DOI QR코드

DOI QR Code

Fe 입자를 미세 분산 시킨 AlN 박막의 물리적 성질

Physical Properties of Fe Particles Fine-dispersed in AlN Thin Films

  • 한창석 (호서대학교 국방과학기술학과) ;
  • 김장우 (호서대학교 디지털디스플레이공학과)
  • Han, Chang-Suk (Dept. of Defense Science & Technology, Hoseo University) ;
  • Kim, Jang-Woo (Dept. of Digital Display Engineering, Hoseo University)
  • 투고 : 2010.10.14
  • 심사 : 2010.11.16
  • 발행 : 2011.01.27

초록

This paper describes the fabrication of AlN thin films containing iron and iron nitride particles, and the magnetic and electrical properties of such films. Fe-N-Al alloy films were deposited in Ar and $N_2$ mixtures at ambient temperature using Fe/Al composite targets in a two-facing-target DC sputtering system. X-ray diffraction results showed that the Fe-N-Al films were amorphous, and after annealing for 5 h both AlN and bcc-Fe/bct-$FeN_x$ phases appeared. Structure changes in the $FeN_x$ phases were explained in terms of occupied nitrogen atoms. Electron diffraction and transmission electron microscopy observations revealed that iron and iron nitride particles were randomly dispersed in annealed AlN films. The grain size of magnetic particles ranged from 5 to 20 nm in diameter depending on annealing conditions. The saturation magnetization as a function of the annealing time for the $Fe_{55}N_{20}Al_{25}$ films when annealed at 573, 773 and 873 K. At these temperatures, the amount of iron/iron nitride particles increased with increasing annealing time. An increase in the saturation magnetization is explained qualitatively in terms of the amount of such magnetic particles in the film. The resistivity increased monotonously with decreasing Fe content, being consistent with randomly dispersed iron/iron nitride particles in the AlN film. The coercive force was evaluated to be larger than $6.4{\times}10^3Am^{-1}$ (80 Oe). This large value is ascribed to a residual stress restrained in the ferromagnetic particles, which is considered to be related to the present preparation process.

키워드

참고문헌

  1. H. Watanabe, K. Kakizaki and N. Hiratsuka, J. Magnetics Society of Japan, 24(4), 275 (2000). https://doi.org/10.3379/jmsjmag.24.275
  2. A. Makino and Y. Hayakawa, J. Jpn. Inst. Metals, 57(11), 1301 (1993).
  3. S. Fujii, S. Ohnuma, H Fujimori and T. Masumoto, J. Magnetics Society of Japan, 17(2), 333 (1993). https://doi.org/10.3379/jmsjmag.17.333
  4. S. Ohnuma, H. Fujimori, N. Yano, S. Furukawa, S. Fujii and T. Masumoto, J. Magn. Magn. Mater., 126, 556 (1993). https://doi.org/10.1016/0304-8853(93)90687-W
  5. K. J. Kim, J. Y. Park, K. Y. Kim, T. H. Noh and I. K. Kang, J. Kor. Magnetic. Soc., 5(5), 491 (1995) (in Korean).
  6. V. Brien and P. Pigeat, J. Cryst. Growth, 299(1), 189 (2007). https://doi.org/10.1016/j.jcrysgro.2006.10.238
  7. D. H. Mosca, F. Petroff, A. Fert, P. A. Schroeder, W. P. Pratt Jr and R. Laloee, J. Magn. Magn. Mater., 94(1-2), L1 (1991). https://doi.org/10.1016/0304-8853(91)90102-G
  8. F. Muktepavela, I. Manika, L. Grigorjeva and V. Skvortsova, Proc. of SPIE, 5122, 434 (2003). doi:10.1117/12.515693.
  9. S. S. P. Parkin, N. More and K. P. Roche, Phys. Rev. Lett., 64(19), 2304 (1990). https://doi.org/10.1103/PhysRevLett.64.2304
  10. T. Takahata, S. Araki and T. Shinjo, J. Magn. Magn. Mat., 82(2-3), 287 (1989). https://doi.org/10.1016/0304-8853(89)90167-4
  11. T. L. Hylton, K. R. Coffey, M. A. Parker, J. K. Howard, Science, 261(5124), 1021 (1993). https://doi.org/10.1126/science.261.5124.1021
  12. A. E. Berkowitz, J. R. Mitchell, M. J. Carey, A. P. Young, S. Zhang, F. E. Spada, F. T. Parker, A. Hutten and G. Thomas, Phys. Rev. Lett., 68(25), 3745 (1992). https://doi.org/10.1103/PhysRevLett.68.3745
  13. J. Q. Xiao, J. S. Jiang and C. L. Chien, Phys. Rev. Lett., 68(25), 3749 (1992). https://doi.org/10.1103/PhysRevLett.68.3749
  14. T. Okabe, T. Ohtsuka, T. Yagi, N. Taketoshi, T. Baba, A. Miyamura, Y. Sato and Y. Shigesato, Netsu Bussei, 21, 115 (2007).
  15. H. Nasu, S. Kaneko, J. Matsuoka and K. Kamiya, J. Ceram. Soc. Jpn., 101(5), 548 (1993). https://doi.org/10.2109/jcersj.101.548
  16. T. Kineri, M. Mori, K. Kadono, T. Sakaguchi, M. Miya, H. Wakabayashi and T. Tsuchiya, J. Ceram. Soc. Jpn., 101(12), 1340 (1993). https://doi.org/10.2109/jcersj.101.1340
  17. J. S. Han, S. H. Moon, S. I. Woo and E. C. Kim, Sae Mulli, 46(6), 347 (2003).
  18. G. Herzer, IEEE Trans. Magn., 26(5), 1397 (1990). https://doi.org/10.1109/20.104389
  19. C. S. Han and J. Lee, J. Korean Society for Heat Treatment, 19(6), 320 (2006).
  20. H. Mamiya and I. Nakatani, J. Magnetics Society of Japan, 25(4), 691 (2001). https://doi.org/10.3379/jmsjmag.25.691