Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Study on Concept Design of the Motor Actuator of Outside Rear-View Mirror by Incomplete Coupled Design

불완전연성설계의 특성을 갖는 사이드미러 액추에이터의 개념설계에 관한 연구

  • Choi, Jun-Ho (Graduate School of Automotive Engineering, Kookmin Univ.) ;
  • Lee, Kun-Sang (School of Mechanical Engineering, Kookmin Univ.)
  • 최준호 (국민대학교 자동차공학전문대학원) ;
  • 이건상 (국민대학교 기계시스템공학부)
  • Received : 2010.05.14
  • Accepted : 2010.09.16
  • Published : 2010.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents an analysis of the design hypothesis of integration of parts from the viewpoint of axiomatic design. In parts integration, parts with the same functions are integrated into a single part. For the analysis, a motor actuator of an outside rear-view mirror with the type of an uncoupled design was used. The parts within the actuator are checked for determining the possibility of integration, by adopting the design hypothesis of integration of parts. The design hypothesis of integration of parts is based on a type of coupled design. However, the type of incomplete coupled design that resembles the type of an uncoupled design would be better than the type of a coupled design.

본 논문에서는 같은 기능을 하는 부품들을 통합된 부품으로 설계하기 위한 부품통합 설계가설을 정립하기 위해 이 가설을 공리적 설계의 관점에서 분석하였다. 이 연구를 위해 비연성설계의 특성을 갖고 있는 전동식 사이드미러 액추에이터를 분석 대상으로 삼았다. 부품통합 설계가설을 이용하여 액추에이터를 구성하는 부품들의 통합 가능성을 검토하였다. 부품통합 설계가설에 의해서 도출된 개념설계는 연성설계의 특성을 갖는다. 그런데 이러한 개념설계 중에서 불완전연성설계의 특성을 가지며, 비연성설계의 특성에 접근하는 설계일수록 더 나은 설계가 됨을 확인할 수 있다.

Keywords

References

  1. Choi, J. H. and Lee, K. S., 2008, "A Study on the Design Hypothesis of Integrated Part for Product Improvement,” KSME 2008 Fall Annual Meeting, pp1176-1180.
  2. Wood, K. L., Stone, R. B., and Crawford, R. H., 2000, "A Heuristic Method for Identifying Modules for Product Architectures,” Design Studies, Vol. 21 No. 1, pp.6-9.
  3. Choi, J. H. and Lee, K. S., 2009, "A Study on the Coupled Design of Concept Design by the Design Hypothesis of Integrated Part,” KSME 2009 Fall Annual Meeting, pp1231-1236.
  4. Suh, N. P., 2002, Axiomatic Design, Dongmyungsa, Paju-si Gyeonggi-do Korea, pp. 69-79.
  5. Suh, N. P., 2002, Axiomatic Design, Dongmyungsa, Paju-si Gyeonggi-do Korea, pp. 60-69.
  6. Choi, J. H. and Lee, K. S., 2009, "Development of the Outside Rear View Mirror Motor Actuator by Design Hypothesis of Integrated Part and TRIZ,” KSAE 2009 Annual Conference and Exhibition, pp. 2738-2742.
  7. Suh, N. P., 2002, Axiomatic Design, Dongmyungsa, Paju-si Gyeonggi-do Korea, pp. 121-150.

Cited by

  1. Study of Parts Integration in Product Including Parts having Same Function vol.37, pp.2, 2013, https://doi.org/10.3795/KSME-A.2013.37.2.193