Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Performance Evaluation on an Active Hybrid Mount System for Naval Ships Using Piezostack Actuator

압전작동기를 이용한 함정용 능동 하이브리드 마운트 시스템의 진동제어 성능 평가

  • 벤큐오 (인하대학교 대학원 기계공학과) ;
  • 최승복 (인하대학교 기계공학부) ;
  • 오종석 (인하대학교 대학원 기계공학과)
  • Received : 2010.10.07
  • Accepted : 2010.12.24
  • Published : 2011.01.20
Download PDF
⟨ Previous Next ⟩

Abstract

In this work, a new active hybrid mount featuring piezostack actuator and rubber element is proposed, and its vibration control performance is evaluated by applying a robust frequency-shaped sliding mode controller. After describing the configuration of the proposed mount, vibration control performances are experimentally evaluated. A mount system with four active hybrid mounts is then constructed. To attenuate vibrations on the supported mass, a frequency-shaped sliding mode controller is designed and implemented to the system. Finally, control performances are obtained and presented in time and frequency domains via computer simulation.

Keywords

References

  1. Moon, S. J., Ji, Y. J., Choi, S. B., Lee, H. Y., Kim, J. H. and Jung, W. J., 2008, A Study on Development of an Active Hybrid Mount for Naval Ships, Journal of the Society of Naval Architects of Korea, Vol. 45, No. 159, pp. 288-295. https://doi.org/10.3744/SNAK.2008.45.3.288
  2. Yu, Y., Naganathan, N. G. and Dukkipati, R. V., 2001, A Literature Review of Automotive Vehicle Engine Mounting Systems, Mechanism and Machine Theory. https://doi.org/10.1016/S0094-114X(00)00023-9
  3. Kim, S. H., Hong, S. L. and Choi, S. B., 2002, Active Vibration Control of a Beam Structure Using Hybrid Mount, Proceedings of the KSNVE Annual Autumn Conference, pp. 440-445.
  4. Kim, J. S., 1992, Active Vibration Control of Flexible Beam Using Piezoelectric Actuator, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 2, No. 3, pp. 173-180.
  5. Takayoshi, K., Takafumi, F., Takayoshi, H., Takeo, A., Nobuyoshi, M., Satoru, A. and Kohtaro, T., 1997, Active Vibration Control of Frame Structure with Smart Structure Using Piezoelectric Actuators(Vibration Control by Control of Bending Moment of Columns), Smart Material and Structures Vol. 6, No. 4, pp. 448-456. https://doi.org/10.1088/0964-1726/6/4/009
  6. Park, D. H. and Choi, S. B., 2008, Active Vibration Control of UAV EO/IR Sensor Mount Using Piezoelectric Actuator, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No. 12, pp. 1278-1285. https://doi.org/10.5050/KSNVN.2008.18.12.1278
  7. Lee, D. Y. and Choi, S. B., 2009, Control of Active Engine Mount System Featuring MR Fluid and Piezostack via HILS, Transactions of the Korea Society for Noise and Vibration Engineering, Vol. 20, No. 2, pp. 122-128. https://doi.org/10.5050/KSNVE.2010.20.2.122
  8. Choi, S. B., Lee, H. K. and Chang, E. G., 2001, Field Test Results of a Semi-active ER Suspension Associated with Skyhook Controller, Mechatronics, Vol. 11, No. 3, pp. 345-353. https://doi.org/10.1016/S0957-4158(00)00022-2
  9. Zuo, L. and Slotine, J. J. E., 2005, Robust Vibration Isolation via Frequency-shaped Sliding Control and Modal Decomposition, Journal of Sound and Vibration, Vol. 285, No. 4/5, pp. 1123-1149. https://doi.org/10.1016/j.jsv.2004.09.014

Cited by

  1. Active Vibration Control Experiment on Automobile Using Active Vibration Absorber vol.21, pp.8, 2011, https://doi.org/10.5050/KSNVE.2011.21.8.741