한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제20권5호
  • /
  • Pages.541-546
  • /
  • 2011
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

AC4C와 AC7A 주조재의 열변형 수치해석적 연구

Numerical Study on Thermal Deformation of AC4C and AC7A Casting Material

  • 윤희성 (조선대학교 첨단부품소재공학과) ;
  • 오율권 (조선대학교 메카트로닉스공학과)
  • 투고 : 2011.05.09
  • 심사 : 2011.08.06
  • 발행 : 2011.10.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study was numerically investigated on thermal deformation of AC4C and AC7A aluminum alloy casting material for manufacturing the automobile tire mold. The metal casting device was used in order to manufacture the mold product of automobile tire at the actual industrial field. The temperature distribution and the cooling time of these materials were numerically calculated by finite element analysis. Thermal deformation with stress distribution was also calculated form the temperature distribution results. The thermal deformation was closely related to the temperature difference between the surface and inside of the casting. As shown by numerical analysis result, the thermal deformation of AC7A casting material became higher than AC4C casting material. In addition, the results of displacement and stress distributions appeared to be larger at the center parts of casting than on its sides because of the shrinkage caused by the cooling speed difference.

키워드

참고문헌

  1. Cheon, B. W., 1994, The Effect of the Metallic Mold Cooling System on the Solidification Structures and the Mechanical properties for Al alloy Casting, A Thesis for a Doctorate, Dong-A University, Republic of Korea.
  2. Sung, B. S., Kim, M. A., Cha, Y. H., Kim, J. D., Kim, D. J. and Lee, Y. S., 2006, "A Study on the Molding Analysis of Automobile Regulator Housing using the Die Casting," Proceedings of the KSMTE Autumn Conference 2006, pp. 454-459.
  3. Mikhailov, M. D., Comini, G., and Guidice, S. Del, 1977, "Determination of thermal wave distributions by the finite element method," Int. J. Heat Mass Tran., Vol. 20, No. 3, pp. 195-200. https://doi.org/10.1016/0017-9310(77)90205-8
  4. Hong, C. P., Umeda, T., and Kimura, Y., 1983, Boundary Elements (Eds. Breibbia, C. A., et al.), Springer-Verlag, Berlin, pp. 153.
  5. Choi, J. K., and Hong, C. P., 1992, Modeling of Casting and Solidification Processes 1991 (Eds. Hong, C. P., et al.), Yonsei Univ. Press, Korea, pp. 337.
  6. Kim, S. M., 2009, "A Study on Thermal Analysis in Ventilated Disk Brake by FEM," Journal of the KSMTE, Vol. 18, No. 5, pp. 544-549.