DOI QR코드

DOI QR Code

A Sturdy on the Sleep Twist Round type Stacked Wind Power System for Appling Environment-Friendly Building and High Rise Housing

대형 건축물과 주거 친화형 저 풍속 연곡형 적층 풍력발전 시스템에 관한 연구

  • 정자춘 (비손에너지, 에너지기술연구소) ;
  • 장미혜 (전북대학교, 에너지공학과, 차세대풍력발전연구센터)
  • Received : 2010.05.24
  • Accepted : 2011.02.21
  • Published : 2011.04.01

Abstract

As the increasing integrity of VLSI, the BIST(Built-In Self Test) is used as an effective method to test chips. Generally the pseudo-random test pattern generation is used for BIST. But it requires too many test patterns when there exist random resistant faults. Therefore we propose a mixed test scheme which applies to the circuit under test, a deterministic test sequence followed by a pseudo-random one. This scheme allows the maximum fault coverage detection to be achieved, furthermore the silicon area overhead of the mixed hardware generator can be reduced.

Keywords

References

  1. Aerodynamic performance of a 5-metre-diameter Darrieus turbine with extruded NACA-0015 blades, R.E. Sheldahl, P.C. Klimas, L.V. Feltz, Sandia Laboratories, 1980.
  2. The Darrieus turbine: A performance prediction model using multiple streamtubes, J.H. Strickland Sandia Laboratories, 1975.
  3. Power prediction of Darrieus type wind turbine considering real air velocity on the wind turbine blade, D. Lian, J.H. Lee, Y.C. Kim, EWEC, Kunsan National University, Korea, 2008.
  4. 2D CFD simulation of dynamic stall on a vertical axis wind turbine: verification and validation with PIV, C.S. Ferreira, G. V. Bussel, G.V. Kuik Delft University of Technology,
  5. Effects of turbulence model and computational grid on the calculation accuracy of the aerodynamic performance of S814 airfoil based on RANS, Lu Congming, Li Yuhong, Guilin, China, International Conference on Energy and Environment Technology, 2009.
  6. CFD Calculations of S809 Aerodynamic Characteristics, W.P Wolfe, S.S Ochs, Sandia Laboratories and Iowa State University Ames, 1997.
  7. Usage of CFX for Aeronautical Simulations, F, Menter, International ANSYS Conference, 2006.