DOI QR코드

DOI QR Code

A Basic Study on Plastic Suspension System for Automotive Seat under Consideration of Body Pressure Distribution

체압 분포를 고려한 자동차 시트용 플라스틱 서스펜션에 대한 기초적 연구

  • Park, Dae-Min (Division of Mechanical & Automotive Engineering, Kongju University) ;
  • Kim, Key-Sun (Division of Mechanical & Automotive Engineering, Kongju University) ;
  • Choi, Doo-Seuk (Division of Mechanical & Automotive Engineering, Kongju University) ;
  • Kim, Sei-Whan (Division of Mechanical & Automotive Engineering, Kongju University) ;
  • Park, Won-Sik (Daechang Seat Co. LTD.) ;
  • Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju University)
  • 박대민 (공주대학교 기계자동차공학부) ;
  • 김기선 (공주대학교 기계자동차공학부) ;
  • 최두석 (공주대학교 기계자동차공학부) ;
  • 김세환 (공주대학교 기계자동차공학부) ;
  • 박원식 ((주)디에스시) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2011.10.12
  • Accepted : 2011.11.10
  • Published : 2011.11.30

Abstract

This study investigates the plastic suspension assembly which is installed on inside of vehicle seat and support passenger's back to supply the comfortable ride performance. It aims to develop the structural design in order to support driver's back uniformly and assemble seat back frame with plastic suspension effectively. The part of suspension is designed by considering the body pressure distribution of driver and it has the same size as the practical model on simulation analysis. It is confirmed that the analysis result of plastic suspension approaches the practical measured values and the better body pressure distribution can be obtained as compared with the existing wire type.

본 연구는 자동차용 시트 Back frame 내부에 설치하여 탑승자의 등부분을 지지하며 편안한 승차감을 제공하는 시트용 서스펜션 시스템에 대한 연구이다. 운전자의 등 전체를 고르게 지지하는 구조로 설계하고 시트 백 프레임과 플라스틱 서스펜션의 조립을 효과적으로 할 수 있는 구조로 개발 하고자 한다. 서스펜션 단품은 운전자의 체압 분포를 고려하여 설계하고 시뮬레이션 해석에 있어서는 실제 모델과 같은 크기를 가지고 하였다. 플라스틱 서스펜션의 해석결과가 실제 측정값에 근접함을 확인하였으며 기존 Wire Type에 비해 양호한 체압분포를 얻을 수 있었다.

Keywords

References

  1. Park, S. N., "Development Trend of Car Seat Technology", Transactions of KSAE, Vol. 31, No. 4, pp. 26-33, 2009.
  2. Kim, J. H., Park, D. U., Lee, J. H., Kim, M. G., and Yoo, W. S., "Evaluation of Ride Comfort Considering Seat Vibration", 2002 Spring Conference Proceeding of KSAE, Vol. 2, pp. 933-938, 2002.
  3. Hwang, S. W., Lee, K. N., Park, S. D., and Pyun, J. K., "Driving Adaptive Control System Development for Air-Bladder Seat", 2007 Spring Conference Proceeding of KSAE, pp. 2237-2244, 2007.
  4. Cho, J. U., Bang, S. O., and Cho, C. K., "A Study on the Development of Suspension System for Automotive Seat", 2010 Spring Conference Proceeding of KSAE, pp. 2660-2662, 2010.
  5. Lee, H. C., Park, H. M., Na, H. H., Kim, J. J., and Cho, H. I., "A Study on the Comfort Evaluation Method for Automotive Seat", 2007 Spring Conference Proceeding of KSAE pp. 1412-1416, 2007.
  6. Park, W. T., and Choi, J. J.," Study on the Analysis of Orthotropic Thin Plates and Orthotropic Thick Plates", Journal of the Korea Academia-Industrial cooperation Society, Vol. 4, No. 2, pp. 76-80, 2003.
  7. Lee, S. W., Shim, U. T., Lee, K. S., Woo, D. U., and Kim, J. H., "Gravitational deflection analysis for the shielded slot plate with many tiny structures", Journal of the Korea Academia-Industrial cooperation Society, Vol. 7, No. 3, pp. 291-297, 2006.
  8. Cho, J. U., Min, B. S., Kim, K. S., Choi, D. S., and Cho, C. K., "Analysis on Displacement of Lumber Support Affecting Comfortableness of Passenger", Proceedings of the KAIS Fall Conference(II), Vol. 11, No. 2. pp. 618-621, 2010.

Cited by

  1. Analysis Study on Vibration Durability on Lens Manufacturing System of Camera vol.15, pp.5, 2014, https://doi.org/10.5762/KAIS.2014.15.5.2617