DOI QR코드

DOI QR Code

The Study of Analysis on Water Vapor Condensation on Automobile Headlamp Using the Numerical Model

수치모델을 이용한 자동차 헤드램프 내부의 습기발생 현상 해석 연구

  • Received : 2009.06.04
  • Accepted : 2010.04.02
  • Published : 2010.05.01

Abstract

Increasing styling features for automotive headlamps speed up the focus of understanding condensation at inner surfaces. Water vapor condensation on the inside surface of the headlamp lens is an essential factor that affects secure front view and headlamp life. One of the headlamps of automobile which is one of the most popular in Korea was chosen for the present analysis. In the basis of the experimental data of automobile given by a manufacturer, boundary conditions were defined and free convection of the air inside the headlamp and radiation from the bulb to the other surfaces are considered. As a result, temperature distribution of the inside surface of the headlamp lens are approximately the same as the experimental result.

Keywords

References

  1. S. Senin, Thermal analysis in automotive components, in : International Symposium on Automotive Lighting - ISAL, Vol. 6, pp. 450-459, 2005.
  2. Donghan Ryu, Analysis of Condensation Phenomenon Inside Headlamps, KSAE, Vol. 8, 2008.
  3. E. Preihs, Automotive Headlamp -Analytic Solution and Measurements of Condensation inside a Headlamp, COMSOL Conference, 2006.
  4. J. Langebach, Experimental study of convection and radiation interaction in a headlight model using pressure variation, Experimental Thermal and Fluid Science, Vol. 32, pp. 521-528, 2007. https://doi.org/10.1016/j.expthermflusci.2007.06.005
  5. J.M.M. Sousa, An experimental investigation of fluid flow and wall temperature distributions in an automotive headlight, HEAT AND FLUID FLOW, Vol. 26, pp. 709-721, 2005. https://doi.org/10.1016/j.ijheatfluidflow.2005.05.003
  6. S.M. ElSherbiny, K.G.T. Hollands, G.D. Raithby, Effect of thermal boundary conditions and natural convection in vertical and inlined air layers, Journal of Heat Transfer Vol. 104, pp. 515-520, 1982. https://doi.org/10.1115/1.3245123
  7. Frank P. Incropera., David P. De Witt., Introduction to Heat Transfer., 4th Edition., Wiley, pp.673-677, 2002.
  8. K.T. Yang, Numerical modeling of natural convection - radiation interactions in enclosures, in: Proceedings of the 8th International Heat Transfer Conference, No. 1, pp. 131-140, 1986.
  9. H.S. Lee, Thermal analysis inside a small chamber including radiation, SAREK, Vol. 6, No. 31, pp. 194-199, 2006.
  10. F.C. Lockwood, A new radiation solution method for incorporation in general combustion prediction procedures, Proceedings of the 18th International Symposium on Combustion, pp. 1405-1413, 1981
  11. Okada, Y., Nouzawa, T., Nakamura, T., CFD analysis of the flow in an automotive headlamp. JSAE Review, Vol. 23, No. 1, pp. 98-100, 2002