Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지

Design of the Coated Layer Suitable with Conductive Ink for RFID(II) - Effect of coating color components on the surface resistance of conductivity ink -

RFID용 전도성 잉크에 적합한 도공층 설계 (제1보) -도공액 성분에 따른 전도성잉크의 표면저항의 변화-

  • Jung, Hae-Sung (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University) ;
  • Kim, Chang-Geun (Chang-Gang Paper Research Institute Kangwon National University) ;
  • Lee, Yong-Kyu (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University)
  • 정해성 (강원대학교 산림환경과학대학 제지공학과) ;
  • 김창근 (강원대학교 창강제지기술연구소) ;
  • 이용규 (강원대학교 산림환경과학대학 제지공학과)
  • Received : 2011.01.31
  • Accepted : 2011.02.28
  • Published : 2011.03.30
Download PDF
⟨ Previous Next ⟩

Abstract

The conventional coated paper has many functional problems for printed RFID tag. This study was carried out in order to evaluate the effect of coating color components on conductivity of printed coated paper. It has been well known that the efficiency of printed RFID tag is influenced by surface properties of substrate. The required properties for suitable substrate of printed RFID tag are high smoothness and waterproof property. In this study high grammage base paper surface sized with PVA was used. Coated paper was manufactured with five different formulations. Types of coating pigments and dosage of latex were varied. It was obtained high smoothness and also less binder demand with clay than GCC. On the other hand, suitable surface resistance and smoothness of coated paper for RFID tag was obtained with 20% of latex. Besides it shows the possibility of using coated paper for printed RFID tag.

Keywords

References

  1. 유승환, 강수진, 이관수저, "잉크에 부분적으로 잠겨 회전하는 롤 주위의 액막 유동 해석", 대한 기계학회춘계학술대회 강연 및 논문 초록집, 2007. 5.
  2. 김태현, 고분자과학과 기술. RFID용 전도성 잉크, 2008.
  3. 한국남, 김남수, 용해도 낮은 금속을 이용한 전기 전도성 잉크, 한국공작기계학회 논문집, 2008.
  4. 이수용, 김재능, RFID의 패키징 적용에 관한 연구. 한국포장학회지, 14권, 1호, pp. 15-22 (2008).
  5. 이학래, 인쇄모틀 발생 원인과 대책, 펄프종이 기술 34(1): 64-71(2002).
  6. Chang Keun Kim, Yong Kyu Lee, "Studies on the Pore of Coating Layer and Printability(I) - Effects of pigment Size on Pore of Coating Layer" Journal of Korea TAPPI, 31(3), 1999
  7. Lee, D. I., "Development of high-gloss paper coating latexs", TAPPI 1982 Coating Conference Proceedings, TAPPI PRESS, Atlanta, p.125
  8. Mario A Cruz, Mararet Joyce, Paul D. Fleming, Marion Rebros, Alexandra Pekarovicova, "Surface Topography Contribution to RFID Tag Efficiency Related To Conductivity", TAPPI Coating and Graphic Arts Conference, 2007