Journal of the Korean Society of Hazard Mitigation (한국방재학회 논문집)

Korean Society of Hazard Mitigation (한국방재학회)
권호 표지
DOI QR코드

DOI QR Code

The Moment-Curvature Relationship of the Rectangular Ultra High Performance Fiber Reinforced Concrete Beam

초고강도 섬유보강 직사각형 콘크리트보의 모멘트-곡률 관계

  • 한상묵 (금오공과대학교 토목환경공학부) ;
  • 궈칭용 (금오공과대학교 토목환경공학부)
  • Received : 2011.04.07
  • Accepted : 2011.06.08
  • Published : 2011.06.30
⟨ Previous Next ⟩

Abstract

The flexural behavior of the UHPFRC rectangular beam which has 100 MPa, 140 MPa compressive strength were compared with that of the typical RPC rectangular beam which has same geometrical shape, prestressd force and 160 MPa compressive strength. UHPFRC beam was not reinforced at all and the variable of test is fraction of steel fiber, compressive strength of concrete, method of prestressing and ratio of prestressing bar. The behavior of UHPFRC beam was analysed by relationship of moment - curvature and load - deflection. Simple modeling of stress-strain of UHPFRC was proposed. Based on the proposed constituted, the flexural moment-curvature relationship was calculated and compared with experimental data on prestressed UHPFRC beams. Good agreement between calculated strengths and experimental data is obtained.

압축강도 100 MPa, 140 MPa 초고강도 섬유보강 콘크리트 직사각형보와 기하하적 조건 및 PS힘이 동일한 160 MPa RPC 직사각형보의 휨거동 비교를 통하여 압축강도가 낮은 초고강도 섬유보강 콘크리트 구조물의 거동 특성을 파악하였다. 직사각형보에 철근은 배근되지 않았으며 실험변수로는 강섬유, 콘크리트 압축강도, 프리스트레스 도입 방식, PS강재비 등이다. 모멘트-곡률관계와 하중-처짐관계를 통하여 압축응력이 작은 UHPC 직사각형보의 거동 특징을 분석하였다. 초고강도 섬유보강 콘크리트에 대한 간단한 형태의 응력-변형률 관계를 제안하였으며 이를 이용하여 UHPC 직사각형보에 대한 모멘트-곡률관계를 산정하였다. 실험에 의한 모멘트-곡률관계를 비교한 결과 상당히 일치함을 알 수 있었다.

Keywords

References

  1. ACI Committee 544 (1988) Design Consideration for Steel Fibre Reinforced Concrete, ACI structural Journal, Vol. 85, No. 5, pp. 563-580.
  2. Au, F.T.K. and Du, J.S. (2004) Prediction of Ultimate Stress in Unbonded Prestressed Tendons Magazine of Concrete Research, V. 56, No. 1, pp. 1-11. https://doi.org/10.1680/macr.2004.56.1.1
  3. Fischer, G., Current U.S. (2004) Guidelines on Fibre Reinforced Concrete and Implementation in Structural Design, Proceedings of the North American/European Workshop on Advances in Fibre Reinforced Concrete, BEFIB 2004, Bergamo, Italy, Sept., pp. 13-22.
  4. Lok T.S. and Xiao J.R. (1999) Flexural strength assessment of steel fibre reinforced concrete, Journal of Materials in Civil engineering, Vol. 11, No. 3, pp. 188-196. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:3(188)
  5. Srikanth, M., Rajesh, Kumar, G. and Giri, S. (2007) Moment Curvature of Reinforced Concrete Beams Using Various Confinement Models and Experimental Validation, Asian Journal of Civil Engineering, Vol. 8, No. 3, pp. 247-265.
  6. Naaman, A.E. and Alkhairi, F.M. (1991) Stress at Ultimate in Unbonded Post-Tensioning Tendons: Part 1-Evaluation of the State-of-the-Art, ACI Structural Journal, Vol. 88, pp. 641-651.
  7. Pu Qianhui, Gao Mangmang (2001) Relationship between Moment and Curvature of Partially Prestressed Concrete Members, Journal of Southwest Jiaotong University, Vol. 9, pp. 179-184.
  8. Robyn Warnock (2005) Short-Term and Time-Dependent Flexural Behaviour of Steel-Fibre Reinforced Reactive Powder Concrete Beams, Ph.D Thesis, University of New South Wales, Sydney, Australia.
  9. SETRA-AFGC (2002) Ultra High Performance Fibre-Reinforced Concretes: Interim recommendations, France.
  10. Voo, Y.L. and Foster, S.J. (2008) Shear Strength of Steel Fiber Reinforced Ultra-High Performance Concrete Beams Without Stirrups, 5th Int'l Specialty Conference on Fibre Reinforced Materials: 28th-29th August, 2008, Singapore, pp. 177-184.