DOI QR코드

DOI QR Code

An Effect of Fe2O3 Additive on a Seebeck Coefficient and a Power Factor for SmCoO3 Perovskite System

SmCoO3 페롭스카이트 계 열전소재에서 Fe2O3 첨가제가 출력인자에 미치는 영향

  • Jung, Kwang-Hee (Energy Materials Center, Green Ceramics Divsion., Korea Institute of Ceramic Engineering and Technology (KICET)) ;
  • Choi, Soon-Mok (Energy Materials Center, Green Ceramics Divsion., Korea Institute of Ceramic Engineering and Technology (KICET)) ;
  • Seo, Won-Seon (Energy Materials Center, Green Ceramics Divsion., Korea Institute of Ceramic Engineering and Technology (KICET)) ;
  • Park, Hyung-Ho (Department of Materials Science and Engineering, Yonsei University)
  • 정광희 (한국세라믹기술원 그린세라믹본부) ;
  • 최순목 (한국세라믹기술원 그린세라믹본부) ;
  • 서원선 (한국세라믹기술원 그린세라믹본부) ;
  • 박형호 (연세대학교 신소재공학과)
  • Received : 2010.05.31
  • Accepted : 2010.07.28
  • Published : 2010.09.30

Abstract

$SmCoO_3$ system was investigated for their application to themoelectric materials. All specimens showed p-type semiconducting behavior and their electrical conductivity ($\sigma$), Seebeck coefficient (S) and power factor were measured at high temperature. And the effect of dopant ions on their thermoelectrical properties were also investigated. $Fe^{3+}$ ion doped into $Co^{3+}$ site enhanced the Seebeck coefficient and decreased the electrical conductivity simultaneously. The maximum Seebeck coefficient value for 60% doping case reached to 780 ${\mu}V$/K at $240^{\circ}C$. However $Fe^{3+}$ doped system cause an negative effect on power factor value. In case of the pure phase, the maximum Seebeck coefficient value reached to 290 ${\mu}V$/K at $240^{\circ}C$ and the maximum electrical conductivity was obtained 748 1/(ohm$\times$cm) at $960^{\circ}C$. As a result, the maximum power factor was obtained $1.49\times10^{-4}$ W/$mK^2$ at $550^{\circ}C$.

Keywords

References

  1. K. Fujita, T. Mochida, and K. Nakamura, "High-Temperature Thermoelectric Properties of $NaxCoO_{2-\delta}$ Single Cyrstals," Jpn. J. Appl. Phys., 40 4644-47 (2001). https://doi.org/10.1143/JJAP.40.4644
  2. R. Funahashi, I. Matsubara, H. Ikuta, T. Takeuchi, U. Mizutani, and S. Sodeoka, "An Oxide Single Crystal with High Thermoelectric Performance in Air," Jpn. J. Appl. Phys., 39 L1127-L29 (2000). https://doi.org/10.1143/JJAP.39.L1127
  3. R. Koc and H. U. Anderson, "Electrical Conductivity and Seebeck Coefficient of (La, Ca) (Cr, Co)$O_3$," J. Mater. Sci., 27 5477-82 (1992). https://doi.org/10.1007/BF00541609
  4. Y. Miyazaki, "Crystal Structure and Thermoelectric Properties of the Misfit-layered Cobalt Oxides," Solid State Ionics., 172 463-67 (2004). https://doi.org/10.1016/j.ssi.2004.01.046
  5. R. D. Shannon, "Revised Effective Ionic Radii and Systematic Studies of Interatomie Distances in Halides and Chaleogenides," Acta Cryst., A32 751-67 (1976).
  6. Joseph P. Heremans, V. Jovovic, Eric S. Toberer, A. Saramat, K. Kurosaki, A. Charoenphakdee, S. Yamanaka, and G. Jeffrey Snyder, "Enhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States," Science, 321 554-57 (2008). https://doi.org/10.1126/science.1159725
  7. Q. Yao, D. L. Wang, L. D. Chen, X. Shi, and M. Zhou, "Effects of Partial Substitution of Transition Metals for Cobalt on the High-temperature Thermoelectric Properties of $Ca_3Co_4O_{9+\delta}$," J. Appl. Phys., 97 103905 (2005). https://doi.org/10.1063/1.1898443
  8. L. Sudheendra, A. R. Raju, and C. N. Rao, "A Systematic Study of Four Series of Electron-doped Rare Earth Manganates, $Ln_xCa_{1-x}MnO_3$ (Ln = La, Nd, Gd and Y) Over the x = 0.02–0.25 Composition Range," J. Phys.: Condens. Matter, 15 895-905 (2003).
  9. Y. Liu, Y. Lin, Z. Shi, and C.-W. Nanw, "Preparation of $Ca_3Co_4O_9$ and Improvement of its Thermoelectric Properties by Spark Plasma Sintering," J. Am. Ceram. Soc., 88 [5] 1337-40 (2005). https://doi.org/10.1111/j.1551-2916.2005.00284.x