KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

An Experimental Study on Bond Characteristics of FRP Reinforcements with Various Surface-type

다양한 표면형상에 따른 FRP 보강재의 부착특성 실험연구

  • 정우태 (한국건설기술연구원 구조교량연구실) ;
  • 박영환 (한국건설기술연구원 구조교량연구실) ;
  • 박종섭 (한국건설기술연구원 구조교량연구실)
  • Received : 2010.09.29
  • Accepted : 2011.07.08
  • Published : 2011.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

FRP (Fiber Reinforced Polymer) tendons can be used as an alternative to solve the corrosion problem of steel tendons. Material properties of FRP tendons-bond strength, transfer length, development length-must be determined in order to apply to concrete structures. First of all, in case of application for pretension concrete members with CFRP tendons, transfer length is an important characteristic. The bond of the material characteristics should be demanded clearly to apply to PSC structures prestressed with FRP tendons. This paper investigated on the bond characteristics of FRP reinforcements with various surface-type. To determine the bond characteristics of FRP materials used in place of steel reinforcement or prestressing tendon in concrete, pull-out testing suggested by CAN/CSA S806-02 was performed. A total of 40 specimens were made of concrete cube with steel strands, deformed steel bar and 6 different surface shape FRP materials like carbon or E-glass. Results of the bonding tests presented that each specimen showed various behaviors as the bond stress-slip curve and compared with the bond characteristic of CFRP tendon developed in Korea.

FRP 긴장재는 PS 강연선의 부식 문제를 해결하기 위한 대안으로써 사용될 수 있으며, FRP 긴장재의 재료특성(부착강도, 인장강도, 전달길이 등)은 구조물에 적용하기 위해서 결정되어야 한다. 재료특성 중에 부착은 FRP 긴장재로 긴장된 PSC 구조물에 적용하기 위해 명확하게 요구되어야 한다. 이 연구는 다양한 표면형상을 갖는 FRP 보강재의 부착특성을 연구하였다. 콘크리트의 철근과 강연선 대신에 사용되는 FRP 재료의 부착특성을 결정하기 위해 CAN/CSA S806-02에서 제안된 직접인발 시험을 수행하였다. 강연선, 이형 철근, 6가지 다른 표면 형상을 갖는 탄소 또는 유리섬유 FRP 보강재에 대하여 총 40개의 시편이 제작되었다. 부착실험 결과 각 실험체의 다양한 부착응력-슬립 곡선을 나타냈고, 국내에서 제작된 CFRP 긴장재의 부착특성과 비교하였다.

Keywords

References

  1. 박지선, 유영찬, 박영환, 유영준(2004) FRP 보강근의 부착 특성에 관한 실험적 연구, 2004 대한토목학회 정기학술대회, 대한토목학회.
  2. 박영환 등(2008) FRP 긴장재 및 정착장치의 개발과 활용을 위한 연구, 연구보고서, 한국건설기술연구원.
  3. ACI Committee 440 (2004) Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures, ACI 440.3R-04, American Concrete Institute, Detroit, pp. 20-22
  4. ASTM C 234 (1991) Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel.
  5. CAN/CSA S806-02 (2002) Design and Construction of Building Components with Fibre Reinforced Polymers, Canadian Standards Association, Rexdale, Ontario, Canada, pp. 177.
  6. Cosenza E., Manfredi G., Realfonza R. (1997) Behavior and Modelling of Bond of FRP Rebars to Concrete, Journal of Composites for Construction, ASCE, Vol. 1, No. 2, pp. 41-51.
  7. JSCE (1997) Recommendation for design and construction of concrete structures using continuous fiber reinforcing materials, Concrete Engineering Series, No. 23, pp. 325.
  8. Kanakubo, T., Yonemaru, K., Fukuyama, H., Fujisawa, M., and Sonobe, Y. (1993) Bond performance of concrete members reinforced with FRP bars, Proc. Int. Symp. on Fiber Reinforced Plastic Reinforcement for Concrete Struct., ACI SP-138, A. Nanni and C. W. Dolan, eds.
  9. Makitani, E., Irisawa, I., and Nishiura, N. (1993) Investigation of bond in concrete member with fiber reinforced plastic bars, Proc., Int. Symp. on Fiber Reinforced Plastic Reinforcement for Concrete Struct.; ACI SP-138, A. Nanni and C. W. Dolan, eds.