DOI QR코드

DOI QR Code

Experimental Study on Electrical Discharge in Nanoscale Gaps

나노간극에 발생하는 전기방전의 실험적연구

  • Lee, Young-Min (Dept. of Applied Computer Mold design, Korea Poly-tech VI) ;
  • Choi, Hae-Woon (Mechanical and Automotive Engineering, Keimyung Univ.,)
  • 이영민 (한국폴리텍 VI 대학 컴퓨터응용금형학과) ;
  • 최해운 (계명대학교 기계자동차공학과)
  • Received : 2010.09.11
  • Accepted : 2011.02.14
  • Published : 2011.05.01

Abstract

We present an experimental study of electrical discharge in nanoscale gaps. The discharge occurred between a cathode made of sharpened Pt-Ir wire and a gold-plated anode. Electric discharges were detected for electric potentials from 10 V to 80 V, and their gaps ranged from 50 nm to 800 nm. The spark signals indirectly showed spark phenomena such as discharges or shortages in the system. The sparks and discharges strongly depended on the electric potential (voltage) and the radius of the tips. For small gaps, the electrical discharge was random and strongly depended on the radius of the cathode tips.

나노간극에서 발생하는 전기방전에 대해서 실험적으로 연구하고 그 결과를 분석하였다. Pt-Ir 합금으로 구성된 음극과 금으로 박막코팅된 양극사이에 전기방전을 하였다. 음극과 양극에서 전기장을 10V~80V 범위에서 제어하였으며, 간극은 50nm 에서 800nm 로 제어하였다. 이때 발생된 전기방전신호, 쇼트신호 등은 간접적으로 나노간극에서 발생하는 현상들을 이해할 수 있었다. 실험결과 전기방전은 전기장과 음극의 전극첨단의 반경에 매우 밀접하게 관련이 있었다. 작은 간극에서 발생하는 전기방전은 비교적 산포도가 크고 랜덤한 형태를 보였으며 음극 전극첨단의 반경에 민감하게 반응하였다.

Keywords

References

  1. Slade, P.G. and Taylor, E.D., 2002, “Electrical Breakdown in Atmospheric Air Between Closely Spaced $(0.{\mu}m-40{\mu}m)$ Electrical Contacts,” IEEE Trans. Compon. Packaging Technol., Vol. 25, No. 3, pp. 390-396. https://doi.org/10.1109/TCAPT.2002.804615
  2. Purcell, S.T., Binh, V.T. and Thevenard, P., 2001, “Atomic-Size Metal Ion Sources: Principles and Use,” Nanotechnology, Vol. 12, 168-172 https://doi.org/10.1088/0957-4484/12/2/320
  3. Walrave, J. A., Soden, J. M., Tanner, D. M., Tadngyunyong, P. Cole, E., Anderson, R. and Irwin, L., 2003, “Electrostatic Discharge/Electrical Overstress Susceptibility in MEMS: a New Failure Mode,” Proc. SPIE, Vol. 4180, p. 30
  4. Dickrell, D. J. and Dugger, M. T., 2005, “The Effects of Surface Contamination on Resistance Degradation of Hot-Switched Low-Force MEMS,” Proc. of the 5th IEEE Holm conference, Vol. 26-28, pp. 255-258 https://doi.org/10.1109/HOLM.2005.1518252
  5. Farson, D., Choi, H. and Rokhlin, S., 2006, “Electrical Discharges Between Platinum Nanoprobe Tips and Gold Films at Nanometer Gap Lengths,” Nanotechnology, Vol. 17, pp. 132-139. https://doi.org/10.1088/0957-4484/17/1/021