Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Design of a Test bed and Performance Evaluation for a Hovering Type Autonomous Underwater Vehicle under Open Control Platform

개방형 제어 플랫폼 기반 호버링형 무인잠수정 테스트베드 설계 및 성능평가

  • Received : 2009.04.30
  • Accepted : 2010.03.19
  • Published : 2010.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the design of hardware platform, which is a test bed for the navigation system and hovering type AUV (Autonomous Underwater Vehicle) under the OCP (Open Control Platform). The developed AUV test bed consists of two hulls, four thrusters, and the navigation system which uses a SBC2440II with IMU (Inertial Measurement Unit). And the SMC (Sliding Mode Control) is chosen for the diving and steering control of the AUV. This paper uses ACE/TAO RTEC (Real-Time Event Channel) as a middleware platform in order to control and communicate in the developed AUV test bed. In this paper, two computers are used and each of them is dedicated for the specific purpose, the first computer is used as the SMC module and the middleware platform for the ACE/TAO RTEC and the second computer is used for the sensor controller. We analyze the performance of the AUV test bed under the OCP.

Keywords

References

  1. T. Samad, and G. Balas, Software-Enabled Control: Information Technology for Dynamic Systems, NJ, Wiley IEEE Press, Piscataway, 2003.
  2. L. Wills, S. Kannan, S. Sander, M. Guler, B. Heck, J. V. R. Prasad, D. Schrage, and G. Vachtsevanos, “An open platform for reconfigurable control,” IEEE Control Systems Magazine, June 2001.
  3. K. D. Young, and Umit Ozgiiner, “Sliding mode: control engineering in practice,” Proceedings of the American Control Conference, San Diego, California June 1999.
  4. E. H. Binugroho, T. K. Ha, J. W. Choi, and N. G. Ko, “Modeling of hovering AUV test bed and design of ACE/TAO RTES-based open control platform,” Proceedings of the Nineteenth (2009) International Offshore (Ocean) and Polar Engineering Conference (ISOPE'09), Osaka International Convention Center, Osaka, Japan, pp. 644-650, June 2009.
  5. C. D. Gill, David L. Levine, and D. C. Schmidt, “The design and performance of a real-time CORBA scheduling service,” Journal of Real-Time System, Springer Netherlands, vol. 20, no. 2, March 2001.
  6. D. C. Schmidt, and S. Vinoski, “Object interconnections,” The OMG Events Service, Column 9, February 1997.
  7. D. C. Schmidt and C. O’Ryan, “Patterns and performance of distributed real-time and embedded publisher/subscriber architectures,” Journal of Systems and Software, Elsevier Science Inc., vol. 66, no. 3, pp. 213-223, June 2003. https://doi.org/10.1016/S0164-1212(02)00078-X
  8. H. M. Huang, and C. D. Gill, “Design and performance of a fault-tolerant real-time CORBA event service,” Proceedings of the 18th Euromicro Conference on Real-Time Systems, 2006.
  9. T. I. Fossen, Guidance and Control of Ocean Vehicle, John Wiley & Sons, 1994.
  10. J. Yuh, “Modeling and control of underwater robot vehicles,” IEEE Transactions on Systems, Man and Cybernetics, vol. 20, pp. 1475-1483, 1990. https://doi.org/10.1109/21.61218
  11. 양승윤, 이만형, “수중운동체의 조종제어기 설계 연구,” 대한기계학회논문집(A), 제20권 제3호, pp. 850-860, 1996.
  12. http://www.mathworks.co.kr/support/compilers/interface. html.