DOI QR코드

DOI QR Code

Preparation of Ce0.8Gd0.2O1.9 Powder by Milling of CeO2 Slurry and Oxalate Precipitation

CeO2 슬러리 분쇄와 옥살산 침전을 이용한 Ce0.8Gd0.2O1.9 분말의 합성

  • Sim, Soo-Man (School of Materials Science and Engineering, Hongik University)
  • 심수만 (홍익대학교 재료공학부)
  • Published : 2010.03.31

Abstract

$Ce_{0.8}Gd_{0.2}O_{1.9}$(GDC20) powder was synthesized by milling of $CeO_2$ slurry and Gd oxalate precipitation. The mixture of $CeO_2$ powder and Gd precipitates calcined at $600^{\circ}C$ for 2 h showed the particle size distribution similar to that of $CeO_2$ powder, which had been milled during the synthesis process. Attrition milling of the calcined powder with an average particle size of $0.36\;{\mu}m$ for 2 h resulted in a decrease in the particle size to $0.24\;{\mu}m$. Although the milled powder consisted of small particles(<$1\;{\mu}m$), a small amount of fine platy $Gd_2O_3$ particles, which had been survived in the milling process, was observed. Sintering of the powder compacts for 4 h showed relative densities of 80.7% at $1300^{\circ}C$ and 97% at $1400^{\circ}C$, respectively. Densification was found to almost complete at $1500^{\circ}C$, resulting in a dense and homogeneous microstructure with a relative density of 99.5%.

Keywords

References

  1. H. Inaba and H. Tagawa, "Review Ceria-Based Solid Electrolytes,” Solid Sate Ionics, 83 1-16 (1996). https://doi.org/10.1016/0167-2738(95)00229-4
  2. V. V. Kharton, F. M. Figueiredo, L. Navarro, E. N. Naumovich, A. V. Kovalevsky, A. A. Yaremchenko, A. P. Viskup, A. Carneiro, F. M. B. Marques, and J. R. Frade, “Ceria-Based Materials For Solid Oxide Fuel Cells,” J. Mater. Sci., 36 1105-17 (2001). https://doi.org/10.1023/A:1004817506146
  3. J. Ma, T. S. Zhang, L. B. Kong, P. Hing, and S. H. Chan, “$Ce_{0.8}Gd_{0.2}O_{2-\delta}$ Ceramics Derived From Commercial Submicron-Sized $CeO_2$ and Gd_2O_3$ Powders for Use as Electrolytes in Solid Oxide Fuel Cells,” J. Power Sources, 132 71-6 (2004). https://doi.org/10.1016/j.jpowsour.2003.12.029
  4. J.-G. Li, T. Ikegami, Y. Wang, and T. Mori, “$10-mol%-Gd_2O_3-Doped CeO_2$ Solid Solutions via Carbonate Coprecipitation: A Compartive Study,” J. Am. Ceram. Soc., 86 [6] 915-21 (2003). https://doi.org/10.1111/j.1151-2916.2003.tb03397.x
  5. A. I. Y. Tok, L. H. Luo, and F. Y. C. Boey, “Carbonate Coprecipitation of $Gd_2O_3-Doped CeO_2$ Solid Solution Nano-Particles,” Mat. Sci. & Eng., A383 229-34 (2004).
  6. J. V. Herle, T. Horita, T. Kawada, N. Sakai, H. Yokokawa, and M. Dokiya, “Oxalate Coprecipitation of Doped Ceria Powder for Tape Casting,” Ceram. International, 24 229-41 (1998). https://doi.org/10.1016/S0272-8842(97)00007-2
  7. R. S. Torrens, N. M. Sammes, and G. A. Tomsett, “Characterisation of $(CeO_2)_{0.8}(GdO_{1.5})_{0.2}$ Synthesised Using Various Techniques,” Solid State Ionics, 111 9-15 (1998). https://doi.org/10.1016/S0167-2738(98)00172-6
  8. K. Higashi, K. Sonoda, H. Ono, S. Sameshima, and Y. Horata, “Synthesis and Sintering of Rare-Earth-Doped Ceria Powder by Oxalate Coprecipitation Method,” J. Mater. Res., 14 [3] 957-67 (1999). https://doi.org/10.1557/JMR.1999.0127
  9. T. S. Zhang, J. Ma, L. B. Kong, P. Hing, Y. J. Leng, S. H. Chan, and J. A. Kilner, “Sinterability and Ionic Conductivity of Coprecipitated Ce_{0.8}Gd_{0.2}O_{2-\delta}$ Powders Treated via a High-Energy Ball-Milling Process,” J. Power Sources, 124 26-33 (2003). https://doi.org/10.1016/S0378-7753(03)00625-6
  10. I.-N. Dong, K.-Y. Lim, and S.-M. Sim, “Preparation and Sintering Characteristics of Gd-Doped $CeO_2$ Powder by Oxalate Co-Precipitation(in Korean),” J. Kor. Ceram. Soc., 43 [10] 666-72 (2006). https://doi.org/10.4191/KCERS.2006.43.10.666
  11. R. A. Rocha and E. N. S. Muccillo, “Physical and Chemical Properties of Nanosized Gadolina-Doped Ceria Prepared by the Cation Complexation Technique,” Mater. Res. Bull., 38 1979-86 (2003). https://doi.org/10.1016/j.materresbull.2003.09.025
  12. R. O. Fuentes and R. T. Baker, “Structural, Morphological and Electrical Properties of $Gd_{0.1}Ce_{0.9}O_{1.95}$ Prepared by a Citrate Complexation Method,” J. Power Sources, 186 268-77 (2009). https://doi.org/10.1016/j.jpowsour.2008.09.119
  13. X. Guan, H. Zhou, Y. Wang, and J. Zhang, “Preparation and Properties of $Gd^{3+}$ and Y^{3+}$ Co-Doped Ceria-Based Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells,” J. Alloys and Compounds, 464 310-16 (2008). https://doi.org/10.1016/j.jallcom.2007.09.116
  14. L. D. Jadhav, M. G. Chourashiya, K. M. Subhedar, A. K. Tyagi, and J. Y. Patil, “Synthesis of Nanocrystalline Gd Doped Ceria by Combustion Technique,” J. Alloys and Compounds, 470 383-86 (2009). https://doi.org/10.1016/j.jallcom.2008.02.077
  15. Maca, J. Cihlar, K. Castkova, O. Zmeskal, and H. Hadraba, “Sintering of Gadolinia-Doped Ceria Prepared by Mechanochemical Synthesis,” J. Euro. Ceram. Soc., 27 4345-48 (2007). https://doi.org/10.1016/j.jeurceramsoc.2007.02.157