DOI QR코드

DOI QR Code

Characterization of superhydrophilic thin films fabricated by a layer-bylayer self-assembly method

교호흡착법에 의해 제조된 초친수 박막 특성

  • Kim, Jin-Ho (Korea Institute of Ceramic Engineering and Technology, Electronic & Optic Material Center) ;
  • Hwang, Jong-Hee (Korea Institute of Ceramic Engineering and Technology, Electronic & Optic Material Center) ;
  • Lim, Tae-Young (Korea Institute of Ceramic Engineering and Technology, Electronic & Optic Material Center) ;
  • Jang, Jang-Hoon (Department of Ceramic Engineering, Gangneung-Wonju National University) ;
  • Kim, Sae-Hoon (Department of Ceramic Engineering, Gangneung-Wonju National University)
  • 김진호 (한국세라믹기술원 전자.광소재센터) ;
  • 황종희 (한국세라믹기술원 전자.광소재센터) ;
  • 임태영 (한국세라믹기술원 전자.광소재센터) ;
  • 장장훈 (강릉원주대학교 세라믹공학과) ;
  • 김세훈 (강릉원주대학교 세라믹공학과)
  • Received : 2010.06.17
  • Accepted : 2010.07.30
  • Published : 2010.08.31

Abstract

Superhydrophilic thin film consisted of positively charged poly (allylamine hydrochloride) (PAH) and negatively charged poly (acrylic acid) (PAA) was fabricated by a layer-by-layer (LBL) self-assembly. Glutaraldehyde (GA) was used in order to increase an adhesion hardness by amine-aldehyde reaction. The surface morphology, thickness, transmittance, water contact angle and adhesion hardness of PAH/PAA thin film with or without GA were measured. The adhesion hardness of PAH/PAA thin film with GA deposition increased over 2 times although the film thickness of PAH/GA/PAA decreased than that of PAH/PAA thin film. The increase of adhesion hardness by amine-aldehyde reaction between PAH and GA was measured by fourier transform infrared (FT-IR) spectroscopy. Fabricated PAH/PAA and PAH/GA/PAA thin films showed water contact angel under $5^{\circ}$ and high transmittance over 91.3% at 550 nm.

양전하를 갖는 poly(allylamine hydrochloride)(PAH)와 음전하를 갖는 poly(acrylic acid)(PAA) 전해질 폴리머를 사용하여 layer-by-layer(LBL) self-assembly 방법에 의해 초친수 특성을 갖는 박막을 제조하였다. PAH/PAA 박막의 밀착강도를 증가시키기 위하여 glutaraldehyde(GA) 수용액을 이용하여 amine-aldehyde의 화학반응에 따른 박막의 표면구조 변화, 막두께, 투과율, 접촉각, 밀착강도 특성을 측정하였다. PAH와 PAA 용액 침적 사이에 기판을 GA 수용액에 침적함으로써 박막의 두께는 감소하였지만 밀착강도는 2배 이상 증가하였다. 밀착강도의 증가는 PAH 와 GA의 amine-aldehyde의 화학반응에 의한 결과라는 것을 fourier transform infrared(FT-IR) spectroscopy를 사용하여 확인하였다. 제조된 PAH/PAA and PAH/GA/PAA 박막은 물 접촉각 $5^{\circ}$이하의 초친수 박막 특성을 보여주었고, 550 nm 파장에서 91.3% 이상의 높은 투과율을 나타내었다.

Keywords

References

  1. W. Zhao, J.J. Xu and H.Y. Chen, "Electrochemical biosensors based on layer-by-layer assemblies", Electroanalysis 18 (2006) 1737. https://doi.org/10.1002/elan.200603630
  2. F. Caruso, R.A. Caruso and H. Mohwald, "Nanoengineering of inorganic and hybrid hollow spheres by colloidal templating", Science 282 (1998) 1111. https://doi.org/10.1126/science.282.5391.1111
  3. S.C. Olugebefola, W.A. Kuhlman, M.F. Rubner and A.M. Mayes, "Photopatterned nanoporosity in polyelectrolyte multilayer films", Langmuir 24 (2008) 5172. https://doi.org/10.1021/la703936p
  4. I. Lee, J.S. Ahn and T.R. Hendricks, M.F. Rubner and P.T. Hammond, "Patterned anc controlled polyelectrolyte fractal growth and aggregations", Langmuir 20 (2004) 2478. https://doi.org/10.1021/la035805+
  5. J.L. Stair, J.J. Harris and M.L. Bruening, "Enhancement of the ion-transport selectivity of layered polyelectrolyte membranes through cross-linking and hybridization", Chem. Mater. 13 (2001) 2641. https://doi.org/10.1021/cm010166e
  6. C.S. Peyratout and L. Daehne, "Tailor-made polyelectrolyte microcapsules: from multilayers to smart containers", Angew. Chem., Int. Ed. 43 (2004) 3762. https://doi.org/10.1002/anie.200300568
  7. Y. Liu, A. Wang and R. Claus, "Molecular self-assembly of $TiO_2$/polymer nanocomposite films", J. Phys. Chem. B 101 (1997) 1385. https://doi.org/10.1021/jp962591e
  8. J. Hiller, J.D. Mendelsohn and M.F. Rubner, "Reversibly erasable nanoporous anti-reflection coatings from polyelectrolyte multilayers", Nature Materials 1 (2002) 60.
  9. G. Decher, J.D. Hong and J. Schmitt, "Buildup of ultrathin multilayer films by a self-assembly process: III. Conseq-utively alternating adsorption of anionic and cationic polyelectrolytes on charged surfaces", Thin Soild Films, 210/211 (1992) 831.
  10. J.D. Mendelsohn, C.J. Barrett, V.V. Chan, A.J. Pal, A.M. Mayes and M.F. Rubner, "Fabrication of microporous thin films from polyelectrolyte multilayers", Langmuir 16 (2000) 5017. https://doi.org/10.1021/la000075g
  11. S.S. Shiratori and M.F. Rubner, "pH-dependent thickness behavior sequentially adsorbed layers of weak polyelectrolytes", Macromolecules 33 (2000) 4213. https://doi.org/10.1021/ma991645q
  12. D. Yoo, S.S. Shiratori and M.F. Rubner, "Controlling bilayer composition and surface wettability of sequentially adsorbed multilayers of weak polyelectrolytes", Macromoelcules 31 (1998) 4309. https://doi.org/10.1021/ma9800360
  13. R. Wang, K. Hashimoto, A. Fujishima, M. Chikni, E. Kojima, A. Kitamura and M. Shimohigoshi, "Photogeneration of highly amphiphilic $TiO_2$ surfaces", Advanced Material 2 (1998) 135.
  14. O. Carp, C.L. Huisman and A. Reller, "Photoinduced reactivity of titanium dioxide", Solid State Chem. 32 (2004) 33. https://doi.org/10.1016/j.progsolidstchem.2004.08.001
  15. P. Chrysicopoulou, D. Davazoglou, Chr. Trapalis and G. Kordas, "Optical properties of very thin (< 100 nm) solgel $TiO_2$", Thin Solid Films 323 (1998) 188. https://doi.org/10.1016/S0040-6090(97)01018-3
  16. M. Takeuchi, T. Itoh and H. Nagasaka, "Dielectric properties of sputtered $TiO_2$ films", Thin Solids Films 51 (1978) 83. https://doi.org/10.1016/0040-6090(78)90215-8
  17. K.S. Yeung and Y.W. Lam, "A simple chemical vapour deposition method for depositing thin $TiO_2$ films", Thin Solids Films 109 (1983) 169. https://doi.org/10.1016/0040-6090(83)90136-0
  18. J.H. Kim and S. Shiratori, "Characterization of $TiO_2$/Polyelectrolyte thin film fabricated by a layer-by-layer self-assembly method", Jpn. J. Appl. Phys. 44 (2005) 7588. https://doi.org/10.1143/JJAP.44.7588