Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Study on Experimental Equipment for Anti-Skid Control Logic Test

활주방지로직 시험장치에 대한 연구

  • Received : 2010.06.16
  • Accepted : 2010.11.15
  • Published : 2011.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

To maintain the safety and efficiency of railroad vehicles, it is important to understand the working of the brake system with anti-skid control unit (ASCU) for rolling stocks. In this paper, a HILS (Hardware In-the Loop Simulations) system with ASCU hardware (for logic) and a DSP board (for dynamics) is developed to analyze skidding of the Hanvit-200 train during the process of braking. Experimental results are presented for the case that the skid on one of the four wheels is artificially generated using a Simulink model. A convenient GUI is prepared using ControlDesk of dSPACE.

철도차량에서 활주방지제어장치를 포함한 제동 시스템을 이해하는 것은 안전과 철도차량의 운영을 위하여 매우 중요한 요소이다. 본 논문에서는 실제 철도차량에 장착되어 있는 활주방지제어장치와 동역학 모델이 포함되어 있는 HILS 시스템을 이용하여 한빛 200 의 활주현상을 해석하였다. 활주를 발생시키기 위해 Simulink 를 이용하여 프로그램 하였고,결과를 확인하기 위한 GUI 프로그램은 dSPACE 사에서 제공하는 ControlDesk 를 이용하였다.

Keywords

References

  1. KORAIL, 2008, http://news.korail.com/main/php/search_list.php?pg=6&skey=ECO-RAIL.
  2. Jergeus, J., Odenmarck, C., Lunden, R., Sotkovszki and P., Karlsson, 1999, “Full-Scale Railway Wheel Flat Experiments,” Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and Rapid Transit, Vol. 213, No. 1, pp.1-13. https://doi.org/10.1243/0954409991530985
  3. Jergeus, J., 1998, “Martensite Formation and Residual Stresses Around Railway Wheel Flats Stresses Around Railway Wheel Flats,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 212, No.1, pp. 69-79. https://doi.org/10.1243/0954406981521051
  4. Kim, H. Y., Kang, C. G., Lee, N. J., Kim, M. S. and Goo, B. C., 2008, “Train Vehicle Simulation for a HILS System of Air Brake,” Proceedings of Korea Society For Railway Spring Annual Meeting, pp. 857-862.
  5. Kang, C. G., Kim, H. Y., Kim, M. S. and Goo, B. C. , 2009, "Anti-skid Control System Analysis of a Tilting Train," Transactions of the KSME (A), Vol. 33, No. 2, pp. 169-178. https://doi.org/10.3795/KSME-A.2009.33.2.169
  6. Kim, H. Y. and Kang, C. G., 2009, “Real-time Simulation for Dynamic Characteristics of Mechanical Braking of the Korean Tilting Train,” Transactions of the KSME (A), Vol. 33, No. 11, pp. 1294-1299. https://doi.org/10.3795/KSME-A.2009.33.11.1294
  7. Huang, S. and Tan, K. K., 2010, “Hardware-in-the-Loop Simulation for the Development of an Experimental Linear Drive,” IEEE Transactions on Industrial Electronics, Vol. 57, No. 4, pp. 1167-1174. https://doi.org/10.1109/TIE.2009.2038408
  8. YUJIN ELECTRIC LTD, 2004, “Anti-Skid Control Unit”
  9. Kim, H. Y., Kang, C. G. and Goo, B. C., 2010, “Study on a Brake HILS system of a Rolling Stock Including ASCU,” ICROS Annual Conference, pp. 62-65.