도의 결정

Theoretical Derivation of the Optimum Rotation Speed of a Desiccant Rotor

  • 이대영 (한국과학기술연구원 에너지 메카닉스 연구센터) ;
  • 송귀은 (한국과학기술연구원 에너지 메카닉스 연구센터)
  • 발행 : 2009.10.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The optimum rotation speed of a desiccant rotor is studied theoretically based on a theoretical solution to the heat and mass transfer processes in the desiccant rotor. A simple correlation equation for the optimum rotation speed is derived to show the effects of various parameters including the thermo-physical properties, the geometric dimension, and the operating condition of the desiccant rotor. The theoretical result is compared with existing experimental data to validate the linearization and simplification included in the solution procedure. Based on the theoretical solution, the effects of major parameters on the optimum rotation speed are studied and the fundamental mechanism of the influences is investigated.

키워드

참고문헌

  1. Lee, G., Kim M. S. and Lee, D.-Y., 2005, Derivation and analysis of dimensionless parameters dominating the dehumidification characteristics of a desiccant rotor, Korea Journal of Air-Conditioning and Refrigeration Engineering, Vol. 17, No. 7, pp. 611-619
  2. Zheng, W. and Worek, W. M., 1993, Numerical simulation of combined heat and mass transfer process in a rotary dehumidifier, Numerical Heat Transfer, Part A, Vol. 23, pp. 211-232 https://doi.org/10.1080/10407789308913669
  3. Zheng, W., Worek, W. M. and Novosel, D., 1993, Control and optimization of rotational speeds for rotary dehumidifiers, ASHRAE Transactions： Symposia, pp. 825-833
  4. Zheng, W., Worek, W. M. and Novosel, D., 1995, Performance optimization of rotary dehumidifiers, Journal of Solar Energy Engineering, Vol. 117, pp. 40-44 https://doi.org/10.1115/1.2847724
  5. Kodama, A., Hirayama, T., Motonobu, G., Tsutomu, H. and Critoph, R. E., 2001, The use of psychrometric charts for the optimisation of a thermal swing desiccant wheel, Applied Thermal Engineering, Vol. 21, pp. 1657-1674 https://doi.org/10.1016/S1359-4311(01)00032-1
  6. Dai, Y. J., Wang, R. Z. and Zhang, H. F., 2001, Parameter analysis to improve rotary desiccant dehumidification using a mathematical model, International Journal of Therm, Sci., Vol. 40, pp. 400-408 https://doi.org/10.1016/S1290-0729(01)01224-8
  7. Chung, J. D., Yoon, S. M., and Lee, D.-Y., 2007, Optimization of the area ratio of regeneration to dehumidification and rotor speed on the condition of low regeneration temperature, Korean Journal of Air- Conditioning and Refrigeration Engineering, Vol. 19, No. 7, pp. 521-528
  8. Chung, J. D., Lee, D.-Y., and Yoon, S. M., 2007, Effect of desiccant and channel geometrics on the performance of desiccant rotor, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 19, No. 8, pp. 569-576
  9. Lee, G., Lee, D.-Y., and Kim, M. S., 2004, Development of a linearized model and verification of the exact solution for the analysis of a desiccant dehumidifier, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 16, No. 9, pp. 811-819
  10. Pesaran, A. A. and Mills, A. F., 1987, Moisture transport in Silica-Gel packed beds-II. Experimental study, Int. J. Heat Mass Transfer, Vol. 30, pp. 1051-1060 https://doi.org/10.1016/0017-9310(87)90035-4