DOI QR코드

DOI QR Code

Shock Response Prediction of a Low Altitude Earth Observation Satellite During Launch Vehicle Separation

  • Lee, Dae-Oen (Department of Aerospace Engineering Korea Advanced Institute of Science and Technology) ;
  • Han, Jae-Hung (Department of Aerospace Engineering Korea Advanced Institute of Science and Technology) ;
  • Jang, Hae-Won (Department of Mechanical Engineering Korea Advanced Institute of Science and Technology) ;
  • Woo, Sung-Hyun (Korea Aerospace Research Institute) ;
  • Kim, Kyung-Won (Korea Aerospace Research Institute)
  • 발행 : 2010.03.01

초록

Several pyrotechnic devices are employed over the course of satellite's missions, generally for the separation of structural subsystems and deployment of appendages. Firing of pyrotechnic devices results in impulsive loads characterized by high peak acceleration and high frequency content which can cause failures of various flight hardware elements and small components. Thus, accurate prediction of acceleration level in various components of spacecraft due to pyrotechnic devices is important. In this paper, two methods for pyroshock prediction, an empirical model and statistical energy analysis in conjunction with virtual mode synthesis, are applied to predict shock response of a low altitude earth observation satellite during launch vehicle separation. The predicted results are then evaluated through comparison with the shock test results.

키워드

참고문헌

  1. Mulville, D.R., 1999, Pyroshock Test Criteria, National Aeronautics and Space Administration.
  2. Irvine, T., 2002, An Introduction to the Shock Response Spectrum, Vibrationdata.com.
  3. Baumann, R.C., 1996, General Environmental Verification Specification For STS& ELV Payloads, Subsystems, and Components, NASA Goddard Space Flight Center.
  4. Himelblau, H. et al., 2001, Dynamic Environmental Criteria, National Aeronautics and Space Administration.
  5. Lyon, R.H. and Dejong, R.G., 1998, Theory and Application of Statistical Energy Analysis (2nd edition), RH Lyon Corp., Cambridge.
  6. Dalton, E., and Chambers, B., 1995, “Analysis and Validation Testing of Impulsive load Response in Complex, Multi-Compartmented Structures”, Proceedings of the 36th AIAA Structures, Structural Dynamics, and Materials Conference.
  7. VA One 2008 Shock Module User's Guide and Theory, 2008, ESI Group.

피인용 문헌

  1. Review of pyroshock wave measurement and simulation for space systems vol.45, pp.4, 2012, https://doi.org/10.1016/j.measurement.2011.12.011
  2. COMS Shock Test Assessment by Using the Extrapolation Method vol.40, pp.5, 2012, https://doi.org/10.5139/JKSAS.2012.40.5.439
  3. Pyroshock Acceleration Field Reconstruction in Temporal and Spectral Domains Based on Laser Shock Scanning and Iterative Decomposition and Synthesis Considering Stop Band Effects vol.2017, 2017, https://doi.org/10.1155/2017/8351791
  4. A correlation study of satellite finite element model for coupled load analysis using transmissibility with modified correlation measures vol.33, pp.1, 2014, https://doi.org/10.1016/j.ast.2014.01.002
  5. Pyroshock Prediction of Ridge-Cut Explosive Bolts Using Hydrocodes vol.2016, 2016, https://doi.org/10.1155/2016/1218767
  6. Vibratory loads and response prediction for a high-speed flight vehicle during launch events vol.17, pp.4, 2016, https://doi.org/10.5139/IJASS.2016.17.4.551