DOI QR코드

DOI QR Code

질량분사가 있는 채널 내부 난류 유동의 외부교란에 대한 주파수 특성

Frequency Response of Turbulent Flow to Momentum Forcing in a Channel with Wall Blowing

  • 나양 (건국대학교 기계공학과) ;
  • 이창진 (건국대학교 항공우주공학과)
  • 투고 : 2009.09.15
  • 심사 : 2009.12.18
  • 발행 : 2010.01.01

초록

하이브리드 로켓 모터 내부에서는 산화제에 의한 주유동과 연료의 기화로 발생된 분출 유동이 상호작용을 하기 때문에 매우 강한 전단층이 발생되며 이에 기인한 시간특성이 나타나게 된다. 이 시간특성이 난류 유동장에 부과되면서 매우 복잡한 유동간섭 현상이 발생되게 되는데, 이와 같은 간섭현상이 외부교란에 대해 어떻게 반응하는지를 살펴보는 것은 안정적인 연소과정을 위해서 매우 중요하다. 이를 연구하기 위하여 연소반응을 제외하고, 산화제의 난류 유동과 연료 벽면에서의 분출 유동을 모사한 채널 유동에 대한 LES 해석을 수행하였으며, momentum forcing기법을 사용하여 특정주파수를 부과하는 집중교란(concentrated forcing)과 백색소음과 같은 넓은 범위의 주파수 특성을 부과하는 분산교란(distributed forcing)에 대한 유동의 반응을 살펴보았다. 두 경우 모두 모터의 하류에서 외부교란의 특성시간을 유지하였으나 비약적인 유동의 공진현상으로 연결되지는 않는다는 것을 확인하였다. 이는 외부교란의 특성은 시스템의 고유진동수 및 Kelvin-Helmholtz 불안정성에 기인한 특성 진동수와 함께 고려되어야 한다는 것을 의미한다.

Due to the interaction between main oxidizer flow and the wall injected flow resulting from the regression process, a specific time characteristics identified in the frequency spectrum of streamwise velocity is generated in the hybrid rocket motor. In order to understand the response of the turbulent flow to two different types of external momentum forcing, LES analysis was conducted without considering the combustion. It turns out that both concentrated and distributed forcings do not lead to the disastrous resonance phenomenon. Energy contents are enhanced due to the added momentum but the peak frequency was not modified in the turbulent flow near the end of the rocket motor. Natural frequency of the flow system should be taken into account to further pursue the instability issue by using external forcing.

키워드

참고문헌

  1. C. Lee, Y. Na, Y. Hwang, and S. Lee, Turbulent flow in the helical grain of hybrid rocket fuel, AIAA-2006-4344, 41st AIAA Joint propulsion meeting, Sacramento, Ca., 2006.
  2. B. Evans, Nicholas A. Favorito, and K. K. Kuo. "Oxidizer-Type and Aluminum-Particle Addition Effects on Soild-Fuel Burning Behavior", AIAA paper 06-4676, 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2006.
  3. 구원모, 이창진, 산화제 난류 유동 변화에 대한 하이브리드 로켓 연소 특성, 한국추진공학회 춘계학술대회 논문, 2007.
  4. K.H Shin, C. Lee, S. Y. Chang, and J. Y. Koo, “The enhancement of regression rate of hybrid rocket fuel by various method", AIAA 2005-0359, 2005.
  5. C. Lee and Y. Na, "Large Eddy Simulation of Flow Development with Surface Mass Injection", J. Propulsion and Power, Vol. 25, No. 1, pp. 51-59, 2009. https://doi.org/10.2514/1.34980
  6. J. P. Avres and H. S. Jones, "Explanation of DC-shift in Hybrid Rocket Motor", AIAA Paper 1997-2938, 1997.
  7. Boardmann T. A., Carpenter, R. L. and Clafin, S. E., A Comparative Study of the Effect of Liquid versus Gaseous Oxygen Injection on Combustion Stability in 11 inch Diameter Hybrid Motors, AIAA Paper 1997-2936, 1997.
  8. J. P. Avres and H. S. Jones, "Elimination of DC-shift in Hybrid Motors", AIAA Paper 1997-2939, 1997.
  9. M. A. Karabeyoglu "Thermal Transients in Hybrid Rockets Fuel Grains-Non-Linear Effects" AIAA paper 07-5369, Cincinnati, OH, 2007.
  10. G. Avalon, G. Casalis, and J. Griffond, "Flow Instabilities and Acoustic resonance of channels with wall injection", AIAA paper 98-3218, Cleveland, OH, 1998.
  11. S. V. Apte, and V. Yang, A large eddy simulation study of transition and flow instability in a porous-walled chamber with mass injection, J. Fluid Mechanics, Vol. 477, pp. 215-225, 2003.
  12. 나양, 이창진, 분출유동이 있는 채널 난류 유동의 LES 해석, 항공우주학회지, 제35권 제8호, pp. 699-705, 2007.
  13. 나양, 이창진, 채널유동에서 질량분사에 의한 표면유동의 진동 특성, 항공우주학회지, 제37권 제1호, pp. 62-68, 2009. https://doi.org/10.5139/JKSAS.2009.37.1.062
  14. J. Zhou, C. D. Meinhart, S. Balachandra and R. J. Adrian, "Formation of Coherent Packets in Wall Turbulence", Self-Sustaining Mechanisms of Wall Turbulence, edited by R. L. Panton, Computational Mechanics Publications, Boston, MA, pp. 109-134, 1997.

피인용 문헌

  1. Internal Flow Dynamics and Regression Rate in Hybrid Rocket Combustion vol.13, pp.4, 2012, https://doi.org/10.5139/IJASS.2012.13.4.507