Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

The Design Optimization of LCD Panel Bonding Equipment by Design of Experiment

실험계획법을 이용한 LCD 압착장비의 설계최적화

  • Received : 2010.07.01
  • Accepted : 2010.09.24
  • Published : 2010.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The design of press bonding tool in LCD module equipment is a very complex and difficult task because many design able variables are involved while their effects are not known. It takes longtime experiments and much expenses to verify the effects of these design variables. However the optimization of bonding tool using OLB(outer lead bonding) and PCB Bonding is a very important problem in LCD manufacturing process, so much design efforts have been made for improving the bonding tool performance. In this paper, a reasonable and fast process which gives optimized solution under the design requirements has been presented. Both analytical and statistical methods are employed in this process. A reliable analytic model using experiment-oriented FE analysis can be obtained, in which the regression equations that predict the tool efficiency from various DOE method are found. Improvement of tool efficiency could be estimated by the regression equations using meaningful factors converged by RSM(Response Surface Method). With this process a reasonable optimized solution that meets a variety of design requirements can be easily obtained.

Keywords

References

  1. Um, Y. Y., Lee, B. Y. and Park, S. H., "Analysis on the Fracture of a Panel Glass in a Liquid Crystal Display Module under Mechanical Shock," J. of the Korean Society for Precision Engineering, Vol. 17, No. 12, pp. 76-81, 2000.
  2. Ko, K. W. and Kim, J. H., "Research on Defect Inspection of LCD Panel," J. of the Korean Society for Precision Engineering, Vol. 24, No. 4, pp. 7-14, 2007.
  3. Huh, J. S., Jung, B. C., Lee, T. Y. and Kwak, B. M., "A Study on the Robust Optimal Supporting Positions of TFT-LCD Glass Panel," Trans. of the KSME(A), Vol. 30, No. 8, pp. 1001-1007, 2006.
  4. Jang, K. W. and Park, K. W., "Effect of Heating Rate During ACFs Curing Process on Material Property and Thermal Cycling Reliability of Flip Chip Assembly," The 57th Electronic Components and Technology Conference, pp. 1725-1730, 2007.
  5. Vim, M. J., "A Study on the Electrical Conduction Mechanism of Anisotropically Conductive Film for LCD Packing Application," Proc ASME International and Intersociety Electronic/Photonic Packing Conf., pp. 65-72, 1997.
  6. Suh, N. P., "Axiomitic Design," pp. 31-45, 2002.
  7. Hwang, I. K., Kim, D. M., Park, J. S. and Chae, S. W., "A study on the Improvement of High Temperature Bonding Performance of LCD Panel Bonding Equipment," Proceedings of KSME Autumn Conference, pp. 441-442, 2007.
  8. $ABAQUS^{TM}$, "ABAQUS Standard User's manual Version 6.3," 2005.
  9. $Minitab^{TM}$, "MiniTAB V14," 2005.
  10. Na, S. L., "Design Optimization of Auto-Body Members for Crashworthiness Enhancement with the Response Surface Method," Master's Thesis, Mechanical Engineering, KAIST, 2003.
  11. Hong, K. J., Jeon, K. K., Cho, Y. S., Choi, D. H. and Lee, S. J., "A Study on the Construction of Response Surfaces for Design," Trans. of the KSME(A), Vol. 24, No. 6, pp. 1408-1418, 2000.