DOI QR코드

DOI QR Code

An Experimental Study on the Flame Appearance and Heat Transfer Characteristics of Acoustically Excited Impinging Inverse Diffusion Flames

음향 가진된 충돌 역 확산화염의 화염형상과 열전달 특성에 관한 실험적 연구

  • Kang, Ki-Joong (School of Mechanical and Aerospace Engineering, Sunchon National Univ.) ;
  • Lee, Kee-Man (School of Mechanical and Aerospace Engineering, Sunchon National Univ.)
  • 강기중 (순천대학교 기계우주항공공학부) ;
  • 이기만 (순천대학교 기계우주항공공학부)
  • Received : 2010.08.13
  • Accepted : 2010.10.15
  • Published : 2010.10.31

Abstract

An experimental investigation of the flame appearance and heat transfer characteristics in both unexcited and excited impinging inverse diffusion flames with a loud speaker has been performed. The flame is found to become broader and shorter (in length) with acoustic excitation. The heat flux at the stagnation point is increased with the acoustic excitation. The acoustic excitation is more effective in lean conditions than in rich conditions. The reasons for these behaviors are that acoustic excitation improves the entrainment of surrounding air into the jet. From this study, it is found that the maximum increase of 57% in the total heat flux is obtained at the stagnation point of $\Phi$=0.8. Therefore, it is ascertained that the excitation combustion can be adopted with effective instruments as a method for improving heat transfer in impinging jet flames.

본 오디오 스피커로 음향 가진과 비가진 된 충돌 역 확산화염에서 화염의 형상과 열전달 특성에 관한 실험적 연구를 수행하였다. 가진에 의해 화염은 반응대가 넓어지고 화염 길이는 좀 더 짧아지는 경향을 보이며 충돌판의 정체점에서 열전달 성능인 열유속은 가진에 의해 향상되는 것으로 나타났다. 이러한 가진 효과는 당량비가 높은 과농한 상태 보다 상대적으로 낮은 혼합 상태에서 효과적으로 영향을 미치는 것으로 파악되는데 이는 가진에 의해 주위산화제가 연료 분류로의 유입이 향상되어 나타나는 것으로 판단된다. 이러한 현상으로 본 연구에서는 당량비가 0.8인 경우 정체점에서 총 열유속이 최대 57% 증가되는 것으로 나타났다. 따라서 본 연구를 통해 가진 연소가 충돌 분류 화염에서 열전달 성능을 향상시키는데 효과적인 방법임을 확인하게 되었다.

Keywords

References

  1. C.S Cheung, C.W. Leung and L.L. Dong, "Heat transfer characteristics of an impinging inverse diffusion flame jet-part 1:free flame structure", International journal of heat and mass transfer, Vol. 50, pp. 5108-5123, 2007. https://doi.org/10.1016/j.ijheatmasstransfer.2007.07.018
  2. C.S Cheung, C.W. Leung and L.L. Dong, "Heat transfer characteristics of an impinging inverse diffusion flame jet-part 2:impinging flame structure and impingement heat transfer", International journal of heat and mass transfer, Vol. 50, pp. 5124-5138, 2007. https://doi.org/10.1016/j.ijheatmasstransfer.2007.07.017
  3. Tianshu Liu and J.P. Sullivan, "Heat Transfer and Flow Structures in an Excited Circular Impinging Jet", Int. J. Heat and Mass Transfer, Vol. 39, No. 17, pp. 3695-3706, 1996. https://doi.org/10.1016/0017-9310(96)00027-0
  4. S.D. Hwang and H.H. Cho, "Effects of Acoustic Excitation Positions on Heat Transfer and Flow in Axisymmetric Impinging Jet : Main Jet Excitation and Shear Layer Excitation", Int. J. of Heat and Mass Fluid Flow, Vol. 24, pp. 199-209, 2003. https://doi.org/10.1016/S0142-727X(02)00236-9
  5. P.A. Eibeck, J.O. Keller, T.T. Bramlette and D.J. Sailor, "Pulse Combustion: Impinging Jet Heat Transfer Enhancement", Combustion Science and Technology, Vol. 94, pp. 147-165, 1993. https://doi.org/10.1080/00102209308935308
  6. H. M. Hofmann, D.L. Movileanu, M. Kind and H. Martin, "Influence of a Pulsation on Heat Transfer and Flow Structure in Submerged Impinging Jets", Int. J. Heat and Mass Transfer, Vol. 50, pp. 3638-3648, 2007. https://doi.org/10.1016/j.ijheatmasstransfer.2007.02.001
  7. Kee-Man Lee, "A Visual Study on the turnabout Phenomenon of Vortex Roll-up in forced Jet Diffusion Flames", Journal of Mechanical Science and Technology, Vol. 21, pp. 2221-2228, 2007. https://doi.org/10.1007/BF03177483
  8. C.H. Hwang, K.M. Lee and S.M. Kum, "NOx Formation Characteristics on Heat Loss Rate for CH4/Air Premixed Flames in a Perfectly Stirred Reactor", Journal of the Korea Academia Industrial Cooperation Society, Vol. 7, pp. 1465-1472, 2009. https://doi.org/10.5762/KAIS.2009.10.7.1465