DOI QR코드

DOI QR Code

Analysis of Rotordynamic Design Characteristics and Vibration Reduction of an Air Turbo Compressor for Oxygen Plant

산소공장 공기터보압축기(ATC)의 회전체동역학 설계특성 분석 및 진동저감

  • 김병옥 (한국기계연구원 시스템다이나믹스연구실) ;
  • 이안성 (한국기계연구원 시스템다이나믹스연구실)
  • Received : 2010.03.24
  • Accepted : 2010.05.19
  • Published : 2010.06.01

Abstract

In this study rotordynamic characteristics of an air turbo-compressor (ATC) used in oxygen plant are analyzed and its operating-speed balancing is performed to solve the vibration trouble caused by rotor unbalance. Three dimensional model of the ATC rotor is completed and then analytical FE (finite element) model, which is verified by experimental modal testing, is developed. A rotordynamic analysis includes the critical map, Campbell diagram, and unbalance response, especially considering the pedestal housings supporting tilting pad bearings. A test run of operating-speed, using tilting-pad bearing of actual use, showed that the vibration level increased very sharply as approaching the rated speed. The operating-speed balancing specified by API 684 was carried out by using influence coefficient method. The results showed that the vibrations at the bearing pedestal housings represented good levels of 0.1 mm/s. From the test run and operating-speed balancing, the analytical results, that is, critical speeds are in good agreement with the test results and unbalance responses introducing the correction masses are similar to the as-is test responses in its aspect.

Keywords

References

  1. API STANDARD 684, 2005, “Rotordynamics Tutorials: Lateral Critical Speeds, Unbalance Response, Stability, Train Torsional, and Rotor Balancing”
  2. 김병옥, 이안성, 이동환, 김영철, 2007, “회전기계의 신뢰성 보장을 위한 로터다이나믹 해석절차,” 유체기계저널, Vol. 10, No. 5, pp. 64-73. https://doi.org/10.5293/KFMA.2007.10.5.064
  3. API STANDARD 617, 2002, “Axial and Centrifugal Compressors and Expander-compress-ors for Petroleum, Chemical and Gas Industry Services”.
  4. 이안성, 김병옥, 2009, “정유공정 압축기의 10,500rpm 운전속도 밸런싱을 통한 MCS의 확장,” 유체기계저널, Vol. 12, No. 6, pp. 41-46. https://doi.org/10.5293/KFMA.2009.12.6.041
  5. Darlow, M. S., 1988, Balancing of High-Speed Machinery, Springer-Verlag, New York.