DOI QR코드

DOI QR Code

전체송전용량 향상을 위한 STATCOM 설비의 적용 위치 선정 및 과도안정도를 고려한 전체송전용량 분석

A Study on Location of STATCOM for Improvement of Total Transfer Capability and Analysis of Total Transfer Capability Considering Transient Stability

  • 투고 : 2009.10.12
  • 심사 : 2010.02.16
  • 발행 : 2010.04.30

초록

송변전설비들이 점점 중부하로 운용되어짐에 따라 송전용량이 전력회사에서 중요한 문제로 부각되어 왔다. 한전 시스템의 경우 전체송전용량은 주로 전압 안정도에 의해 제한을 받고 있으며, 이의 향상을 위한 연구들이 계속하여 수행되어 오고 있다. 본 논문에서는 전압안정도 관점에서의 전체송전용량을 향상시키기 위하여 STATCOM 설비를 설치하는 위치를 효과적으로 선택하기 위한 송전용량지수가 제시된다. 이 지수를 소규모 전력시스템인 IEEE 39모선 시스템에 적용하여 제시된 지수의 효과를 보여준다. 그리고, 이 소규모 시스템을 활용하여 부하가 증가할 때 전체송전용량에 전압안정도뿐 만이 아니라 과도안정도가 미치는 영향을 분석한다.

The power transfer capability has been recently highlighted as a key issue in many utilities with the power system more stressed and heavy loaded. The total transfer capability in the KEPCO power system is determined mainly by the voltage stability limit and many approaches for enhancement of the total transfer capability has been consistently performed. In this paper, a new transfer capability index to locate the STATCOM(Static Synchronous Compensator) effectively for enhancing the total transfer capability from a static voltage stability viewpoint is presented and it is applied to a small scale power system of IEEE 39-bus test system in order to show the effects of this index. In addition, the effect of transient stability as well as voltage stability to the total transfer capability when loads are increased is analyzed using this small scale power system.

키워드

참고문헌

  1. P.W. Sauer, K.D. Demaree and M.A. Pai, “Stability limited load supply and interchange capability”, IEEE Transactions on PAS, Vol. PAS-102, No. 11, pp. 3637-3643, Nov., 1983. https://doi.org/10.1109/TPAS.1983.317726
  2. James D. McCally, John F. Dorsey, Zhihua Qu, “A new methodology for determining transmission capacity margin in electric power systems”, IEEE Transactions on Power Systems, Vol. 6, No. 3, pp. 944-951, Aug., 1991. https://doi.org/10.1109/59.119233
  3. C. S. Indulker, B. Viswanathan, and S. S. Venkata, “Maximum Power Transfer Limited by Voltage Stability in Series and Shunt Compensated Schemes for A.C Transmission Systems”, IEEE Trans.-PD, Vol. 4, No. 2, pp. 1246-1252, 1989.
  4. JA. J. Flueck, H. D. Chang, and K. S. Shah, “Investigating the Installed Real Power Transfer Capability of a Large Scale Power System Under a Proposed Multiarea Interchange Schedule Using CPFLOW”, IEEE Trans.-PS, Vol. 11, No. 2, pp. 883-889,1996.
  5. T. Nagao, K. Tanaka, K. Takenaka, “Development of static and simulation programs for voltage stability studies of bulk power system”, IEEE Transactions on Power Systems, Vol. 12, No. 1, pp. 273-281, Feb. 1997. https://doi.org/10.1109/59.574948
  6. A. B. Khairuddin, S. S. Ahmed, M. W. Mustafa, A. A. M. Zin, H. Ahmad, “A novel method for ATC computations in a large-scale power system”, IEEE Transactions on Power Systems, Vol. 19, No. 2, pp. 1150-1158, May 2004. https://doi.org/10.1109/TPWRS.2004.825933
  7. C. W. Taylor, “Power system voltage stability”, McGraw-Hill, 1994.