Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

The Joining Characteristics of Butt Friction Stir Welded C1020/Al6063

C1020/Al6063 이종 합금의 맞대기 마찰교반접합의 접합특성

  • Published : 2009.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

The Friction Stir Welding (FSW) has mainly been used for making butt joints in Al alloys. Development of FSW would expand the number of applications. The FSW is a relatively solid-state joining process. This study possibility of a welding between C1020 and Al6063 by means of FSW has fundamentally clarified. The primary process parameters, such as a rotating speed, rotating direction of tool and off-set of pin periphery from materials interface were optimize, respectively.

Keywords

References

  1. 장웅성, 대한용접학회, 18-6 (2000) 704
  2. T. Shinoda, J. Jpn. weld. Soc., 67 (1998) 326 https://doi.org/10.2207/qjjws1943.67.326
  3. C. J. Dawes, Proceedings of 6th Int'l Symp. Jpn. Weld. Soc., (1996) 60
  4. F. R. Collins, Welding J., 37 (1964) 443
  5. D. Lohwasser, Second International Symposium on FSW, Gothenburg, Sweden (2000)
  6. G. Liu, L. E. Murr, Scripta Mater., 37, (1997) 355 https://doi.org/10.1016/S1359-6462(97)00093-6
  7. O. T. Midling, First International Symposium on FSW, Thousand Oaks. USA, (1999)
  8. J.-C. Park, 한국표면공학회지 42(1) (2009) 13 https://doi.org/10.5695/JKISE.2009.42.1.013
  9. Radovan Kovacevic, JMEPEG 16 (2007) 477 https://doi.org/10.1007/s11665-007-9081-8
  10. William J. Arbegast, Scripta Materialia, 58 (2008) 372 https://doi.org/10.1016/j.scriptamat.2007.10.031
  11. J. H. Hattel, Acta Materialia, 54(4) (2006) 1199 https://doi.org/10.1016/j.actamat.2005.10.052

Cited by

  1. FSW Properties of Aluminum alloy 5000/6000 for Small Boat vol.32, pp.1, 2014, https://doi.org/10.5781/JWJ.2014.32.1.34
  2. Investigation of Microstructure and Mechanical Properties of Friction Stir Lap-Jointed A6061/HT590 Alloys vol.57, pp.5, 2016, https://doi.org/10.2320/matertrans.M2015413