Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Fatigue Characteristic of High Impact Polystyrene(HR-1360) Materials

HIPS(HR-1360) 재료의 피로 특성 평가

  • Received : 2010.02.04
  • Accepted : 2010.04.20
  • Published : 2010.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In recent times, there has been considerable interest in HIPS (High Impact Polystyrene) materials for their use in construction of office equipments, home electronics, housing for electronics appliances, packing containers, etc. However, these materials suffer from problems caused by fatigue fracture. Further, their strength is substantially affected by environmental conditions. Therefore, in this study, the effect of temperature was analyzed by performing a tensile test and a fatigue test. It was observed that the yield strength, the ultimate strength, and the fatigue life decreased relatively with an increase in temperature. Further, an S-N curve can be predicted by using the results of the tensile test and a micro-Vickers hardness test.

최근에는 물류비용의 증가로 인한 경제적 문제 해결과 사용자의 편의성, 효율 증대를 위하여 많은 사무용 기기 및 가전제품의 부품이 고분자 복합재료로 대체되고 있다. 금속 재료와 비교해 볼 때 이러한 고분자 복합재료는 내구 한도가 낮고 환경에 따라 변형이 심하여 사용 횟수의 증가 및 사용 시간의 증가로 인해 피로 파괴 문제가 빈번하게 발생하고 있다. 본 논문에서는 최근 많이 사용되고 있는 HIPS(High Impact Polystyrene, HR-1360) 재료를 대상으로 하여 $20^{\circ}C$(상온), $40^{\circ}C$, $60^{\circ}C$ 환경 조건에서의 정적 강도 특성을 평가 하였으며, 피로 시험을 통하여 HIPS 재료의 피로 수명(S-N) 선도를 구하였다. 또한 마이크로 비커스 경도 시험기를 이용한 경도 시험을 통해 인장강도와 내구 한도를 예측해 보았다.

Keywords

References

  1. Dhingra, A. K. and Doherty, T. P., 1993, "Future Trends in Advanced Fibers and Composite Materials Technology," Advanced Composites '93 International Conference on Advaced Composite Materials, pp.29-34
  2. Jae-Kyoo Lim, Han-Ju Park and Yon-Jig Kim, 1999, “Environmental Effect Evaluation on Strength Properties of Short Fiber Reinforced PP Composites," Trans. of the KSME(A), Vol.23, No. 5, pp.772-779
  3. Mitchell, M.R., 1979, “Fundamental of Modern Fatigue Analysis for Design," Fatigue and Microstructure, American Society for Metals, Metals Pack, pp. 385-437.
  4. ASTM Standard E8, "Standard Test Methods for Tension Testing of Metallic Materials," Annual Book of ASTM Standards, ASTM Philadelphia
  5. ASTM Standard E21, "Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials," Annual Book of ASTM Standards, ASTM Philadelphia
  6. ASTM Standard D638, "Standard Test Method fpr Tensile Properties of Plastics," Annual Book of ASTM Standards, ASTM Philadelphia
  7. ASTM Standard E466, "Standard Practice for Conducting Constant Amplitude Axial Fatigue Tests of Metallic Materials," Annual Book of ASTM Standards, ASTM Philadelphia
  8. ASTM Standard E468, "Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials," Annual Book of ASTM Standards, ASTM Philadelphia
  9. ASTM Standard E739, "Standard Practice for Statistical Analysis of linear or Linearized Stress-Life (S-N) and Strain-Life (${\varepsilon}$-N) Fatigue Data," Annual Book of ASTM Standards, ASTM Philadelphia
  10. Thorkildsen, R. L., 1964, Engineering Design for Plastics, E. Baer(Ed.), Van Nostrand-Reinhold, New York, p. 279.
  11. Sauer, J. A. and Chen, C. C., 1983, Adv. Poly. Sci., Vol. 52/53, p. 169.
  12. Sauer, J. A. and Chen, C. C., 1985, Thoughening of Plastics, Plastics and Rubber Institute, London, UK, p. 26.
  13. Roessle, M.L. and Fatemi, A., 2000, “ Strain Controlled Fatigue Properties of Steels and Some Simple Approximations,” International Journal of Fatigue, Vol.22, pp. 495-511. https://doi.org/10.1016/S0142-1123(00)00026-8
  14. Baumel, A. Jr and Seeger, T., 1990, “Metals Data for Cyclic Loading," Elsevier Science Publishers, Amsterdam.
  15. Kwang-Soo Lee and Ji-Ho Song, 2006, “Estimation Methods for Strain-Life Fatigue Properties From Hardness," Annual Fall Conferences of the KSME, pp. 7-12.