Characteristic Evaluation of Aluminium Filler Tube of Automotive

자동차 알루미늄 필라튜브의 특성평가

  • Kim, Hae-Ji ;
  • Lee, Un-Ryeong
  • 김해지 (진주산업대학교 자동차공학과) ;
  • 이운령 (다우정밀공업)
  • Received : 2010.07.30
  • Accepted : 2010.10.07
  • Published : 2010.10.30

Abstract

The characteristic evaluation of an aluminium filler tube for automotive is presented in this paper. The material of filler tube was used AL3003 aluminium. In characteristic evaluation of an aluminium filler, we measured the corrosion, chemical resistance, weight, leak, welding strength, exciting endurance, and the solt spray test etc.. It has been shown that the weight decreased approximately 61% in aluminum filler tube developed comparing with steel filler tube. As the characteristic evaluation on the manufactured aluminium filler it was enough satisfied to use at the automotive filler tube.

Acknowledgement

Supported by : 진주산업대학교

References

  1. 임석원 "자동차 경량화를 위한 신기술" 열처리공학회지, pp. 164-170, 2008.
  2. "On Materials for Lean Weight Vehicles" Automotive Engineering, 23(3), 1998.
  3. 정영훈 " 자동차용 알루미늄 합금 소재", 자동차공학회지, Vol 18, 1996.