Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A study on the Character of Brush Deburring Grinding System

브러시 디버링 연삭 시스템 특성에 관한 연구

  • 신관수 (인천대학교 기계시스템공학부)
  • Received : 2010.04.01
  • Accepted : 2010.06.07
  • Published : 2010.06.15
Download PDF
⟨ Previous Next ⟩

Abstract

Due to the increasing demand for carious methodologies to improve the quality of products were introduced. A Brush the most frequently used type of grinding process is one of the deburring. in order to produce consistent burr shape, various machining conditions have been combined and applied to disk grinding process. Between the workpiece and the grinding disc to earn depends on the angle of the slope has been observed. Drastic increase of tool wear has been also observed along the inclination angle variation. Various burr shapes have been captured and analyzed using image processing technique.

Keywords

References

  1. Park, D. S., Han, J. Y., Seong, E. J. and Han, I. Y., 2006, "Deburring of the Inner Edge in Intersection Hole by Powder Blasting," Proceedings of the KSMPE spring Conference in 2006, pp. 44-49
  2. Choi, G. J., Kim, Y. W., Shin, S. W. and Ahn, D. S., 1998, "Deburring of Irregular Burr using Vision and Force Sensors," Journal of the KSPSE, Vol. 2, No. 3, pp. 83-88
  3. Won, J. Y., Choi, Y. J., Lee, S. Y. and Choi, H. J., 2003, "Deburring Technology Using Ultrasonic Cavitation," Proceedings of the KSME fall Conference in 2003, pp. 1798-1803
  4. Shin, S. W., Gal, C. S. and Ahn, D. S., 1996, "A Study on the Automation of Deburring Process Using Expert's Skills," Proceedings of the KSPE fall Conference in 1996, pp. 685-688
  5. Bae, J. Y., Joo, Y. M., Kim, J. U. and Lee, S. R., 2002, "A Development of Deburring System using Vision Sensor," Proceedings of the KSME spring Conference in 2002, pp. 900-904
  6. Park, K. T. and Choi, J. W., 1994, "Intelligent Robot System for Deburring," Proceedings of the KSPE spring Conference in 1994, pp. 371-376
  7. Shin. K. S., 2001, A study on the Analysis and Optimization of Brush Grinding Process, A Thesis for a Doctorate, Kyung Hee University, Republic of Korea.