한국재료학회지 (Korean Journal of Materials Research)

  • 제20권3호
  • /
  • Pages.142-147
  • /
  • 2010
  • /
  • 1225-0562(pISSN)
  • /
  • 2287-7258(eISSN)
한국재료학회 (Materials Research Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

수크로스 함유 분무용액으로부터 분무열분해 공정에 의한 미세 Ba-Nd-Ti-O 분말 합성

Synthesis of Fine Ba-Nd-Ti-O Powders by Spray Pyrolysis from Spray Solution with Sucrose

  • Ko, You-Na (Department of Chemical Engineering, Konkuk University) ;
  • Jung, Dae-Soo (Department of Chemical Engineering, Konkuk University) ;
  • Koo, Hye-Young (Department of Chemical Engineering, Konkuk University) ;
  • Kang, Yun-Chan (Department of Chemical Engineering, Konkuk University)
  • 발행 : 2010.03.27
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Nano-sized $BaNd_2Ti_5O_{14}$ powders were prepared by the spray pyrolysis process. Sucrose used as the organic additive enabled the formation of nano-sized $BaNd_2Ti_5O_{14}$ powders. The powders prepared from the spray solution without sucrose had a spherical shape, dense structure and micron size before and after calcination. However, the precursor powders prepared from the spray solution with sucrose had a large size, and hollow and porous morphology. The precursor powders had an amorphous crystal structure because of the short residence time of the powders inside the hot wall reactor. The complete decomposition of sucrose did not occur inside the hot wall reactor. Therefore, the precursor powders obtained from the spray solution with sucrose of 0.5M had a carbon content of 39.2wt.%. The powders obtained from the spray solution with sucrose of 0.5M had a slightly aggregated structure of nano-sized primary powders of $BaNd_2Ti_5O_{14}$ crystalline phase after calcination at $1000^{\circ}C$. The calcined powders turned into nano-sized $BaNd_2Ti_5O_{14}$ powders after milling. The mean size of the $BaNd_2Ti_5O_{14}$ powders was 125 nm.

키워드

참고문헌

  1. A. Ioachim, M. I. Toacsan, M. G. Banciu, L. Nedelcu, H. Alexandru, C. Berbecaru, D. Ghetu and G. Stoica, Mater. Sci. Eng. B, 109, 183 (2004). https://doi.org/10.1016/j.mseb.2003.10.116
  2. R. Ratheesh, H. Sreemoolanadhan, M. T. Sebastian and P. Mohanan, Ferroelect., 211, 1 (1998). https://doi.org/10.1080/00150199808232329
  3. C. H. Lu and Y. H. Huang, Mater. Sci. Eng. B, 98, 33 (2003). https://doi.org/10.1016/S0921-5107(02)00593-7
  4. Y. P. Fu, C. W. Liu, C. H. Lin and C. K. Hsieh, Cetram. Int., 31, 667 (2005). https://doi.org/10.1016/j.ceramint.2004.08.005
  5. B. H. Jung, S. J. Hwang and H. S. Kim, J. Eur. Ceram. Soc., 25, 3187 (2005). https://doi.org/10.1016/j.jeurceramsoc.2004.07.002
  6. D. E. Kim, S. M. Lee, H. T. Kim and H. S. Kim, J. Kor. Ceram. Soc., 44, 110 (2007). https://doi.org/10.4191/KCERS.2007.44.2.110
  7. H. Zheng, I. M. Reaney, D. Muir, T. Price and D. M. Iddles, J. Eur. Ceram. Soc., 27, 4479 (2007). https://doi.org/10.1016/j.jeurceramsoc.2007.03.036
  8. O. Dernovsek, A. Naeini, G. Preu, W. Wersing, M. Eberstein and W. A. Schiller, J. Eur. Ceram. Soc., 21, 1693 (2001). https://doi.org/10.1016/S0955-2219(01)00096-6
  9. I. S. Cho, D. W. Kim, J. R. Kim and K. S. Hong, Ceram. Int., 30, 1181 (2004). https://doi.org/10.1016/j.ceramint.2003.12.035
  10. Y. Xu, X. M. Chen and Y. J. Wu, J. Am. Ceram. Soc., 83, 2893 (2000).
  11. S. W. Kwon and D. H. Yoon, J. Eur. Ceram. Soc., 27, 247 (2007). https://doi.org/10.1016/j.jeurceramsoc.2006.02.031
  12. V. Vinothini, V. P. Singh and M. Balasubramanian, Ceram. Int., 32, 99 (2006). https://doi.org/10.1016/j.ceramint.2004.12.012
  13. L. Guo, H. Luo, J. Gao, L. Guo and J. Yang, Mater. Lett., 60, 3011 (2006). https://doi.org/10.1016/j.matlet.2006.02.035
  14. H. Xu and L. Gao, Mater. Lett., 58, 1582 (2004). https://doi.org/10.1016/j.matlet.2003.10.030
  15. Z. Peng and Y. Chen, Microelectron. Eng., 66, 102 (2003). https://doi.org/10.1016/S0167-9317(03)00032-7
  16. K. K. Lee, Y. C. Kang, K. Y. Jung and J. H. Kim, J. Alloys Compd., 395, 280 (2005). https://doi.org/10.1016/j.jallcom.2004.11.033
  17. Y. Itoh, I. W. Lenggoro, S. E. Pratsinis and K. Okuyama, J. Mater. Res., 17, 3222 (2002). https://doi.org/10.1557/JMR.2002.0466
  18. Y. N. Ko, D. S. Jung, J. M. Han, H. Y. Koo, M. J. Lee and Y. C. Kang, Ceram. Int., 36, 63 (2010). https://doi.org/10.1016/j.ceramint.2009.06.022
  19. D. Y. Kim, S. H. Ju, H. Y. Koo, S. K. Hong and Y. C. Kang, J. Alloys Compd., 417, 254 (2006). https://doi.org/10.1016/j.jallcom.2005.09.013