DOI QR코드

DOI QR Code

Sulfur Redox Equilibrium in Mixed Alkali Silicate Glass Melts

  • Kim, Ki-Dong (Department of Materials Science and Engineering, Kunsan National University) ;
  • Hwang, Jong-Hee (Korea Institute of Ceramic Engineering & Technology)
  • Received : 2010.11.24
  • Accepted : 2011.04.27
  • Published : 2011.05.31

Abstract

The dependence of sulfur redox behavior and its diffusivity on temperature and composition was studied in mixed alkali silicate melts by means of square wave voltammetry (SWV) at different frequencies in a temperature range of $1000^{\circ}C$ to $1400^{\circ}C$. The voltammograms showed two reduction peaks at high frequency but only one peak at low frequency. Irrespective of $K_2O/(Na_2O+K_2O)$, each peak potential due to reduction of $S^{6+}$ to $S^{4+}$ and $S^{4+}$ to $S^0$ moved toward a negative direction with temperature decrease, and the peak current showed a strong dependence on frequency at a constant temperature. However, the compositional dependence of the peak potential showed an inconsistent behavior with an increase of $K_2O$. The mixed alkali effect was not observed in sulfur diffusion. This inconsistency of both peak potential and diffusion for compositional dependence may be derived from the strong volatilization of sulfur in melts.

Keywords

References

  1. A. W. M. Wondergem-de Best, “Redox Behavior and Fining of Molten Glass,” pp. 125-238, in PhD thesis at Technical University Eindhoven Netherlands, 1994.
  2. T. Kordon, C. Ruessel, and E. Freude, “Voltammetric Investigations in $Na_2SO_4$-Refined Soda-Lime-Silica Glass Melts,”Glastech. Ber., 63 [8] 213-18 (1990).
  3. B. LaFage and P. Taxil, “Titration of Molten Soda Lime Silicate Glasses by Square Wave Voltammetry,” J. Electrochem. Soc., 140 [11] 3089-93 (1993). https://doi.org/10.1149/1.2220990
  4. O. Claussen and C. Ruessel, “Voltammetry in a Sulfur and Iron-containing Soda-lime-silica Glass Melt,” Glastech. Ber. Glass Sci. Technol., 70 [8] 231-37 (1997).
  5. J. Y. Tilquin, P. Duveiller, J. Gilbert, and P. Claes, “Electrochemical Behavior of Sulfate in Sodium Silicates at $1000^{\circ}C$,” Electrochimica Acta, 42 [15] 2339-46 (1997). https://doi.org/10.1016/S0013-4686(96)00417-3
  6. H. Yamashita, S. Yamaguchi, M. Yokozeki, M. Nakashima, and T. Maekawa, “Electrochemistry of Sodium Sulfate Doped Glass Melts,” J. Ceram. Soc. Japan, 107 [10] 895-900 (1999). https://doi.org/10.2109/jcersj.107.895
  7. K. D. Kim and J. H. Hwang, “Redox Behavior of Sulfur in Silicate Melts by Square Wave Voltammetry,” Ceramics-Silikaty, 54 [2] 139-43 (2010).
  8. K. D. Kim and Y. H. Kim, “Voltammetric Approach to Redox Behavior of Various Elements in CRT Glass Melts,” J. Non-Cryst. Solid., 354 [2-9] 553-57 (2008). https://doi.org/10.1016/j.jnoncrysol.2007.07.064
  9. M. Szurman, G. Heide, G. H. Frischat, and T. Pfeiffer, “Sulphur Diffusion in Silicate Glass Melts with Particular Reference to Schott AF45 Glass,” Glass Technol.: Eur. J. Glass Sci. Technol., A 48 [5] 242-46 (2007).
  10. C. M. Jantzen, M. E. Smith, and D. K. Peeler, “Dependency of Sulfate Solubility on Melt Composition and Melt Poly-merization,” Westinghouse Savannah River Company-MS,00290, 2004.
  11. J. O. Isard, “The Mixed Alkali Effect in Glass,” J. Non-Cryst. Solid., 1 235-61 (1969). https://doi.org/10.1016/0022-3093(69)90003-9
  12. D. E. Day, “Mixed Alkali Glasses-their Properties and Use,” J. Non-Cryst. Solid., 21 343-72 (1976). https://doi.org/10.1016/0022-3093(76)90026-0
  13. M. D. Ingram, “ThE Mixed Alkali Effect Revisited-A New Look at an Old Problem,” Glastech. Ber. Glass Sci. Technol.,67 [6] 151-55 (1994).
  14. J. Duffy, “Electrochemistry of Glasses and Glass Melts, Including Glass Electrodes,” Ed by H. Bach, F. G. K. Baucke, D. Krause, Springer, 275-301 (2001).
  15. K. D. Kim, “Iron Redox Equilibrium and Diffusivity in Mixed Alkali-alkaline Earth-silica Glass Melts,” Ceramics-Silikaty, 55 [1] 54-8 (2011).

Cited by

  1. vol.49, pp.2, 2012, https://doi.org/10.4191/kcers.2012.49.2.197