Study on Characteristics of Low Cycle Fatigue for High Alloy and Austenite Stainless Steel

고합금강과 오스테나이트 스테인레스 강의 저사이클 피로 특성 연구

  • Received : 2010.08.23
  • Accepted : 2010.10.21
  • Published : 2010.12.31

Abstract

As the steam temperature of fossil power plant boiler is increasing, the use of 9Cr-1Mo high alloy material is prevalent and it is needed to investigate the characteristics of low cycle fatigue for high alloy and austenite stainless steel that has used up to recently. As a result of test, in 9Cr-1Mo high alloy steel, the relation of strain and fatigue life is non-linear and the crack mode of low cycle fatigue is brittle but in the austenite stainless steel, that of strain and fatigue life is linear and the crack mode of low cycle fatigue is ductile. Comparing the fatigue life between high alloy and austenite stainless steel, there is no consistent characteristics as to strains. But the fatigue life of 9Cr-1Mo steel is longer by 25% than that of STS304 stainless steel in the relatively low, 0.3% strain. In the other strain, the fatigue life of two materials is similar.

Keywords

References

  1. 한국전력기술(주), 1994, "보령화력 5. 6호기 보수지침서", 서울, pp. 2-1.
  2. 한국전력공사, 1998, "영흥화력발전소 1, 2호기 보일러 공급 계약서", 서울, pp. II-186
  3. 한국전력공사, 1989, "삼천포화력발전소 3, 4호기 보일러 공급계약서", 서울, pp. II-211
  4. 한국전력기술(주), 2002, "태안화력 5, 6호기 발전소 Data Book(I)", 서울, pp. 2-106-2-112
  5. K. T. Rie and H. P. Stuwe, 1974, Int. J. Frac., Springer, Vol. 10, pp. 545 https://doi.org/10.1007/BF00155257