A Study on the Effectiveness of a Guide Hole on Crack Growth Control in Blasting

발파에서 가이드공의 균열제어 유효성에 관한 실험적 연구

  • 이희광 (전북대학교 자원.에너지공학과) ;
  • 김승곤 (전북대학교 자원.에너지공학과) ;
  • 조상호 (전북대학교 자원.에너지공학과)
  • Received : 2010.04.12
  • Accepted : 2010.04.22
  • Published : 2010.04.30

Abstract

Model blast experiments of mortar blocks were performed to investigate the effect of the guide hole on crack growth. The mortar block specimens have a blast charge hole and 8 guide holes. Two of circular guide hole, notched guide hole, diamond shaped guide hole and diamond shaped guide holder are installed around 110 mm, 165 mm and 220 mm apart from the charge hole for each specimen. From the blast experiments, it was revealed that all the guide hole used in this study were effective for controlling the crack growth at the fracture control.

화약류를 이용한 발파에서 가이드공의 균열제어효과를 검토하기 위하여 모르타르 공시체를 이용한 발파실험을 수행하였다. 모르타르 블록의 중앙에 장약공을 설치하고 주변에 방사상으로 4종류의 가이드공을 각각 두 개씩 설치하였다. 4종류의 가이드공은 원형, 노치형, 다이아몬드형, 다이아몬드 홀더형이며, 장약공과 가이드공의 간격은 각각 110 mm, 165 mm, 220 mm으로 하여 3가지 형태의 모르타르 공시체를 제작하였다. 발파 실험 후 공시체에 대한 분석결과, 적용된 가이드공 모두 균열제어효과를 보였으며 같은 폭발압력에서는 노치 가이드 공이 보다 높은 균열제어효과를 나타내었다.

Keywords

References

  1. 中川浩二, 坂本, 仡, 吉開亮介, 1982, 스므스블라스팅에서 가이드공의 이용에 관한 기초실험, 일본화약학회, 43.2, pp.75-82.
  2. 中村裕一, 岩本誠治, 大原 直, 椋木淳二, 1997, 폭파 균열 제어에서 노치 가이드공의 유효성에 관한 모델실험, 일본화약학회, 58.3, pp.131-137.
  3. Nakamura, Y., S.H. Cho, M. Yoneoka, M. Yamamoto, K. Kaneko, 2004, Model Experiments on crack propagation between two charge holes in blasting, Science and Technology of Energetic Materials, 65.2, pp.34-39.
  4. Cho, S.H., Y. Nakamura, B. Mohanty, H.S. Yang, K. Kaneko, 2008, Numerical study of fracture plane control in laboratory-scale blasting, Engineering Fracture Mechanics, 75, pp.3966-3984. https://doi.org/10.1016/j.engfracmech.2008.02.007
  5. Fukuda, D., K. Kaneko, K. Ishiyama, M. Naitoh, S.H. Cho, 2009, Numerical method for achieving smoothness of fracture plane and minimizing overbreak in tunnerblasting, 2009, Korea-Japan Joint Symposium on Rock Engineering, pp.125-134.
  6. 椋木淳二, 大原直, 秋吉直義,国武誠二,1992, 新發破工法의 開發, 윙그홀 비트, 윙그홀 블라스팅공법, 터널과 지하, 일본터널기술협회지, 23.7, pp.41-45
  7. 정동호, 문상조, 안대진, 정원준, 김은관, 김동규, 2008, 발파공해 해소 및 여굴 최소화를 위한 선균열 암굴착 노치장비 개발에 관한 연구, 터널과 지하공간(한국암반공학회지), 17.3, pp.216-224.
  8. 조상호, 양형식, 金子 勝比古, 2004, SB발파에서 지발뇌관의 기폭초시오차가 암반파괴과정에 미치는 영향, 터널과 지하공간(한국암반공학회지), 14.2, pp.121-132.