DOI QR코드

DOI QR Code

Satistical Analysis of SiO2 Contact Hole Etching in a Magnetically Enhanced Reactive Ion Etching Reactor

  • Liu, Chunli (Department of Physics, Hankuk University of Foreign Studies) ;
  • Shrauner, B. (Department of Electrical and Systems Engineering, Washington University)
  • Received : 2010.07.06
  • Accepted : 2010.08.31
  • Published : 2010.09.30

Abstract

Plasma etching of $SiO_2$ contact holes was statistically analyzed by a fractional factorial experimental design. The analysis revealed the dependence of the etch rate and DC self-bias voltage on the input factors of the magnetically enhanced reactive ion etching reactor, including gas pressure, magnetic field, and the gas flow rates of $CHF_3$, $CF_4$, and Ar. Empirical models of the DC self-bias voltage and etch rate were obtained. The DC self-bias voltage was found to be determined mainly by the operating pressure and the magnetic field, and the etch rate was related mainly to the pressure and the flow rates of Ar and $CHF_3$.

Keywords

References

  1. B. Wu, J. Vac. Sci. Technol. B 24, 1 (2006). https://doi.org/10.1116/1.2162580
  2. B. Jinnai, T. Orita, M. Konishi et al. J. Vac. Sci. Technol. B 25, 1808 (2007). https://doi.org/10.1116/1.2794050
  3. M. A. Lieberman, A. J. Lichtenberg, and S. E. Savas, IEEE Trans. Plasma Sci. 19, 189 (1991). https://doi.org/10.1109/27.106813
  4. J. C. Park and B. K. Kang, IEEE Trans. Plasma Sci. 25, 499 (1997). https://doi.org/10.1109/27.597265
  5. S. J. You, S. K. Ahn, and H. Y. Chang, Surf. Coat. Tech. 193, 81 (2005). https://doi.org/10.1016/j.surfcoat.2004.07.054
  6. S. H. Lee, S. J. You, H. Y. Chang, and J. K. Lee, J. Vac. Sci. Technol. A 25, 455 (2007). https://doi.org/10.1116/1.2713408
  7. G. S. May, J. Huang, and C. J. Spanos, IEEE Trans. Semicond. Manuf. 4, 83 (1991). https://doi.org/10.1109/66.79720
  8. M. J. Buie, J. T. Pender, and P. L. G. Ventzek, Jpn. J. Appl. Phys. Part 1 36, 4838 (1997). https://doi.org/10.1143/JJAP.36.4838
  9. P. E. Riley, V. D. Kulkarni, and S. H. Bishop, J. Vac. Sci. Technol. B 7, 24 (1989). https://doi.org/10.1116/1.584441
  10. A. Camacho and D. V. Morgan, J. Vac. Sci. Technol. B 12, 2933 (1994). https://doi.org/10.1116/1.587539
  11. B. Kim and K. H. Kwon, J. Appl. Phys. 93, 76 (2003). https://doi.org/10.1063/1.1527216
  12. W. Guo and H. H. Sawin, J. Phys. D-Appl. Phys. 42, 194014 (2009). https://doi.org/10.1088/0022-3727/42/19/194014
  13. G. E. P. Box, W. G. Hunter, and J. S. Hunter, Statistics for Experimenters: An Introduction to Design, Data Analysis, and Model Building, John Wiley & Sons, New York (1978).
  14. S. Nakagawa, T. Sasaki, H. Mori, and T. Namura, Jpn. J. Appl. Phys. Part 1 33, 2194 (1994). https://doi.org/10.1143/JJAP.33.2194
  15. H. C. Shin, K. Noguchi, X. Y. Qian, N. Jha, G. Hills, and C. Hu, IEEE Electron Device Lett. 14, 88 (1993). https://doi.org/10.1109/55.215117
  16. Y. Li, A. Iizuka, and N. Sato, Phys. Rev. B 132, 585 (1997).
  17. M. J. Buie, J. T. P. Pender, and M. Dahimene. J. Vac. Sci. Technol. A 16, 1464. (1998). https://doi.org/10.1116/1.581170
  18. R. Lindley, C. Bjorkman, H. Shan et al. Solid State Technol. 40, 93 (1997). https://doi.org/10.1016/0038-1101(95)00220-0
  19. S. J. You, C. W. Chung, K. H. Bai, and H. Y. Chang, Appl. Phys. Lett. 81, 2529 (2002). https://doi.org/10.1063/1.1506944
  20. M. A. Lieberman and A. Lichtenberg. Principles of Plasma Discharges and Materials Processing, John Wiley & Sons, New York (1994).
  21. G. Y. Yeom and M. Kushner, Appl. Phys. Lett. 56, 857 (1990). https://doi.org/10.1063/1.103322
  22. A. Furuya and S. Hirono, J. Appl. Phys. 68, 304 (1990). https://doi.org/10.1063/1.347133
  23. A. Furuya and S. Hirono, J. Appl. Phys. 87, 939 (2000). https://doi.org/10.1063/1.371963
  24. A. J. Van Roosmalen, W. G. M. Van den Hoek, and H. Kalter, J. Appl. Phys. 58, 653 (1985). https://doi.org/10.1063/1.336177
  25. A. Seabaugh. J. Vac. Sci. Technol. B 6, 77 (1988). https://doi.org/10.1116/1.584056
  26. M. V. Bazylenko and M. Gross, J. Vac. Sci. Technol. A 14, 2994 (1996). https://doi.org/10.1116/1.580258
  27. D. L. Flamm, in Plasma Etching, An Introduction, edited by D. M. Manos and D. L. Flamm, Academic Press, Boston (1989).