DOI QR코드

DOI QR Code

Deformation Characteristics of Subgrade Materials and Soil at Abutment

노상토 및 보조기층 재료의 변형특성

  • 송창섭 (충북대학교 지역건설공학과) ;
  • 임성윤 (한국도로공사 도로교통연구원 지반팀)
  • Received : 2010.04.07
  • Accepted : 2010.05.12
  • Published : 2010.05.31

Abstract

It is very important to select carefully backfill materials and build for the structural integrity of abutment in bridge. In general, backfill materials of unbound crushed stones (SB-1) are used to provide the safety of abutment structure and to reduce differential settlement around abutment that is significantly related with performance of road pavement under working conditions. In this study, to evaluate the compatibility of backfill materials at abutment and to develop the abutment design program, i) basic properties of subgrade soils in Korea, ii) evaluation of deformational characteristics of backfill materials from RC/TS tests, cyclic TX tests and Creep tests were accomplished.

Keywords

References

  1. Ministry of Construction and Transportation, 2002. Korea pavement research program, KPRP-G-02,
  2. Ministry of Construction and Transportation, 2000. Road design manual.
  3. Lee, K. H., 1997. Development of alternative MR testing methods for subgrade and sub-base materials, Korea expressway corporation.
  4. AASHTO, 1986. AASHTO Guide for Design of Pavement Structure, AASHTO, Washington, D.C. 1986
  5. AASHTO, 1992. Resilient Modulus of Unbounded Granular Base/Subbase Materials and Subgrade Soils-SHRP Protocol P-46 AASHTO, T-294-92I, AASHTO, Washington D.C..
  6. AASHTO, 1993. AASHTO Guide for Design of Pavement Structure, AASHTO, Washington, D.C..
  7. Duncan, J. M., Clough, G. W. and Ebeling, R. M., 1990. Behavior and Design of Gravity Earth Retaining Structures, Proceedings of the Conference on Design and Performance of Earth Retaining Structures, ASCE Geotechnical Special Publication 25: 251-277 (New York).
  8. Filz, G. M. and Duncan, J. M., 1992. An experimental and analytical study of earth loads on rigid retaining walls, Geotechnical Engineering Division, Department of Civil Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia.
  9. Gomez, J. E., 2000. Development of an extended hyperbolic model for concrete-to-soil Interfaces, Ph. D. Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, Virginia.
  10. Kim, D. S., and K, K. C., 1996. A reliable resilient modulus testing technique on subgrade soils. Journal of the Korean Society of civil Engineers 16: 81-91 (in Korean).
  11. Kim, D. S., and C, Y. O., 2001. Dynamic deformation characteristics of cohesionless soils in Korea using resonant column tests. Journal of the Korean Geotechnical Society 17: 115-128 (in Korean).
  12. Reeves, J. N. and Filz, G. M., 2000. Earth force reduction by a synthetic compressible inclusion, A Report of Virginia's Center for Innovative Technology.
  13. Sehn, A. L., and Duncan, J. M., 1990. Experimental study of earth pressures on retaining structures, Geotechnical Engineering Division, Department of Civil Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia.
  14. Su, W., 1989. Static strength evaluation of cohesionless soil with oversize oarticles, Ph.D Dissertation, Washington State University.
  15. Sun, C. W., 1993. Stiffness and damping from the frequency response of a free-free specimen, Master's Thesis GT93-8, The University of Texas at Austin.
  16. Vaghela, J. G. and Stokoe II, K. H., 1995. Smallstrain dynamic properties of dry sand from the freefree resonant column, Geotechnical Engineering Report GT95-1, Geotechnical Engineering Center, University of Texas at Austin.