수산해양기술연구 (Journal of the Korean Society of Fisheries and Ocean Technology)

  • 제46권1호
  • /
  • Pages.20-31
  • /
  • 2010
  • /
  • 2671-9940(pISSN)
  • /
  • 2671-9924(eISSN)
한국수산해양기술학회 (The Korean Society of Fisheries and Ocean Technology)
권호 표지
DOI QR코드

DOI QR Code

상하가 원형 파이프로 구성된 부침식 가두리의 동적 거동 해석

Dynamic behavior of a submersible fish cage rigged with a circular floating and a sinking collar

  • 이춘우 (부경대학교 해양생산시스템관리학부) ;
  • 이지훈 (부경대학교 저탄소해양생산기술연구소) ;
  • 최무열 (부경대학교 수산물리학과) ;
  • 이건호 (국립수산과학원 수산공학과)
  • Lee, Chun-Woo (Division of Marine Production System Management, Pukyong National University) ;
  • Lee, Ji-Hoon (Institute of Low-Carbon Marine Production Technology, Pukyong National University) ;
  • Choe, Moo-Youl (Department of Fisheries Physics, Pukyong National University) ;
  • Lee, Gun-Ho (Fisheries Engineering Division, National Fisheries Research and Development Institute)
  • 발행 : 2010.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this research, the submersible fish cage was designed to avoid structural and biological damage during harsh sea conditions. The submersible cage system consists of netting, mooring ropes, a floating collar, floats, sinkers and anchors. Whole elements of the cage were modeled on the mass-spring model. The computer simulations were carried out to investigate the dynamic behavior of the cage and to calculate mooring line tension subjected to tidal currents and waves. As expected, the tension values in the mooring line of the submerged position are 36% less compared to that of the surface cage under the same loading conditions. As the wave was used in combination with the current velocity of 1m/s, the average tensile load for the submerged cage showed 85% of the value for the floating cage. The simulation results provide an improved understanding of the behaviors of the structure and valuable information on the optimized design of the cage system exposed to open ocean environmental factors.

키워드

참고문헌

  1. DeCew, J., D.W. Fredriksson, L. Bugrov, M.R. Swift, O. Eroshkin and B. Celikkol, 2005. A case study of a modified gravity type cage and mooring systemusing numerical and physical models. IEEE Jouranl of Oceanic Engineering, 30 (1), 47-58. https://doi.org/10.1109/JOE.2004.841400
  2. Fredriksson, D.W., M.R. Swift, J.D. Irish, I. Tsukrov and B. Celikkol, 2003. Fish cage and mooring system dynamics using physical and numerical models withfield measurements. Aquacultural Engineering, 27, 117-146. https://doi.org/10.1016/S0144-8609(02)00043-2
  3. Fredriksson, D.W., J.C. DeCew and I. Tsukrov, 2007. Development of structural modeling techniques for evaluating HDPE plastic net pens used in marine aquaculture. Ocean Engineering, 34, 2124-2137. https://doi.org/10.1016/j.oceaneng.2007.04.007
  4. Huang, C.C., H.J. Tang and J.Y. Liu, 2006. Dynamical analysis of net cage structures for marine aquaculture: Numerical simulation and model testing. Aquacultural Engineering, 35, 258-270. https://doi.org/10.1016/j.aquaeng.2006.03.003
  5. Huang, C.C., H.J. Tang and J.Y. Liu, 2007. Modeling volume deformation in gravity-type cages with distributed bottom weights or a rigid tube sinker. Aquacultural Engineering, 37, 144-157. https://doi.org/10.1016/j.aquaeng.2007.04.003
  6. Huang, C.C., H.J. Tang and J.Y. Liu, 2008. Effects of waves and currents on gravity type cages in the open sea. Aquacultural Engineering, 38, 105-116 https://doi.org/10.1016/j.aquaeng.2008.01.003
  7. Kim, H.Y., C.W. Lee, J.K. Shin, H.S. Kim, B.J. Cha and G.H. Lee, 2007. Dynamic simulation of the behavior of purse seine gear and sea-trial verification. Fisheries Research, 88, 109-119. https://doi.org/10.1016/j.fishres.2007.08.007
  8. Kim, T.H., C.R. Ryu and D.A. Kim, 2002. Analaysis on deformation and stiffness of frame structure for fishery using finite element methods. Bull. Korean Soc. Fish. Tech., 38 (4), 307-316. https://doi.org/10.3796/KSFT.2002.38.4.307
  9. Kim, T.H. and K.U. Yang, 2007. Numerical analysis on the submerging characteristics of submersible fish cage system operated by compressed air. J. Kor. Soc. Fish. Tech., 43 (1), 38-48. https://doi.org/10.3796/KSFT.2007.43.1.038
  10. Kim, T.H., 2009. Design of fish cage structures. Chonnam Univ. Press, Korea, pp. 40-183.
  11. Lader, P.F. and A. Fredheim, 2006. Dynamic properties of a flexible net sheet in waves and current-a numerical approach. Aquacultural Engineering, 35, 228-238. https://doi.org/10.1016/j.aquaeng.2006.02.002
  12. Lee, C.W. and B.J. Cha, 2002. Dynamic simulation of a midwater trawl system s behavior. Fisheries Science 68, 1865-1868.
  13. Lee, C.W., J.H. Lee, B.J. Cha, H.Y. Kim and J.H. Lee, 2005. Physical modeling for underwater flexible systems dynamic simulation. Ocean Engineering,32, 331-347. https://doi.org/10.1016/j.oceaneng.2004.08.007
  14. Lee, C.W., Y.B. Kim, G.H. Lee, M.Y. Choe, M.K. Lee and K.Y. Koo, 2008. Dynamic simulation of a fish cage system subjected to currents and waves. Ocean Engineering, 35, 1521-1532. https://doi.org/10.1016/j.oceaneng.2008.06.009
  15. Li, Y.C., Y.P. Zhao, F.K. Gui and B. Teng, 2006. Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current. Ocean Engineering, 33, 2352-2368. https://doi.org/10.1016/j.oceaneng.2005.11.013
  16. Thomassen, P., 2008. Methods for dynamic response analysis and fatigue life estimation of floating fish cages. Ph. D thesis. Institute of Marine Technology NTNU, Trondheim, Norway. pp. 218.
  17. Tsukrov, I., O. Eroshkin, D.W. Fredriksson, M.R. Swift and B. Celikkol, 2003. Finite element modeling of net panels using a consistent net element. OceanEngineering, 30, 251-270. https://doi.org/10.1016/S0029-8018(02)00021-5
  18. Tsukrov, I., O. Eroshkin, W. Paul and B. Celikkol, 2005. Numerical modeling of nonlinear elastic components of mooring system. IEEE Journal of Oceanic Eng., 30(1), 37-46. https://doi.org/10.1109/JOE.2004.841396
  19. Zhao, Y.P., Y.C. Li, G.H. Dong, F.K. Gui and B. Teng, 2007. Numerical simulation of the effects of structure size ratio and mesh type on threedimensional deformation of the fishing-net gravity cage in current. Aquacultural Engineering, 36, 285-301. https://doi.org/10.1016/j.aquaeng.2007.01.003

피인용 문헌

  1. Analysis on underwater stability of the octagonal pillar type fish cage and mooring system vol.50, pp.2, 2014, https://doi.org/10.3796/KSFT.2014.50.2.193