DOI QR코드

DOI QR Code

Effects of the Fuel Injection Timing on the Combustion Characteristics in CRDI Diesel Engine

CRDI 디젤엔진의 연료분사기기가 연소특성에 미치는 영향

  • Received : 2010.11.01
  • Accepted : 2011.07.10
  • Published : 2011.10.31

Abstract

This paper describes the engine performance and combustion characteristics of a CRDI diesel engine, operated by electronically controlled diesel fuel injector with variable injection timing. This experiment focused on fuel injection timing and pressure about combustion characteristics of CRDI diesel engine. EGR was excepted because it would be furtherly analyzed with additional experiments. The experiment was conducted under the circumstance of engine torque for 4, 8, 12 and 16 kgf-m and fuel injection timing for $15^{\circ}$, $10^{\circ}$ and $5^{\circ}$ BTDC, at the engine speed of 1100, 1400, 1700 and 2000 rpm. Fuel injection was controlled to retard or advance initiation of the injection event by electronically controlled fuel injection unit injector on the personal computer. When fuel was injected into the cylinders of a CRDI diesel engine it would go through ignition delay before starting of combustion. Therefore, fuel injection timing of CRDI diesel engine had a significant effect upon performance and combustion characteristics. Depending on the injection timing the fuel consumption rate following the rotational speed and torque was 3~78 g/psh (1.7~30.6%). The range of fuel injection timing that resulted in low fuel consumption overall was BTDC 15-10 degrees.

Keywords

References

  1. L. Postrioti, C. N. Grimaldi and M. Ceccobello, 2004, "Diesel Common Rail Injection System Behavior with Different Fuels", SAE Paper, 2004-01-0029.
  2. W. Hannibal, Mark A. Mohr and Rudolf Flierl, 2004, "Potential of a Mechanical Fully-Variable Lift System for Engines with a Side-Mounted Camshaft", SAE Paper, 2004-01-1359.
  3. F. Yang and O. Minggao, 2003, "Experimental Research on EGR in a Diesel Engine Equipped with Common Rail Injection System", SAE Paper, 2003-01-0351.
  4. B. Fulton and L. Leviticus, 1993, "Variable Injection Timing Effects on the Performance and Emissions of a Direct Injection Eiesel Engine", SAE Paper, 932385.
  5. P. Carlucci, A. Ficarella and D. Laforgia, 2003, "Effects of Pilot Injection Parameters on Combustion for Common rail Diesel Engines", SAE Paper, 2003-01-0700.
  6. H. K. Gangwar and A. K.Agrwal, 2008, "Combustion Characteristics of Jatropha Oil Blends in a Transportation Engine", SAE Paper, 2008-01-1383.
  7. Heywood, J. B., Internal Combstion Engine Fundamentals. McGraw-Hill Book Company, NewYork, pp. 503-517.
  8. H. Heisler 1995., Advanced Engine Technology. College of North West London Willesden Centre London, UK pp. 213-222.

Cited by

  1. The Effects of Partially Premixed Pilot Injection Timing on the Combustion and Emission Characteristics in a Common Rail Diesel Engine vol.17, pp.6, 2013, https://doi.org/10.9726/kspse.2013.17.6.018
  2. The Fabrication and Trial Performance of Injector Driver for CRDI vol.17, pp.2, 2013, https://doi.org/10.9726/kspse.2013.17.2.038
  3. Study on Optimization of Fuel Injection Parameters and EGR Rate of Off-road Diesel Engine by Taguchi Method vol.22, pp.7, 2014, https://doi.org/10.7467/KSAE.2014.22.7.084
  4. A Study for Combined Boosting Performance of Turbo- charger and Supercharger on Vehicle Diesel Engine vol.16, pp.5, 2011, https://doi.org/10.17958/ksmt.16.5.201410.1793
  5. Effect of operating conditions on the combustion and emission characteristics in small HSDI CI engine vol.17, pp.4, 2011, https://doi.org/10.17958/ksmt.17.4.201508.699
  6. Effects of Biodiesel Fuel Injection Timing on Combustion, Exhaust Emissions, and Energy Efficiency in a Single Diesel Engine vol.23, pp.4, 2019, https://doi.org/10.9726/kspse.2019.23.4.078