DOI QR코드

DOI QR Code

Improving Compression and Throat Ratios of Combustion Chamber for Reduction of Exhaust Emissions for a Swirl Chamber Type Diesel Engine

와류실식 디젤기관의 배기배출물 저감을 위한 연소실의 압축비 및 분구면적비 개선

  • Lee, Chang-Kyu (Dept. of the Tractor Research Institute, LSMtron Co. Ltd.) ;
  • Huh, Yun-Kun (Dept. of Biosystems Machinery Engineering, Chungnam National University) ;
  • Seo, Sin-Won (Dept. of the Tractor Research Institute, LSMtron Co. Ltd.)
  • 이창규 (LS엠트론(주) 트랙터연구소) ;
  • 허윤근 (충남대학교 바이오시스템기계공학과) ;
  • 서신원 (LS엠트론(주) 트랙터연구소)
  • Received : 2010.11.12
  • Accepted : 2010.12.13
  • Published : 2010.12.31

Abstract

A swirl chamber type diesel engine attachable to 18 kW agricultural tractors was improved to reduce exhaust emissions. Compression ratio and throat area ratio of the combustion chamber were varied to determine optimum combustion conditions. Tests were composed of full load and 8-mode emission tests. Compression ratio was fixed as 21, but the swirl chamber volume was increased by 3.8%. Output power, torque, specific fuel consumption, exhaust gas temperature, and smoke level were not considerably different for compression ratios of 21.5 (reference condition) and 21 (test condition), while NOx, HC, CO and PM levels for the compression ratio of 21 were decreased by 11%, 46%, 28%, 11%, respectively, from those for the compression ratio of 21.5. The tests were also conducted with a compression ratio of 22 and 4.3% increased chamber volume. Output power, torque, exhaust gas temperature and smoke level were greater, while specific fuel consumption was less for the compression ratio of 22 than those for the compression ratio of 21.5. Increase of compression ratio decreased HC and CO levels by 24%, 39%, but increased NOx and PM levels by 24%, 39%. Based on these results, a compression ratio of 21 was selected as an optimum value. Then, full load tests with the selected compression ratio of 21 were carried out for different throat ratios of 1.0%, 1.1%, 1.2%. Output power and torque were greatest and smoke was lowest when throat area ratio was 1.1%, which satisfied the target values of specific fuel consumption (less than 272 g/$kW{\cdot}h$) and exhaust gas temperature (less than $550^{\circ}C$). Therefore, a throat area ratio of 1.1% was selected as an optimum value.

Keywords

References

  1. 권순익, 심재준. 1993. 간접분사식 디젤기관에서 와류실 형상이 연소에 미치는 영향. 한국자동차공학회 춘계학술대회 논문집 93(1): 445-453.
  2. 라진홍, 안수길. 1998. 와류실식 소형 디젤기관의 연소실 형상이 기관 성능에 미치는 영향(I). 한국동력기계학회지 2(2): 27-34.
  3. 한국농기계공업협동조합, 한국농업기계학회. 2006. 농업기계연감. 한국농기계공업협동조합, 서울.
  4. Okazaki, T., M. Sugimoto, S. Fujii, Y. Kabe, T. Sakano, K. Funaki. 2004. Development of small IDI diesel engine using numerical approaches. SAE 20044341, SAE, Warrendale, PA, USA.
  5. Sato, T., M. Yamada, T. Ogawa, K. Nakakita, Y. Hotta, M. Inayoshi. 1998. Combustion improvement for reducing exhaust emissions in IDI diesel engine. SAE 980503, SAE, Warrendale, PA, USA.