한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제20권2호
  • /
  • Pages.162-168
  • /
  • 2011
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

초경 엔드밀의 플라즈마 이온 주입과 저온 열처리를 통한 내마멸성 향상

Enhancement of Wear Resistance by Low Heat Treatment and the Plasma Source Ion Implantation of Tungsten Carbide Tool

  • 강성기 (한국폴리텍 VII대학 창원캠퍼스 컴퓨터응용기계설계학과) ;
  • 왕덕현 (경남대학교 기계자동화공학부) ;
  • 김원일 (경남대학교 기계자동화공학부)
  • 투고 : 2010.08.06
  • 심사 : 2010.11.14
  • 발행 : 2011.04.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this research, nitrogen plasma source ion implantation(PSII) of non-coated tungsten carbide endmill tools was conducted with low heat treatment for increasing wear resistance. After the low heat treatment of PSIIed tools to give a homogeneity of wear resistance, the surface modification of tools was analyzed by hardness test, surface roughness and cutting forces. As for the resultant cutting forces, low heat treatment in temperature of $400^{\circ}C$ and $500^{\circ}C$ is stable because of low cutting resistance. The 20-minutes heat treated tool at spindle speed 25000rpm has superiority of surface roughness, Ra of $0.420{\mu}m$ and was found to have good wear resistance. The higher hardness value was obtained by increasing temperature from $300^{\circ}C$ to $600^{\circ}C$ for PSIIed tools with low heat treatment. As the PSIIed tools under 10minutes at temperature of $600^{\circ}C$ have the highest hardness as Hv of 2349.8, It was analyzed that temperature processing give much influences on hardness.

키워드

참고문헌

  1. Kim, D. H., Kim, J. S., Woo, Y. W., and Lee, H. H., 2007, "A Study on the Performance Evaluation of End Mill Tool Fabricated by Ultra-Fine WC," Journal of the Korean Society of Machine Tool Engineers, Vol. 16, No. 6, pp. 1-8.
  2. Schockeley, W., 1957, Forming Semiconductive Devices by Ionic Bombardment, U.S Patent: 2787564.
  3. Conrad, J. R., Radke, J. L., Dood, R. A., Worzala, F. J., and Tran, N. C., 1987, "Plasma Source Ion Implantation Technique for Surface Modification of Materials," J. Appl. Phys., Vol. 62, No. 11, pp. 4591-4596. https://doi.org/10.1063/1.339055
  4. Masamune, S., and Yukimura, K., 2006, "Transient Ion Sheath in Pulsed Plasma," IEEE Trans. Plasma Science, Vol. 34, No. 4, pp. 1195-1198. https://doi.org/10.1109/TPS.2006.876500
  5. Ueda, M., Berni, L. A., and Castro, R. M., 2005, "Application of Plasma Immersion Ion Implantation for Improved Performance of Tools and Industrial Components," Surface and coating Technology, Vol. 200, Issue. 1, pp. 515-520.
  6. Bae, H. J., and Park, H. S., 2004, "Analysis of Working Factors for Improvement of Surface Roughness on High Speed End-Milling," Journal of the Korean Society for Precision Engineering, Vol. 21, No. 6, pp. 52-59.
  7. Munson, C. P., Cluggish, B., Wood, B., and Walter, K., 1997-1998, "Plasma Source Ion Implantation Research, Development, and Applications," LANL Progress report, pp. 122-131.