DOI QR코드

DOI QR Code

Effect of Radius of Curvature of a Corona Needle on Ionic Wind Generation

방전 침전극의 곡률반경이 이온풍 발생에 미치는 영향

  • 황덕현 (경북대 대학원 전자전기컴퓨터학부) ;
  • 문재덕 (경북대 전자전기컴퓨터학부)
  • Published : 2010.03.01

Abstract

An electric fan for cooling high density electronic devices is limited and operated in very low efficiency. The corona discharge is utilized as the driving mechanism for an ionic gas pump, which allows for air flow control and generation with low noise and no moving parts. These ideal characteristics of ionic pump give rise to variety applications. However, all of these applications would benefit from maximizing the flow velocities and yields of the ionic pump. In this study, a needle-mesh type ionic pump has been investigated by focusing on the radius of curvature of corona needle points elevating the ionic wind velocity and efficiency. It is found that the radius of curvature of the corona discharge needle point influences significantly to produce the ionic wind and efficiency. As a result, an elevated ionic wind velocity and increased ionic wind generation yield can be obtained by optimized the radius of curvature of the corona needle electrode.

Keywords

References

  1. B. Komeili, J.S. Chang, G.D. Harvel, C.Y. Ching, "Electrohydrodynamically Enhanced Capillary Evaporator," International Symposium on New Plasma and Electrical Discharge Applications and on Dielectric Materials, pp. 111-116, August 2007.
  2. F. Yang, N.E. Jewell-Larsen, D.L. Brown, K. Pendergrass, D.A. Parker, I.A. Krichtafovitch, A.V. Mamishev, "Corona driven air propulsion for cooling of electronics, XIIIth International Symposium on High Voltage Engineering," pp. 1-4, 2003.
  3. PC Power and Cooling, Inc., "Rotary fan efficiency for Intel processor fan," January 2002.
  4. F. Pollak, "New Micro-architecture Challenges in the Coming Generation of CMOS Process Technologies," Micro 32, 1999.
  5. R. Mestiri, R. Hadaji, S.B. Nasrallah, "The electrical discharge as a source of a mechanical energy," Desalination, Vol. 220, pp. 468-475, 2008. https://doi.org/10.1016/j.desal.2007.01.048
  6. H. Tsubone, B. Komeili, S. Minami, G.D. Harvel, K. Urashima, C.Y. Ching, J.S. Chang, "Flow characteristics of dc wire-non-parallel plate electrohydrodynamic gas pump," Journal of Electrostatics, Vol. 66, pp. 115-121, 2008. https://doi.org/10.1016/j.elstat.2007.09.002
  7. M. Rickard, D. Dunn-Rankin, F. Weinberg, F. Carleton, "Maximizing ion-driven gas flows," Journal of Electrostatics, Vol. 64, 368-376, 2006. https://doi.org/10.1016/j.elstat.2005.09.005
  8. E. Moreau, and G. Touchard, "Enhancing the mechanical efficiency of electric wind in corona discharge," Journal of Electrostatics, Vol. 66, pp. 39-44, 2008. https://doi.org/10.1016/j.elstat.2007.08.006
  9. B. Komeili, J.S. Chang, G.D. Harvel, C.Y. Ching, D. Brocilo "Flow characteristics of wire-rod type electrohydrodynamic gas pump under negative corona operations," Journal of Electrostatics, Vol. 66, pp. 342-353, 2008. https://doi.org/10.1016/j.elstat.2008.02.004
  10. J. Moon, J. Jung, S Gum, "The Effect of a Strip-type Third Electrode of a Wire-Plate Type Nonthermal Plasma Reactor on Corona Discharge and Ozone Generation Characteristics," International Journal of Plasma Environmental Science and Technology. Vol. 2, No. 1, pp. 26-33, 2008.
  11. 田春生, 放電.高電壓工學, 서울:동명사, 1980, pp. 88-89.
  12. 문재덕, 김창수 "펄스電壓을 인가한 円톱날形 오존發生器의 特性硏究," 전기학회논문지, 11호, 36권, pp. 806-812. 1987.
  13. Rafika Mestiri, Ramzi Hadaji, Sassi Ben Nasrallah, "The electrical discharge as a source of a mechanical energy," Desalination 220, pp. 468-475, 2008. https://doi.org/10.1016/j.desal.2007.01.048
  14. H.J. White, Industrial Electrostatic Precipitation, Addison-Wesley Pub. Co. 1963, pp. 97-100,