DOI QR코드

DOI QR Code

간접분사식 압축착화기관에서 BD 혼합율과 연료분사시기에 따른 기관성능 및 배기배출물 특성 연구

A Study on Engine Performance and Exhaust Emissions for Biodiesel Blending Ratios and Fuel Injection Timing in an Indirect Injection Compression Ignition Engine

  • Choi, Seung-Hun (The Research Center of Industrial Technology, Dept. of mechanical Engineering, Chonbuk National University) ;
  • Oh, Young-Taig (The Research Center of Industrial Technology, Dept. of mechanical Engineering, Chonbuk National University)
  • 투고 : 2010.07.20
  • 심사 : 2010.08.16
  • 발행 : 2010.08.25

초록

Biodiesel (BD) can be effectively used as an alternative fuel in diesel engines. However, BD may affect the performance and exhaust emissions in diesel engines because it has different physical and chemical properties from diesel fuel such as viscosity, compressibility and so on. To investigate the effect of injection timing on the characteristics of engine performance and exhaust emissions with BD in an indirect injection diesel engine, BD derived from soybean oil was applied in this study. The engine was operated at six different injection timings from TDC to BTDC $12^{\circ}CA$ and five loads at various engine speeds. Below BD 30, there's similar trend compared with diesel fuel. But, the best injection timing was $4{\sim}6^{\circ}CA$ retarded compare with diesel fuel using BD 30. When the fuel injection timing was retarded, better results were showed, which may confirm by advantages of BD.

키워드

참고문헌

  1. Cenk, S. and M. Canakci. 2009. Effects of injection timing on the engine performance and exhaust emissions of a duel-fuel diesel engine. Energy Conversion and Management 50:203-213. https://doi.org/10.1016/j.enconman.2008.06.007
  2. Chang, D. Y. and J. H. V. Gerpan. 1998. Determination of particulate and unburned hydrocarbon emissions from Diesel engines fueled bio-diesel. SAE Paper No.982527. Warrendale, pennsylvania, USA.
  3. Choi, S. H. and Y. T. Oh. 2006. Combustion characteristics of esterified rice bran oil as an alternative fuel in a diesel engine. International Journal of Automotive Technology 7(4):399-406.
  4. Choi, S. H., Y. T. Oh and G. H. Kim. 2007. Characteristics of durability and emission with biodiesel fuel (5%) in a common rail direct injection diesel engine at SEOUL-10 mode. Journal of Biosystems Engineering 32(2):97-101. https://doi.org/10.5307/JBE.2007.32.2.097
  5. Kim, Y. J., Y. K. Kang, K. C. Kang and Y. S. Ryou. 2008. Facilities for bio-production and environmental engineering ; fuel qualities of different biodiesels in the gun type burner. Journal of Biosystems Engineering 33(2):124-129. https://doi.org/10.5307/JBE.2008.33.2.124
  6. Monyen, A., J. H. V. Gerpen and M. Canakci. 2001. Effect of timing and oxidation on emissions from biodiesel-fueled engines. Transactions of the ASAE 44(1):35-42. https://doi.org/10.13031/2013.2301
  7. Rubino, L. 1999. The Effect of Oxygenated Additives on Soot Precursor Formation in a Counterflow Diffusion Flame. SAE Paper No. 993589, Warrendale, Pennsylvania, USA.
  8. Szybist, J. P. and A. L. Boehman. 2003. Behavior of a diesel injection system with biodiesel fuel. SAE Paper No. 2003-01-1039. Warrendale, pennsylvania, USA.

피인용 문헌

  1. Viscosity Characteristics of Waste Cooking Oil with Ultrasonic Energy Irradiation vol.37, pp.6, 2012, https://doi.org/10.5307/JBE.2012.37.6.429