한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제19권5호
  • /
  • Pages.603-608
  • /
  • 2010
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

계면수 변화에 따른 CFRP/Foam 원형부재의 에너지 흡수특성

Energy Absorption Characteristics of CFRP/Foam Circular Members according to Interface Number

  • 최주호 (조선대학교 첨단부품소재공학과) ;
  • 이길성 ((주)데크 기술연구소) ;
  • 양인영 (조선대학교 기계설계공학과)
  • 투고 : 2010.04.13
  • 심사 : 2010.08.18
  • 발행 : 2010.10.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, one type of circular shaped composite tube was used, combined with reinforcing foam and without foam. Furthermore, CFRP(Carbon Fiber Reinforced Plastic) circular member manufactured from CFRP prepreg sheet for lightweight design. CFRP is an anisotropic material which is the most widely adapted lightweight structural member. The crashworthy behavior of circular composite material tubes subjected to static axial compression under same conditions is reported in this paper. Test was executed in order to compare the results to the energy absorption and collapse shape. The collapse mode during the failure process were observed and analyzed. The behavior of polymeric foams to the tubes crashworthiness were also investigated. According to the experimental results, specimens filled with foam are higher total energy absorption than the other specimens not filled with the foam.

키워드

참고문헌

  1. Abramowicz, W., 1981, "Simplified Crushing Analysis of Thin-walled Column and Beams," Engineering Transactions, Vol. 29, No. 1, pp. 5-26.
  2. Wierzbicki, T. and Abramowicz, W., 1983, "On the Crushing Mechanics of Thin-walled Structures," Journal of Applied Mechanics, Vol. 50, pp. 727-733. https://doi.org/10.1115/1.3167137
  3. John, F., 1996, Handbook of Vehicle design analysis, Society of Automotive Engineers, Inc., New York, pp. 9-12.
  4. Donald, F. A., 1990, "Test Methods For Composite Materials: Seminar Notes," Technomic Publishing Company, New York.
  5. Farley, G. L. and Jones, R. M., 1991, "Prediction of Energy-Absorption Capability of Composite tubes," Journal of Composite Materials, Vol. 26, pp. 388-404.
  6. Farley, G. L., 1992, "Relationship between mechanical-property and energy-absorption trends for composite tubes," NASA Technical Paper, OMB 0704-0188.
  7. Lee, K. S., Cha, C. S., and Yang, I. Y., 2005, "A Study on the Axial Crushing Behavior of Aluminum CFRP circle Members for Light Weight," Transaction of KSAE, Vol. 13, No. 5, pp. 5-56.
  8. Yang, I. Y., Lee, K. S., Kim, Y. N., Chung, J. O., and Cha, C. S., 2006, "Axial Crushing Behavior and Energy Absorption Capability of Al/CFR Square tubes for Light Weight," Key Engineering Materials, Vol. 306-308, pp. 297-302. https://doi.org/10.4028/www.scientific.net/KEM.306-308.297
  9. Mamalis, A. G., Manolakos, D. E., Ioannidis, M. B, Chronopoulos, and D. G., Kostazos, P.K. 2009, "On the crashiworthiness of composite rectangular thin-walled tubes internally reinforced with aluminum or polymeric foams: Experimental and numerical simulation," Composite Structure, Vol. 89, Issue 3, pp. 41-23. https://doi.org/10.1016/j.compstruct.2008.09.008
  10. Wang, Q., Fan, Z., and Gui, L., 2007, "Theoretical analysis for axial crushing behavior of aluminum foam-filled hat section," Int. J. Mech. Sci., Vol. 49, pp. 515-521. https://doi.org/10.1016/j.ijmecsci.2006.06.011
  11. Yang, Y. J., Yang, I. Y., and Sim, J. K., 2009, "Collapse Characteristics of CFRP Hat Shaped Members under the Hygrothermal Environment According to Stacking Angle," Journal of KSMTE, Vol. 18, No. 5, pp. 507-513.
  12. Yang, Y. J., Cha, C. S., and Yang, I. Y., 2009, "Collapse Characteristics of CFRP Hat Shaped members According to Variation of Interface Numbers under the Hygrothermal Environment," Journal of KSMTE, Vol. 18, No. 3, pp. 241-247.