Journal of the Computational Structural Engineering Institute of Korea (한국전산구조공학회논문집)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지

Shear Analysis of RC Structure using Evolutionary Structural Optimization

점진적 구조 최적화 기법을 이용한 철근 콘크리트 구조물의 전단 해석

  • 곽효경 (KAIST 건설 및 환경공학과) ;
  • 양규영 (KAIST 건설 및 환경공학과) ;
  • 신동규 (KAIST 건설 및 환경공학과)
  • Received : 2011.02.18
  • Accepted : 2011.05.26
  • Published : 2011.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper introduces the construction of Strut-Tie model based on the Evolutionary Structural Optimization(ESO) method. Differently from conventional ESO method which uses plane stress elements, the introduced approach adopts the use of truss elements with the fact that the optimum topology of structures by ESO method is open a truss-like structure. Several examples are provided to demonstrate the capability of the proposed method in finding the best Strut-Tie models. In advance, it is shown that the introduced method is supported through the correlation studies between two-dimensional plane stress analysis and Strut-Tie models, and can be used effectively in practice, especially in shear design of complex reinforced concrete members where no previous experience is available.

이 논문은 ESO 기법을 기초로 한 Strut-Tie 모델의 구성을 제안하고 있다. 평면응력 요소를 사용한 기존의 ESO방법과 달리, ESO기법에 의해 최적화된 구조가 트러스와 비슷한 형태를 가지는 사실에 기인하여, Strut-Tie 모델을 통한 전단설계에 트러스 요소를 사용한 ESO기법을 새롭게 적용하였다. 예제들을 통해 제안된 방법이 가장 좋은 Strut-Tie 모델을 찾을 수 있음을 입증하였으며, 앞서 2차원 평면응력 요소와 Strut-Tie 모델의 연관성에 대한 연구를 통해 ESO방법이 효과적으로 사용될 수 있음은 물론 경험하지 못한 특히 복잡한 철근 콘크리트 구조물의 전단설계에 효과적으로 사용이 가능한 대안이 될 수 있을 것으로 판단된다.

Keywords

References

  1. 김상식 (2009) 철근콘크리트 구조설계, 문운당.
  2. 김우, 김진근, 오병환, 정란, 최완철 (2005), 콘크리트구조설계, McGraw-Hill Education.
  3. 임승욱, 박흥용 (1992) Strut-Tie model을 이용한 철근 콘크리트 부재의 전단 설계, 공학기술연구소논문집, 명지대학교, 7, pp.119-141.
  4. 최창근 (2002) 유한요소법, 테크노프레스.
  5. ASCE-ACI Committee 445 (1998) Recent Approaches to Shear Design of Structural Cncrete, Journal of Structural Engineering, 124(12), pp.1375-1471. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1375)
  6. ASCE-ACI Structural Journal (2002) Examples for the Design of Structural Concrete with Strut-and- Tie models(SP-208), Farmington Hills, p.242.
  7. Bendsoe, M.P, Kikuchi, N. (1988) Generating Optimal Topologies in Structural Design using a Homogenization Methods, Computer Methods in Applied Mechanical Engineering, 71, pp.197-224.
  8. Chen, B.S., Hangenberger, M.J., Breen, J.E. (2002) Evaluation of Strut-and-Tie Model Applied to Deep Beam with Opening, ACI Structural Journal, 99(4), pp.445-450.
  9. Chu, D.Nha., Hira, A., Xie Y.M., Steven G.P. (1997) On Various Aspects of Evolutionary Structural Optimization for Problems with Stiffness Constraints, Finite Elements in Analysis and Design, 24. pp.197-212.
  10. Computers and Structures, Inc. (1998) SAP2000 Analysis Reference, CSI.
  11. Hong, S.G. (2000) Strut-and-Tie Models and Failure Mechanisms for Bar Development in Tension- Tension- Compression Nodal Zone, ACI Structural Journal, 97(1), pp.111-121.
  12. Liang, Q.Q., Xie, Y.M., Steven, G.P. (2000) Topology Optimization of Strut-and-Tie Models in Reinforced Concrete Structures using an Evolutionary Procedure, ACI Structural Journal, 97(2), pp.322-330.
  13. Liang, Q.Q., Xie, Y.M., Steven, G.P. (2001) Generating Optimal Strut-and-Tie Models in Prestressed Concrete Beams by Performance-Based Optimization, ACI Structural Journal, 98(2), pp.226 -232.
  14. McGregor, J.G. (1991) Dimentioning and Detailing, IABSE Coll Colloquium "Structural Concrete", Stuttgart, p.391.
  15. MOrsch, E. (1912) Der Eisenbetonbau, Seine Theorie und Anwendung(Reinforced Concrete, Theory and Application), Verlag Konrad Wittwer, Stuttgart.
  16. Qing, Li, Xie, Y.M., Steven, G.P. (1999) Shape and Topology Design for Heat Conduction by Evolutionary Structural Optimization, International Journal of Heat and Mass Transfer, 42, pp.3361 -3371. https://doi.org/10.1016/S0017-9310(99)00008-3
  17. Qing, Li, Xie, Y.M., Steven, G.P. (2000) Evolutionary Structural Optimization for Stress Minimization Problems by Discrete Thickness Design, Computers and Structures, 78, pp.769-780.
  18. Ritter, W. (1899) Die Bauweise Hennebique(The Hennebique System), Schweizerische Bauzeitung, Bd. ΧΧΧΙΙΙ, 7.
  19. Schlaich, J. Schafer, K. Jennewein, M. (1987) Toward a Consistent Design of Structural Concrete, J.PCI, 32(3), pp.74-147. https://doi.org/10.15554/pcij.05011987.74.150
  20. Xie, Y.M., Steven, G.P. (1996) Evolutionary Structural Optimization for Dynamic Problems, Computers and Structures, 58, pp.1067-1073.
  21. Xie, Y.M., Steven, G.P. (1997) A Simple Evolutionary Procedure for Structural Optimization, Computers and Structures, 19, pp.885-896.
  22. Xie, Y.M., Steven, G.P. (1997) Evolutionary Structural Optimization, Springer.
  23. Xie, Y.M., Steven, G.P., Rong, J.H. (2001) An Improved Method for Evolutionary Structural Optimization Against Buckling, Computers and Structures, 79, pp.253-263.
  24. Yun, Y.M. (2000) Computer Graphics for Nonlinear Strut-Tie Model Approach, Journal of Computing in Civil Engineering, 14(2), pp.127-133. https://doi.org/10.1061/(ASCE)0887-3801(2000)14:2(127)
  25. Yun, Y.M. (2000) Nonlinear Strut-Tie model Approach for Structural concrete, ACI Structural Journal, 97(4), pp.581-590.
  26. Yun, Y.M. (2000) Nonlinear Strut-Tie Model Approach in Structural Concrete Deep Beams, ACI Structural Journal, 193, pp.689-706.