Korean Journal of Agricultural Science (농업과학연구)

Institute of Agricultural Science, CNU (충남대학교 농업과학연구소)
권호 표지
DOI QR코드

DOI QR Code

Engineering Properties of Permeable Polymer Concrete for Pavement Using Polypropylene Fiber

폴리프로필렌섬유를 혼입한 포장용 투수성 폴리머 콘크리트의 공학적 성질

  • Sung, Chan-Yong (Dept. of Agricultural and Rural Engineering, Coll. of Agri. Life and Sci, Chungnam National University) ;
  • Lee, Seung-Hoon (Dept. of Agricultural and Rural Engineering, Coll. of Agri. Life and Sci, Chungnam National University)
  • 성찬용 (충남대학교 농업생명과학대학 지역환경토목학과) ;
  • 이승훈 (충남대학교 농업생명과학대학 지역환경토목학과)
  • Received : 2010.08.08
  • Accepted : 2010.09.17
  • Published : 2010.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Research on permeable pavement like asphalt and concrete pavement with porous structure has been increasing due to environmental and functional need such as reduction of run off and flood. This study was performed to evaluate void ratio, permeability coefficient, and compressive strength of permeable polymer concrete (PPC) using crushed and recycled coarse aggregate that is obtained from waste concrete. Also, 6 mm length of polypropylene fiber was used to increase toughness and interlocking between aggregate and aggregate surrounded by binder. Binder and filler used were unsaturated polyester resin and CaCO3, respectively. The mix proportions were determined to satisfy the requirement for the workability and slump according to aggregate sizes 5~10 mm. In the test results, regardless of kinds of aggregates and fiber contents, the void ratio, permeability coefficient and compressive strength of all types of PPC showed the higher than the criterion of porous concrete that is used in permeable pavement in Korea. Also, strengths of PPC with increase polypropylene fiber volume fraction showed slightly increased tendency due to increase binder with increase of fiber volume fraction. Accordingly, polypropylene fiber and recycled coarse aggregate can be used for permeable pavement.

Keywords

References

  1. Chae, C.W. 2002. Physical properties of porous concrete using admixtures. Journal of the Korea Concrete Institute 14(2): 257-265. (in Korean). https://doi.org/10.4334/JKCI.2002.14.2.257
  2. Choi, J.J., H.J. Yu. 2010. Effects of filling materials on the physical properties of permeable polymer concrete. Journal of the Korean Society of Civil Engineers 30 (2A): 177-184. (in Korean).
  3. Civil Engineering Standard Specification. 2005. Permeability Concrete Pavement (07154). (in Korean).
  4. Folwer. D.W. 1994. Current uses of polymer concrete in the United States. Proceedings of the First East Asia Symposium on Polymers in Concrete: 3-9.
  5. Gowripalan, N., S.H. Yang, C.G. Han. 2003. A fundamental study on the development of permeable polymer concrete for balcony bricks. Proceedings of the Fourth ASPIC: 185-194.
  6. Kim, M.H., Y.K. Baik., S.P. Kang., Y.R. Kim, J.H. Kim. 2000. Fundamental properties of porous concrete according to sizes of aggregate. Journal of the Korea Concrete Institute 13(5): 438-446. (in Korean).
  7. Kim, S.B., K.S. Yeon, N.H. Ryu. 2004. Flexural properties of glass fiber reinforced polymer concrete composite panel. Journal of the Korean Society of Agricultural Engineers 46(6): 37-45. (in Korean). https://doi.org/10.5389/KSAE.2004.46.6.037
  8. Kim, Y.I., C.Y. Sung. 2005. Characteristics of environmentfriendly porous polymer concrete for permeable pavement. Journal of the Korean Society of Agricultural Engineers 47(7): 25-33. (in Korean). https://doi.org/10.5389/KSAE.2005.47.7.025
  9. Kawakami, M., H. Tokushige, S. Matsuoka. 2002. Physical properties of porous polymer concrete using recycled plastic aggregates. Cement Science and Concrete Technology 55: 645-650.
  10. Ko, E.J., E.J. Goh., H.J. Seok, S.H. Lee. 2009. A study of developing guides for the construction site quality control of porous concrete. The Journal of the Korean Institute of Building Construction 9(3): 65-71. (in Korean). https://doi.org/10.5345/JKIC.2009.9.3.065
  11. Lee. Y.S., M.K. Joo. 2002. Fundamental properties of water-permeable polymer-modified concrete. Journal of the Korea Concrete Institute 14(3): 402-408. (in Korean). https://doi.org/10.4334/JKCI.2002.14.3.402
  12. Lho, B.C., K.H. Choi, J.H. Kim. 2007. An experimental study on permeability in elevation of porous concrete using unsaturated polyester resin. Journal of the Korea Concrete Institute 19(2): 163-169. (in Korean). https://doi.org/10.4334/JKCI.2007.19.2.163
  13. Noh, K.H., C.Y. Sung. 2004. Mechnical and drying shrinkage properties of polypropylene fiber reinforced high flow concrete. Journal of the Korean Society of Agricultural Engineers 46(5): 79-85. (in Korean). https://doi.org/10.5389/KSAE.2004.46.5.079
  14. Park. S.B., D.S. Seo, J. Lee. 2004. A study on the sound absorption properties of porous concrete by recycled aggregate contents and target void ratio. Journal of the Korea Concrete Institute 16(4): 541-548. (in Korean). https://doi.org/10.4334/JKCI.2004.16.4.541
  15. Park. S.B., E.S. Yoon., D.S. Seo, J. Lee. 2005. Mechanical properties of porous concrete for pavement using recycled aggregate and polymer. Journal of the Korea Concrete Institute 17(4): 595-602. (in Korean). https://doi.org/10.4334/JKCI.2005.17.4.595
  16. Sung, C.Y., H.J. Jung. 1996. Engineering properties of permeable polymer concrete with stone dust and fly ash. Journal of the Korean Society of Agricultural Engineers 38(4): 147-154. (in Korean).
  17. Sung, C.Y. 2004. Permeability of polypropylene fiber reinforced soil concrete pavement materials. Journal of the Korean Society of Agricultural Engineers 46(6): 13-19. (in Korean). https://doi.org/10.5389/KSAE.2004.46.6.013
  18. Sung, C.Y. 2006. Engineering properties of permeable polymer concrete using bottom ash and recycled coarse aggregate. Journal of the Korean Society of Agricultural Engineers 48(7): 25-31. (in Korean). https://doi.org/10.5389/KSAE.2006.48.7.025
  19. Sung, C.Y., Y.I. Kim. 2010. Mechanical properties of permable polymer concrete for permeablilty pavement with recycled aggregate and fiber volume fraction. Journal of the Korean Society of Agricultural Engineers 52(1): 69-77. (in Korean). https://doi.org/10.5389/KSAE.2010.52.1.069
  20. Won, J.P., C.I. Jang., S.W. Lee., H.Y. Kim, W.Y. Kim. 2008. Spalling and internal temperature distribution of high strength column member with polypropylene fiber volume fractions. Journal of the Korean Concrete Institute 20(6): 821-826. (in Korean). https://doi.org/10.4334/JKCI.2008.20.6.821
  21. Youn, J.N., C.Y. Sung, Y.I. Kim. 2009. Physical and mechanical properties of porous concrete using waste activated carbon, Journal of the Korean Society of Agricultural Engineers 51(4): 21-27. (in Korean). https://doi.org/10.5389/KSAE.2009.51.4.021