DOI QR코드

DOI QR Code

Effect of Al Alloy Composition on Physical and Crystallographical Properties of Plasma Electrolytic Oxidized Coatings II. Crystallographic Analysis of PEO Layer

플라즈마 전해 산화 코팅에 있어서 알루미늄 합금 모재 성분의 물리적, 결정학적 영향 II. PEO 층의 결정상 분석

  • Received : 2010.04.19
  • Accepted : 2010.05.25
  • Published : 2010.07.31

Abstract

Physical properties of Plasma electrolytic oxidized 8 different kinds of Al alloys, A-1100, A-2024, A-5052, A-6061, A-6063, A-7075, ACD-7B and ACD-12 were investigated. The electrolyte for PEO was $Na_2SiO_3$ and NaOH and some alkali earthen metal salts system solution. $\eta$-alumina, as well as $\gamma$-alumina, was main crystal phase, which were ever reported. Also, $Al_{4.95}Si_{1.05}O_{9.52}$ was found only in this research. So we can conclude that the process conditions of PEO apparatus and composition and concentration of its electrolyte affects crystal structure and physical properties of PEO layers much more than the compositions of Al alloy.

Keywords

References

  1. A.L. Yerokhin, X. Nie, A. Leyland, A. Matthews, and S.J. Dowey, “Plasma Electrolysis for Surface Engineering,” Surface and Coatings Technology, 122 73-93 (1999). https://doi.org/10.1016/S0257-8972(99)00441-7
  2. X. Nie, A. Leyland, H.W. Song, A.L. Yerokhin, S.J. Dowey, and A. Matthews, “Thickness Effects on the Mechanical Properties of Micro-arc Discharge Oxide Coatings on Aluminum Alloys,” Surface and Coatings Technology, 116-19 1055-60 (1999). https://doi.org/10.1016/S0257-8972(99)00089-4
  3. X. Nie, E.I. Meltis, J.C. Jiang, A. Leyland, A.L. Yerokin, and A. Matthews, “Abrasive Waer/corrosion Properties and TEM Analysis of $Al_{2}O_{3}$ Coatings Fabricated Using Plasma Electrolysis,” Surface and Coatings Technology, 149 245-51 (2002). https://doi.org/10.1016/S0257-8972(01)01453-0
  4. A.L. Yerokin, A. Shatrov, V. Samsonov, P. Shahkov, A. Pilkington, A. Leyland, and A. Matthews, “Oxide Ceramic Coatings on Aluminium Alloys Produced by a Pulsed Bipolar Plasma Electrolytic Oxidation Process,” Surface and Coatings Technology, 199 150-57 (2005). https://doi.org/10.1016/j.surfcoat.2004.10.147
  5. H. Kalkanci and S.C. Kurnaz, “The Effect of Process Parameters on Mullite-based Plasma Electrolytic Oxide Coatings,” Surface and Coatings Technology, 203 15-22 (2008). https://doi.org/10.1016/j.surfcoat.2008.07.015
  6. F.-Y. Jin, K. Wang, M. Zhu, L.-R. Shen, J. Li, H.-H. Hong, and P. K. Chu, “Infrared Reflection by Alumina Films Produced on Aluminum Alloy by Plasma Electrolytic Oxidation,” Materials Chem. and Phys., 114 398-401 (2009). https://doi.org/10.1016/j.matchemphys.2008.09.060
  7. Y.-J. Oh, J.-I. Mun, and J.-H. Kim, “Effect of Alloying Elements on Microstucture and Protective Properties of $Al_{2}O_{3}$ Coatings Formed on Aluminum Alloy Substrates by Plasma Electrolysis,” Surface and Coatings Technology, 204 141-48 (2009). https://doi.org/10.1016/j.surfcoat.2009.07.002
  8. G. Lv, W. Gu, H. Chen, W. Feng, M. L. Khosa, L. Li, E. Niu, G. Zhang, and S.-Z. Yang, “Characteristic of Ceramic Coatings on Aluminum by Plasma Electrolytic Oxidation in Silicate and Phosphate Electrolyte,” Applied Surface Science, 253 2947-52 (2006). https://doi.org/10.1016/j.apsusc.2006.06.036
  9. W. Xue, Z. Deng, R. Chen, T. Zhang, and H. Ma, “Microstructure and Properties of Ceramic Coatings Produced on 2024 Aluminum Alloy by Microarc Oxidation,” J. Materials Science, 36 2615-19 (2001). https://doi.org/10.1023/A:1017988024099
  10. J. Tian, Z. Luo, S. Qi, and X. Sun, “Structure and Antiwear Behavior of Micro-arc Oxidized Coatings on Alluminum Alloy,” Surface and Coatings Technology, 154 1-7 (2002). https://doi.org/10.1016/S0257-8972(01)01671-1
  11. E. Arslan, Y. Totik, E.E. Demirci, Y. Vangolu, A. Alsaran, and I. Efeoglu, “High Temperature Wear Behavior of Aluminum Oxide Layers by AC Micro Arc Oxidation,” Surface and Coatings Technology, 204 829-33 (2009). https://doi.org/10.1016/j.surfcoat.2009.09.057
  12. G. Sundararajan and L. Rama Krishna, “Mechanisms Underlying the Formation of Thick Alumina Coatings Through the MAO Coating Technology,” Surface and Coatings Technology, 167 269-77 (2003). https://doi.org/10.1016/S0257-8972(02)00918-0
  13. J.A. Curran and T.W. Clyne, “The Thermal Conductivity of Plasma Electrolytic Oxide Coatings on Aluminum and Magnesium,” Surface and Coatings Technology, 197 177-83 (2005). https://doi.org/10.1016/j.surfcoat.2005.01.039
  14. J.A. Curran and T.W. Clyne, “Thermo-physical Properties of Plasma Electrolytic Oxide Coatings on Aluminum,” Surface and Coatings Technology, 199 168-76 (2005). https://doi.org/10.1016/j.surfcoat.2004.09.037
  15. K. Wang, B.H. Koo, C.G. Lee, Y.J. Kim, S. Lee, and E. Byon, “Effects of Hybrid Voltages on Oxide Formation on 6061 Al-Alloys During Plasma Electrolytic Oxidation,” Chinese Journal of Aeronautics, 22 564-68 (2009). https://doi.org/10.1016/S1000-9361(08)60142-9
  16. K. Wang, B.H. Koo, C.G. Lee, Y.J. Kim, S. Lee, and E. Byon, “Effects of Electrolytes Variation on Formation of Oxide Layers of 6061 Al Alloys by Plasma Electrolytic Oxidation,” Trans. Nonferrous Met. Soc. China, 19 866-70 (2009). https://doi.org/10.1016/S1003-6326(08)60366-0
  17. J.A. Curran, H. Kalkanci, Yu. Magurova, and T.W. Clyne, “Mullite-rich Plasma Electrolytic Oxide Coatings for Thermal Barrier Applications,” Surface and Coatings Technology, 201 8683-87 (2007). https://doi.org/10.1016/j.surfcoat.2006.06.050
  18. W. Gu, G. Lv, H. Chen, G.-L. Chen, W.-R. Feng, and S.-Z. Yang, “Characterization of Ceramic Coatings Produced by Plasma Electrolytic Oxidation of Aluminum Alloy,” Materials Science and Engineering A, 447 158-62 (2007). https://doi.org/10.1016/j.msea.2006.09.004
  19. R.J. Damani and P. Makroczy, “Heat Treatment Induced Phase and Microstructural Development in Bulk Plasma Sprayed Alumina,” J. Euro. Ceram. Soc., 20 867-88 (2000). https://doi.org/10.1016/S0955-2219(99)00217-4
  20. T. Ban and K. Okada, “Structure Refinement of Mullite by the Rietveld Method and a New Method for Estimation of Chemical Composition,” J. Am. Ceram. Soc., 75 [1] 227-30 (1992). https://doi.org/10.1111/j.1151-2916.1992.tb05473.x
  21. I. Levin and D.G. Brandon, “Metastable Alumina Polymorph : Crystal Structures and Transition Sequences,” J. Am. Ceram. Soc., 81 1995-2012 (1998). https://doi.org/10.1111/j.1151-2916.1998.tb02581.x
  22. I. Levin, L.A. Bendersky, D.G. Brandon, and M. Rhle, “Cubic to Monoclinic Phase Transformations in Alumina,” Acta. Mater., 45 [9] 3659-69 (1997). https://doi.org/10.1016/S1359-6454(97)00040-2
  23. B.-Y. Kim, D.Y. Lee, Y.-N. Kim, M.-S. Jeon, J.K. Song, S.Y. Kim, and K.Y. Kim, “Effect of Al Alloy Composition on Physical and Crystallographical Properties of Plasma Electrolytic Oxidized Coatings. I. Physical Properties of PEO Layer(in Korean),” J. Kor. Ceram. Soc., 47 [3] 256-261 (2010). https://doi.org/10.4191/KCERS.2010.47.3.256

Cited by

  1. Photodegradation of organic dyes over nickel distributed CNT/TiO2 composite synthesized by a simple sol-gel method vol.29, pp.2, 2011, https://doi.org/10.2478/s13536-011-0023-7
  2. Effect of process conditions on crystal structure of Al PEO coating. I. Unipolar pulse and coating time vol.24, pp.2, 2014, https://doi.org/10.6111/JKCGCT.2014.24.2.059