DOI QR코드

DOI QR Code

An effective proposal for strength evaluation of steel plates randomly corroded on both sides under uniaxial compression

  • 투고 : 2009.11.30
  • 심사 : 2011.03.04
  • 발행 : 2011.05.25

초록

This paper presents the results of an investigation into the post-buckling behaviour and ultimate strength of imperfect corroded steel plates used in ship and other marine-related structures. A series of elastic-plastic large deflection finite element analyses is performed on randomly corroded steel plates. The effects of general corrosion on both sides of the plates are introduced into the finite element models using a random thickness surface model. The effects on plate compressive strength as a result of parametric variation of the corroded surface geometry are evaluated. A proposal on the effective thickness is concluded in order to estimate the ultimate strength and explore the post-buckling behaviour of randomly corroded steel plates under uniaxial compression.

키워드

참고문헌

  1. Nakai, T., Matsushita, H., Yamamoto, N., et al. (2004), "Effect of pitting corrosion on local strength of hold frames of bulk carriers (1st report)", Mar. Struct., 17, 403-432. https://doi.org/10.1016/j.marstruc.2004.10.001
  2. ASM International Corrosion. (2001), "ASM Handbook", vol. 13.
  3. Mateus, A.F. and Witz, J.A. (1997), "On the post-buckling of corroded steel plates used in marine structures", Trans. RINA, 140, 165-83.
  4. Daidora, J.C., Parente, J., Orisamolu, I.R., Ma K.T. (1997), "Residual strength assessment of pitted plate panels", Ship Structure Committee, SSC-394.
  5. Slater, P.A., Pandey, M.D. and Sherbourne, A.N. (2000), "Finite element analysis of buckling of corroded ship plates", Can. J. Civ. Eng. CSCE, 27, 463-74. https://doi.org/10.1139/l99-086
  6. Paik, J.K., Lee, J.M. and Ko, M.J. (2003), "Ultimate compressive strength of plate elements with pit corrosion wastage", J. Eng. Mar. Environ., 217(M4), 185-200.
  7. Paik, J.K., Lee, J.M. and Ko, M.J. (2004), "Ultimate shear strength of plate elements with pit corrosion wastage", Thin-Wall. Struct., 42, 1161-76. https://doi.org/10.1016/j.tws.2004.03.024
  8. Ok, D., Pu, Y. and Incecik, A. (2007), "Computation of ultimate strength of locally corroded unstiffened plates under uniaxial compression", Mar. Struct., 20, 100-114 https://doi.org/10.1016/j.marstruc.2007.02.003
  9. Cyr, R.R.J. and Akhras, G. (2004), "Buckling of corroded stiffened steel plates", Proceedings of CSME, p.802-9.
  10. Akhras, G. and Cyr, R. (2004), "Testing corroded stiffened steel plates for ultimate strength", Proceedings of the fifth structural specialty conference CSCE, ST-188.
  11. Nakai, T., Matsushita, H. and Yamamoto, N. (2004), "Effect of pitting corrosion on local strength of hold frames of bulk carriers (2nd report). Lateral-distortional buckling and local face buckling", Mar. Struct., 17, 612-641. https://doi.org/10.1016/j.marstruc.2005.03.001
  12. Dunbar, T.E., et al. (2004), "A computational investigation of the effects of localized corrosion on plates and stiffened panels", Mar. Struct., 17(5), 385-402. https://doi.org/10.1016/j.marstruc.2004.08.012
  13. Amlashi, H.K.K. and Moan, T. (2005), On the strength assessment of pitted stiffened plates under biaxial compression loading", 24th international conference on offshore mechanics and arctic engineering, Halkidiki, Greece.
  14. ANSYS Inc. (2008), "ANSYS 11.0 Reference Manual".
  15. Khedmati, M.R. (2000), "Ultimate strength of ship structural members and systems considering local pressure loads", Dr. Eng. Thesis, Graduate School of Engineering, Hiroshima University.
  16. Fujikubo, M., Yao, T., Khedmati, M.R., Harada, S. and Yanagihara, D. (2005), "Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure, Part 1: Continuous plate", Marine Structures, 18, 383-410. https://doi.org/10.1016/j.marstruc.2005.08.004
  17. Fujikubo, M., Harada, S., Yao, T., Khedmati, M.R. and Yanagihara, D. (2005), "Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure, Part 2: Continuous stiffened panel", Marine Structures, 18, 411-417. https://doi.org/10.1016/j.marstruc.2006.01.001
  18. Ueda, Y. and Yao, T. (1985), "The influence of complex initial deflection on the behaviour and ultimate strength of rectangular plates in compression", J. of Const. Steel Research, 5, 265-302. https://doi.org/10.1016/0143-974X(85)90024-0
  19. Yao, T., Nikolov, P.I. and Miyagawa, Y. (1992), "Influence of welding imperfections on stiffness of rectangular plates under thrust", Proc. of IUTAM Sump. on Mechanical Effects of Welding, (Eds.: Karlsson, K., Lindgren, L.E. and Jonsson, M.), Springer-Verlag, 261-268.
  20. Ohyagi, M. (1987), "Statistical Survey on Wear of Ship's Structural Members", NK Technical Bulletin, Tokyo.
  21. Khedmati, M.R. and Karimi, A.R. (2006), "Ultimate compressive strength of plate elements with randomly distributedcorrosion wastage", Proceeding of the Eight International Conference on Computational Structural Technology, (Eds.: Topping, B.H.V., Montero, G. and Montenegro R.), Civil-Comp Press.
  22. Ghavami, K. (1994), "Experimental study of stiffened plates in compression up to collapse", J. of Const. Steel Research, 28(2), 197-222 [Special Brazilian Issue, Guest Editor Khosrow Ghavami]. https://doi.org/10.1016/0143-974X(94)90043-4
  23. Ghavami, K. and Khedmati, M.R. (2006), "Numerical and experimental investigations on the compression behaviour of stiffened plates", J. of Const. Steel Research, 62(11), 1087-1100. https://doi.org/10.1016/j.jcsr.2006.06.026
  24. Fujikubo, M., Yao, T. and Khedmati, M.R. (1999), "Estimation of ultimate strength of ship bottom plating under combined longitudinal thrust and lateral pressure", Trans. West Japan Soc. Nav. Architects, 99.

피인용 문헌

  1. Load-carrying capacity degradation of reinforced concrete piers due to corrosion of wrapped steel plates vol.20, pp.1, 2016, https://doi.org/10.12989/scs.2016.20.1.091
  2. An enhanced method of predicting effective thickness of corroded steel plates vol.12, pp.5, 2012, https://doi.org/10.12989/scs.2012.12.5.379
  3. Effect of corrosion on the ultimate strength of double hull oil tankers - Part I: stiffened panels vol.42, pp.4, 2011, https://doi.org/10.12989/sem.2012.42.4.507
  4. Tensile strength prediction of corroded steel plates by using machine learning approach vol.24, pp.5, 2017, https://doi.org/10.12989/scs.2017.24.5.635
  5. Compressive behavior of circular hollow and concrete-filled steel tubular stub columns under atmospheric corrosion vol.33, pp.4, 2011, https://doi.org/10.12989/scs.2019.33.4.615