Parametric Study on Water Mist Nozzles for Fire Suppression System Based on CFD Methods

  • Jung, In-Su (Dept. of Mechanical Engineering, Gyeongsang National University) ;
  • Park, Tae-Gyu (Dept. of Mechanical Engineering, Gyeongsang National University) ;
  • Chung, Hee-Taeg (Dept. of Mechanical Engineering, Gyeongsang National University)
  • 투고 : 2010.08.02
  • 심사 : 2010.09.27
  • 발행 : 2010.09.30

초록

Numerical simulation has been performed to investigate the mist flow characteristics through the fire suppression nozzles for the design purposes. The commercial softwares, FLUENT and the fire dynamic simulator, FDS with the proper modelings were chosen as the numerical tools. In order to find optimal conditions in sense of the main performances of nozzles, the spray characteristics were analyzed both inside and outside of the nozzles. Geometric factors of the injecting orifices, i.e., diameter and chamfered angle were chosen as the simulation parameters for design application. From the present numerical results, 1.0c nozzles, whose orifice-diameter was 1 mm, having the chamfered angles were shown as the best performance of the fire suppression.

키워드

참고문헌

  1. M. B. Kim, "A State of the Art for Water Mist Fire Protection Systems and Introduction of NFPA 750", J. Korean Inst. of Fire Science & Eng., Vol. 1, No. 2, 2000, pp. 2-5.
  2. G. Tanner and K. F. Knasiak, "Spray Characterization of Typical Fire Suppression Nozzles", 3rd Int. Water Mist Conf. Madrid, 2003.
  3. C. Kim, et al., "Effect of Spray Angle of Water Mist Nozzle on Temperature Field of Compartment Fire", Proc. KSME Spring Meetings, 2003, pp. 1703-1708.
  4. C. Lee, et al, "CFD Simulation of Flow Fields for Water Mist Fire Suppression System Using FLUENT", J. Engineering Research Inst. (at GSNU), Vol. 21, 2005, pp. 199-204.
  5. K. Y. Bae, et al., "Performance Prediction of Water Mist Fire Suppression Mechanism for Shipboard Enclosure Using CFD Methods", The 12th Asian Congress of Fluid Mechanics, Daejeon, Korea, 2008.
  6. I. S. Jung, et al., "Performance Prediction of Water Mist Nozzles for Fire Suppression System of Ship Buildings Using CFD Methods", The 7th JSME-KSME Thermal and Fluids Engineering Conference, Sapporo, Hokkaido, Japan, 2008.
  7. FLUENT Inc., "Fluent 6 User's Guide", Fluent Inc. Lebanon, 2001.
  8. S. A. Morsi, and A. J. Alexander, "An Investigation of Particle Trajectories in Two-Phase Flow Systems", J. Fluid Mechanics, Vol. 55(part2), 1972, pp. 193-208. https://doi.org/10.1017/S0022112072001806
  9. NIST, "Fire Dynamic Simulator, Technical Reference Guide", NIST, U.S.A., 2000.
  10. C. H. Lee, H. T. Chung, B. Y. Choi and C. H. Kim, "Application of CFD Technique to Optimal Design of Water-Mist Fire Suppression Nozzles", 2nd YSRIM Conference, Sanghai, China, 2007.
  11. I. S. Jung, et al., "Numerical Simulation of Flow Characteristics around the Water-Mist Injecting Nozzle", The third international symposium on mechanics, aerospace and informatics engineering 2009, Meiji University and Gyeongsang National University, 2009, pp. 315-319.